• 한국환경보건학회지
• /
• 제33권5호
• /
• pp.451-455
• /
• 2007

This study was performed to evaluate the effects of input ratios of bulking material in aerobic composting of food wastes on variation of colony forming units(CFU) of fungi. Wood chips were used as a bulking material. Volume ratios of food wastes to wood chips in reactor of Control, WC-1 and WC-2 were 10/0, 10/5 and 10/10, respectively. Reactors were operated for 24 days with I hour stirring by 1rpm and 2 hours of the forced aeration rate of $80L/min{\cdot}m^3$ per day. WC-2 reached high temperature range faster than WC-1, and the maximum temperature of WC-2 was higher than that of WC-1. WC-2 reached high pH range faster than WC-1. and the maximum pH of WC-2 was higher than that of WC-1. WC-2 reached high Log(CFU/gram) range faster than WC-I, and the maximum Log(CFU/gram) of WC-2 was higher than that of WC-1. These all mean that the reaction velocity of composting of WC-2 was faster than that of WC-1. The profile of fungi changes in Log(CFU/gram) was similar to that of temperature changes (r=0.8861) not pH changes (r=0.1631).

• 한국주조공학회지
• /
• 제16권6호
• /
• pp.556-564
• /
• 1996

Variation of shape and size of solid particles and solute redistribution in Mg-9wt.%Al, AI-4.5wt.% Cu, and AI-7wt.%Si alloys were investigated when they were heated to semi-solid temperatures and held without stirring. In the case of Mg-9wt.% Al and Al-4.5wt.%Cu alloys, the polygonal shaped solid particles were agglomerated with non-uniform distribution, and there were no disappearance of the solid/solid boundary until the end of melting. But in the case of an Al-7wt.%Si alloys, two or three spherical shaped particles were coalesced or separated individually, and the coalesced particles had no solid/solid interface on the contrary to the prevous case. The maximum size of solid particles during isothermal heating at high temperature was smaller than that at lower temperature, but the time required to reach the maximum size at high temperature was shorter than that at lower temperature. The concentrations of main solute atom whose distribution coefficient is lower than 1, decreased in the primary solid particles as the liquid fraction increased, and the gradient of solute concentration was steeper in Mg-9wt.%Al alloy and Al-4.5wt.%Cu alloy than that of Al-7wt.%Si alloy.

• 공업화학
• /
• 제20권5호
• /
• pp.532-535
• /
• 2009

본 연구에서는 식물성 오일의 에스테르화 반응에 초음파에너지를 도입하여 지방산 methyl ester를 제조하였다. 초음파 에너지가 에스테르화 반응에 도입될 경우 반응온도의 가열효과뿐만 아니라 교반효과를 동시에 가져올 수 있어 반응시간 단축 및 지방산 methyl ester 수율의 증가를 가져올 수 있다. 그러나 초음파에너지가 에스테르화 반응에 도입될 때 연속적인 초음파에너지의 조사로 인한 반응온도의 계속적인 상승이 문제점으로 확인되었다. 따라서 본 연구에서는 cooling system을 이용하여 반응온도의 상승을 억제하여 실험을 수행한 결과 기존공정보다 빠른 30 min 만에 93%의 지방산 methyl ester 수율을 확인하였다.

• 한국주조공학회지
• /
• 제20권4호
• /
• pp.269-276
• /
• 2000

So far, the study on semi-solid process has been carried out to develop and research new advanced materials without some casting defects. In this study, A356 billets consisted of various dendritic shapes were prepared using electro-magnetic stirring process continuously. As-cast respectively has liquidus temperature of $625.6^{\circ}C$ and solidus temperature of $573.55^{\circ}C$ A356 slugs were reheated homogeneously at different temperatures of 580, 590 and $605^{\circ}C$, followed by squeezing in a mold insulated with applied pressures(0, 25, 50 and 70 MPa). In order to investigate on aging responce for casts, 50 MPa squeezed specimen among all specimens was prepared in aging treatments, which conditions are aging temperature of $160^{\circ}C$ and holding times of 0, 45, 90, 270, 360, 720, 1440 and 2880 min after solution treatment ($540^{\circ}C$ for 10 hr). SSM ingot with the output velocity of 150mm/min appeared more spheroidal shape and fine structure than that with the output velocity of 250 mm/min. According to increasing in reheating temperature, numbers of fatigue cycles, U.T.S and elongation increased at same time.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.550-557
• /
• 2002

광촉매용 TiO$_2$코팅 석탄회 복합체를 침전제적하법을 이용하여 합성한 후, $700^{\circ}C$에서 2시간 열처리하여 제조하였다. 석탄회 표면의 TiO$_2$ 입자 석출상태와 결정상은 반응용액의 pH, 침전제인NH$_4$HCO$_3$의 주입속도, 교반속도, 반응온도 및 TiC1$_4$ 의 첨가량에 영향을 받았다. NH$_4$HCO$_3$의 주입속도=1.0ml/min, 반응용액의 pH=6, 교반속도=1,000rpm 및 반응온도=8$0^{\circ}C$인 석탄회의 표면에는 약 10m의 TiO$_2$ 입자가 균일하게 석출되었으나,NH$_4$HCO$_3$의 주입속도=0.3 및 0.5ml/min, 반응용액의 pH=2 및 11 ,교반속도=300~500rpm 및 반응온도=5$0^{\circ}C$ 이하인 석탄회의 표면에는 불균일한 TiO$_2$ 입자의 석출이 관찰되었다. NH$_4$HCO$_3$의 주입속도와 반응온도가 증가하고 TiC1$_4$의 농도가 감소함에 따라 석탄회 표면에 석출된 anatase상의 결정성은 열처리온도에 따라 증가하였으나,800"C에서 rutile로 전이하였다 반응온도와 NH$_4$HCO$_3$의 주입속도 및 Tic14의 농도가 증가함에 따라 rutile상이 생성되었다. $700^{\circ}C$에서 2시간 열처리하여 약 21m의 anatase상 TiO$_2$ 입자가 코팅된 석탄회 복합체는 1.25g/㎤의 밀도, 82.8%의 강도 및 69.5Lab의 백색도를 나타내었으며, 광촉매로 응용이 가능하였다.능하였다.

• 대한의용생체공학회:의공학회지
• /
• 제34권3호
• /
• pp.117-122
• /
• 2013

Hyaluronic acid(HA) microbeads were synthesized by dropping the sodium hyaluronate(Streptococcus) solutions in NaOH into a solution mixture of divinyl sulfone(DVS) in 2-methyl-1-propanol, followed by stirring, cleaning and drying process at room temperature. The initial experimental conditions are crosslinking time(CLTi) of 5 h, crosslinking temperature(CLTe) of room temperature, injection air pressure(IAPr) of 5 psi, and DVS concentration( DVSc) of 0.2 vol%, respectively. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the size of the beads. The microbead size pattern was not regular to function of the degree of crosslink. It was observed that the swelling ratio, the degree of crosslink, and the pore size can be controlled by adjusting the CLTi, CLTe and DVSc. Among the parameters investigated, the smallest bead size can be achieved by varying the CLTi parameter. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by varying CLTe.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.116-121
• /
• 2003

In this study, the thermal degradation process has been investigated at various reaction temperature$(350{\sim}400^{\circ}C)$ and times$(30{\sim}120\;min)$ in order to recycle waste plastic films as solid state wax. Waste plastic films were easily melted by adding a small amount of waxes. The effects of wax addition and nitrogen flow rate on their thermal degradation properties were investigated. FT-IR, GPC and viscometer were used to analyze properties of the solid wax including the structure, molicular weight distribution and melt viscosity. The average molecular weight of solid wax was decreased with increasing the reaction time, temperature and amount of wax added, Also, the viscosity of solid wax decreased with increasing the stirring speed at a constant reaction temperature and time, and its viscosity got close to zero above $390^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.190-190
• /
• 2010

Zinc oxide is the most attractive material due to the large direct band gap (3.37 eV), excellent chemical and thermal stability, and large exciton binding energy (60 meV). Recently, ZnO nanorods were used as the high efficient antireflection coating layer of solar cells based on silicon (Si). In this reports, we studied the effects of rapid thermal annealing (RTA) treatment on optical properties of ZnO nanorods. For fabrication of ZnO nanorods, there are many methods such as hydrothermal method, sol-gel method, and metal organic chemical vapor deposition method. Among of them, we used the conventional wet chemical method which is simple and low temperature growth. In order to synthesize the ZnO nanorods, the ZnO films were deposited on Si substrate by RF magnetron sputtering at room temperature and the samples were dipped to aqua solution containing the zinc nitrate and hexamethylentetramines (HMT). The synthesis process was achieved in keeping with temperature of $90-95^{\circ}C$ and under constant stirring. The morphology of ZnO nanorods on glass and Si was characterized by scanning electron microscopy. For the analysis of antireflection performance, the reflectance and transmittance were measured by spectrophotometer. And for analyzing the effects of RTA treatment on ZnO nanorods, crystalline properties were investigated by X-ray diffraction measurements and optical properties was estimated by photoluminescence spectra.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 고액공존금속의 성형기술 심포지엄(III) SYMPOSIUM ON SEMISOLID FORMING TECHNOLOGY(III)
• /
• pp.15-32
• /
• 1999

A relationship between stress and stain is very important to design a die to avoid defects of products during semi-solid forming process. Since the liquid will be of eutectic composition in alloys liquid segregation will result in significant or undesirable situation. The materials used in this experiment are A 357. A390, Al2024 alloys that is fabricated by the electro-magnetic stirring process from Pechiney in France. The compression test was performed by induction heating equipment and MTS. In order to prevent the liquid segregation these measured temperature would be useful to control of strain rate during compression test. The liquid segregation is controlled as change of the strain rate and solid fraction during the compression process, The characteristics of flow between solid and liquid phase considering liquid segregation is examined through the above experiments. In the case of medium and high volume fractions of solid the distribution of strain rate is calculated by using compression test data of semi-solid materials (SSM). The thixoforming experiments with the designed die are carried out successfully. The die filling patterns of SSM for variation of die temperature and pressing force have been investigated. The hardness of the thixoformed scroll products is evaluated in terms of the microstructure for each position.

• Preventive Nutrition and Food Science
• /
• 제16권1호
• /
• pp.67-73
• /
• 2011

The objective of this research was to investigate the effects of soaking time (6, 12 and 24 hr) and steeping temperature (25, 30 and $35^{\circ}C$) on germination time, germination percentage and weight loss of wheat and barley. Changes in chemical composition (such as protein, fat, and ash), reducing sugar content, enzyme activity and pasting profile and GABA ($\gamma$-animobutyric acid) content of germinated wheat and barley were also evaluated. The results clearly suggest that the short soaking time and lower steeping temperature significantly decreased germination time and weight loss, while germination percentage increased. Regarding the chemical composition, the protein content of wheat and barley was slightly increased after germination but there was no significant difference in content of crude fat and ash of both germinated cereals. The reducing sugar content of both germinated cereals decreased as the steeping temperature increased from $25^{\circ}C$ to $35^{\circ}C$. Increasing soaking time and steeping temperature led to increased amylase activity, and also corresponded to reduced paste viscosity. The highest GABA content that occurred with soaking times of 6 and 12 hr and a steeping temperature of $35^{\circ}C$ was 1,467.74 and 1,474.70 ${\mu}g/g$ for germinated wheat and 2,108.13 and 1,691.85 ${\mu}g/g$ for germinated barley. This study indicated that the optimum germination process for wheat and barley is a low steeping temperature and a short soaking time.