• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.583-594
• /
• 1989

The strong nonliner dynamic behavior of mechanical systems in the presence of clearances are studied. The nonlinearity is induced from the assumed symmetric piecewise-linear characteristics for stiffness and damping by the contact and uncontact. Based on Stoker's assertion concering the reasoning beyond the occurrence of subharmonics, the nonlinear differential equation is converted to four nonlinear algebraic equations form the boundary conditions at the contact points. For a single contact per half exciting period, under the assumption of symmetric response, the steady-state solutions obtained are in agreement with those of numerical integration. Also a nondimen-sionalized formulation is made for the purpose of parametric studies.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.507-520
• /
• 2016

This research was performed to evaluate incineration facilities with different scale and type using performance index. Incineration facilities of 28 units, which occupying about 15% of 184 units in nationwide, were selected for questionnaire survey. The facilities were classified in scale with large(${\geq}100t/d$), middle(50~<100 t/d), small(<50 t/d) ones, and in type with stoker, pyrolysis, fluidized bed. Performance index was composed of technological, economical, and environmental items, which have 6, 10, and 30 kinds of questions, respectively. As a result of scale evaluation, large scale facility has higher score than small one in all technological, economical, and environmental items. In overall evaluation of the facilities with different type, stoker incinerator has higher score of 65.3 than 59.0 of fludized bed and 58.3 of pyrolysis. It was shown that there was significant difference in economical evaluation field, in all technological, economical, and environmental items.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.22-29
• /
• 2009

To design and construct a moving bed stoker incinerator for incineration treatment of the domestic oil fly ash, operating condition and moving bed area of incinerator were determined by performing incinerate experiment of the oil fly ash in the muffle furnace which simulates moving bed stoker incinerator in all conditions. Incineration process of the oil fly ash could be divided into 3 stages, every stage needs the appropriate operating condition for effective incineration. The optimum content of water in the heavy oil fly ash was found to be 20 wt% to prevent the ash from flying and reduce the volume. Science combustion rate of oil fly ash depends on the oxygen content, the incinerator must have a equipment to control the oxygen content in the combustion air. The optimum temperature was $750{\sim}800^{\circ}C$ in order to prevent adhesion to the stocker and evaporation of metal compounds of low melting point. Uniform combustion reaction and acceleration of combustion rate required agitation during the combustion of oil fly ash. The incineration rate was $12.53kg/m^2hr$ and the working area of moving bed incinerator was found to be $60m^2$ to incinerate 18 tons of oil fly ash per day.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.419-424
• /
• 2018

Match cut is the montage technique that is widely used in the image media. This technique is versatile to generate the receivers a variety of meanings. In this article, the match cut shorts applied in the movie, Bram Stoker's Dracula, were analyzed based on the meanings occurred between the shorts. In addition, the analysis methods were based on the philosophical issues of Gilles Deleuze which had been analyzed focusing on the generation competency. Also, Francis Bacon's paintings, 'painting' (1946) and 'self-portrait' (1969) demonstrating similar meanings were compared to assist understanding. Upon the analyses of these two media, the meanings of 'becoming' that had the feature of nomadism between the shorts and occurred in the process of combined generation were analyzed. Therefore, match cut occurred in the image media was found to function to the receivers in a variety of ways and the degree of its utilization was not limited upon this analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.133-138
• /
• 2002

A 3-D axisymmetric computer program is developed to predict the NO behavior in SNCR system for the stoker incinerator with the waste treatment capacity, 200ton/day. To this end a turbulent reacting flow field calculation is made using proper assumption and empiricism. The stoker bed is assumed to be a homogeneous waste-volatilized gaseous state. The initial composition or reactants are assumed based on the data of the ultimate analysis. Turbulent is resolved by k-e model and turbulent reaction is handled by eddy-breakup model harmonized with empirical chemistry data for gaseous combustion, NO and urea reaction. The liquid droplet is traced by Lagrangian method incorporated by aerodynamic drag, Coriolis and crntrifugal forces. Radiation is treated by sensible heat loss model. Calculation results are in good agreement with experimental data at the outlet of post combustion chamber in Daejon 4th industrial complex. The flue gas shows the temperature range of $900\sim1000^{\circ}C$, velocity of 5m/s and NO concentration of 140ppm at the exit while the measured temperature, flue gas velocity and NO concentration are $967^{\circ}C$, $3\sim4m/s$ and $100\sim200ppm$respectively. Using the developed computer program a parametric study has been made with the variation of heat content of waste, castable length and SNCR variables for the determination of proper injector location. In general, the calculated results are consistent and physically acceptable.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.111-117
• /
• 2003

The present study discusses about the combustion and thermal flow characteristics of a G+R type incinerator, which is under construction for MAPO Incineration system, to evaluate the effects of various operating and design parameters. A bed combustion model is developed to simulate the waste bed combustion on the stoker. The effects of waste composition and primary air distribution are estimated. The results of the waste bed combustion model is applied to CFD(computational fluid dynamics) simulation, which simulates the detail of the thermal flow in the combustion chamber. The effects of bypass damper opening ratio, primary air distribution, and secondary air jet configuration are discussed.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.2
• /
• pp.337-346
• /
• 2001

A linearization owing to Oseen originally is performed to study the recirculating Navier-Stokes flows at high Reynolds numbers. The procedure is generalized to produce higher order asymptotic expansion for the flow velocity. We call this the Oseen-type expansion of the given flow. As a concrete example, the velocity of a steady Navier-Stockes flow due to a swimming flexible sheet in two-dimensional infinite strip domain is calculated by an asymptotic expansion technic with two-parameters, the Reynolds number R and the perturbation parameter $\varepsilon$ first and then R secondly. The asymptotic result is up to second order in $\varepsilon$.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.785-799
• /
• 1996

The incineration tests of mixed industrial wastes using the stoker type incinerator are carried out to investigate the partitioning characteristics of heavy metals during incineration. The results obtained from this study are as follow. The partitioning characteristics of heavy metals throughout this incinerator are found that, at given condition of $700^{\circ}C$, the elements with the relatively high boiling point such as Cr, Cu and Pb are partitioned into a bottom ash, a fry ash captured tv cyclone, and a flue gas stream, 67~88%, 2~19% and 6~16% of initial amount entering the incinerator, respectively, but the Cd and Hg of 75~81% is vaporized into the flue gas. It appears that the partitioning characteristics according to the particle size of ash is different between the bottom ash and the fly ash. For bottom ash, the fraction of partitioning into 75${\mu}{\textrm}{m}$ oversized particles is reatively high. For fly ash, the characteristics of distributions with the particle size can not be clearly shown.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1156-1163
• /
• 2006

본 논문은 Overhead Hoist Transport(OHT)를 운반 장비로 사용하는 반도체 생산 라인 자동물류시스템에서의 차량배차문제를 다룬다. 고려하는 반도체 라인은 18 개의 bay 와 6 개의 stoker 로 구성되며 160 대 이상의 OHT를 가진다. 자동물류시스템은 최소한의 OHT 대수로 하루 100,000 건의 웨이퍼를 이동시켜야 하며 반송시간과 편차를 최소화하여야 한다. 전통적인 차량배차규칙에서는 차량이 어떤 작업에 할당되면 그 관계가 변하지 않는 반면, 본 연구에서는 시스템 상황의 변화에 따라 차량을 작업에 재할당하는 방법을 제안한다. 시뮬레이션을 통해 제안된 방법을 shortest travel distance first 규칙과 비교한 결과, 필요한 OHT 대수, 반송시간과 반송시간의 편차 측면에서 획기적인 효용성 향상을 보였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.842-850
• /
• 2006

The role of chlorination reactions in the formation of polychlorinated dibenzofurans (PCDFs) in a municipal waste incinerator was assessed using a chlorination model for predicting PCDF isomer distributions. Complete distributions of PCDF congeners were obtained from a stoker-type municipal waste incinerator operated under 13 test conditions. Samples were collected from the flue gas prior to the gas cleaning system. While total PCDF yields varied by a factor of five to six, the distributions of congeners were similar. A chlorination model, dependent only on the observed distribution of monochlorinated isomers, was developed to predict the distributions of poly-chlorinated isomers formed by chlorination of dibenzofuran (DF). Agreement between predicted and measured PCDF isomer distributions was high for all homologues, supporting the hypothesis that DF chlorination can play an important role in the formation of PCDF byproducts.