• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.357-357
• /
• 2000

In this study, we consider a multi-input multi-output styrene polymerization reactor system for which the monomer conversion and the weight average molecular weight are controlled by manipulating the jacket inlet temperature and the feed flow rate. The reactor system is identified by using a linear subspace identification method and then the output feedback model predictive controller is constructed on the basis of the identified model. Here we use the Best Linear Unbiased Estimation (BLUE) filter as a stochastic estimator instead of the Kalman filter. The BLUE filter observes the state successfully without any a priori information of initial states. In contrast to the Kalman filter, the BLUE filter eliminates the offset by observing the state of the augmented system regardless of a priori information of the initial state for an integral white noise augmented system. A BLUE filter has a finite impulse response (FIR) structure which utilizes finite measurements and inputs on the most recent time interval [i-N, i] in order to avoid long processing times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제14권2호
• /
• pp.155-163
• /
• 1989

For a one link flexible arm control, quadratic optimal control is applied to the dynamic modilling which is derived from an assumed mode method. For the quadratic optimal control technique, the full state feedback must be obtained for closing the control loop, but because some of the states in the flexible system(e.g. the rate of change of the time dependent variables of the mode shapes) can not be directly measured, state estimator is necessary to achieve the practical implementation of the optimal controller. When disturbances and measurement noise occur, stochastic approach must be applied to estimating the states of the system. Kalman Filter is used as a stste estimator. Through the simulation, the flexible system with state estimator is compared with the flexible system assuming that all the states can be measured.

• Earthquakes and Structures
• /
• 제24권1호
• /
• pp.1-9
• /
• 2023

A model for calculating structure interacted mechanics is proposed. A structural interaction model and controller design based on tuned mass damping (TMD) was developed to control the induced vibration. A key point is to introduce a new analytical model to evaluate the properties of the TMD that recognizes the motion-dependent nonlinear response observed in the simulations. Aiming at the problem of increased current harmonics and low efficiency of permanent magnet synchronous motors for electric vehicles due to dead time effect, a dead time compensation method based on neural network filter and current polarity detection is proposed. Firstly, the DC components and the higher harmonic components of the motor currents are obtained by virtue of what the neural network filters and the extracted harmonic currents are adjusted to the required compensation voltages by virtue of what the neural network filters. Then, the extracted DC components are used for current polarity dead time compensation control to avert the false compensation when currents approach zero. The neural network filter method extracts the required compensation voltages from the speed component and the current polarity detection compensation method obtains the required compensation voltages by discriminating the current polarity. The combination of the two methods can more precisely compensate the dead time effect of the control system to improve the control performance. Furthermore, based on the relaxed method, the intelligent approach of stability criterion can be regulated appropriately and the artificial TMD was found to be effective in reducing cross-wind vibrations.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제8권2호
• /
• pp.70-81
• /
• 1998

This paper proposes an accurate and cost-effective COA defuzzifier of fuzzy logic controller (FLC). The accuracy of the proposed COA defuzzifier is obtained by involving both membership values and spans of membership functions in calculating a crisp value. The cost-effectiveness of the proposed COA defuzzifier is obtained by replacing the division in the COA defuzzifier by finding an equilibrium point of both the left and right moments. The proposed COA defuzzifier has two disadvantages that it ncreases the hardware complexity due to the additional multipliers and it takes a lot of computation time to find the moment equilibrium point. The first disadvantage is overcome by replacing the multipliers with the stochastic AND operations. The second disadvantage is alleviated by using a coarse-to-fine searching algorithm that accelerates the finding of moment equilibrium point. Application of the proposed COA defuzzifier to the truck backer-upper control problem is performed in the VHDL simulation and the control accuracy of the proposed COA defuzzifier is compared with that of the conventional COA defuzzifier in terms of average tracing distance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제43권4호
• /
• pp.35-44
• /
• 2006

The network induced transmission delay deteriorates the performance and stability of the real-time distributed control system on LonWorks over IP (LonWorks/IP) virtual device network (VDN). LonWorks/IP virtual device network is an integrated form of LonWorks device network and IP data network. The time delay in servo control on the LonWorks/IP-based VDN has highly stochastic nature. In the real-time distributed servo applications for predictive maintenance on the factory floor, timely response is essential.