• 대한토목학회논문집
• /
• 제40권2호
• /
• pp.167-175
• /
• 2020

1979년 Herman과 Prigogine에 의해 제안된 Two-fluid Model은 도시부 네트워크의 운영성을 설명하는 거시적인 모형으로서 네트워크 내 정지차량 비율과 평균 주행속도의 관계에 기초하고 있다. 이러한 Two-fluid Model의 파라미터는 교통류 특성에 따라 변화하므로 파라미터를 통한 운영성 분석 시 교통류 상태 변화를 규명하는 단계가 수반되어야 한다. 이에 본 연구는 Two-fluid Model의 파라미터를 활용하여 강우에 따른 교통사고 위험도를 비교하였고, 이로 인한 주행 행태가 도시부 네트워크의 운영성에 영향을 미침을 확인하였다. 먼저 Two-fluid Model 파라미터 추정결과, 맑은 날 대비 비가 온 날의 네트워크 운영성이 저하된 것으로 나타났다. 이후 운전자의 교통사고 위험인지 모형 계수를 산출하고 강우 여부에 따른 교통사고 위험도와 그에 따른 주행 행태 변화를 분석하였다. 오전·오후 시간대 모두 운전자는 맑은 날과 동일한 속도를 유지하였을 때 비가 온 날의 교통사고 위험도가 높을 수 있기 때문에, 위험도를 낮추기 위해 주행속도를 감속하는 경향을 보였다. 그러나 맑은 날 보다 비가 온 날의 위험도는 여전히 높은 것으로 파악되었다. 향후에는 도시부 교통망의 거시적 운영성과 사고 위험도 간의 관계를 보다 다양한 네트워크에서 분석하고 동시에 개선할 수 있는 방안을 연구해볼 필요가 있겠다.

• 한국유체기계학회 논문집
• /
• 제15권3호
• /
• pp.64-69
• /
• 2012

Generally the Shrouded type impeller is considered to free from the loss of tip leakage flow, but it is actually not possible to complete sealing between the rotating impeller and the sealing which is stay still. As a result, there is the possibility of flow leaking between impeller exit to entrance, especially with high pressure ratio compressor machine. The Cavity leakage flow is expected to influence negative effect on a machine performance and also inner flow structure. In this study, Impeller with shroud-casing gap leakage flow is simulated by numerical method (Using CFX 12.1). The influence of leakage flow on compressor performance and efficiency will be analysed, also detail flowfield change will posted.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.219-220
• /
• 2013

The phenomenology of liquid breakdown has been an area of interest for many years but is still not fully understood. Moreover, it was known that the behavior of magnetic nanoparticles in transformer oil could affect the dielectric breakdown voltage positively or negatively. In this study, we have imaged the magnetic nanoparticles in a transformer oil in-situ using an optical microscopic set-up and a microchannel according to the electric and magnetic fields applied. And we have calculated numerically dielectrophoresis and magnetophoresis forces, which must be the driving mechanisms to move magnetic nanoparticles in the fluid. It was found that when the electric field is applied the magnetic nanoparticles in the fluid experience an electrical force directed toward the place of maximum electric field strength. And when the external magnetic field is applied, the magnetic nanoparticles form long chains oriented along the direction of the field.

• Wind and Structures
• /
• 제6권1호
• /
• pp.41-52
• /
• 2003

Rain-wind induced vibrations of cables are a challenging problem in the design of cable-stayed bridges. The precise excitation mechanism of the complex interaction between structure, wind and rain is still unknown. A theoretical model that is able to accurately simulate the observed phenomena is not available. This paper presents a mathematical model describing rain-wind induced vibrations as movement-induced vibrations using the quasi-steady strip theory. Both, the vibrations of the cable and the movement of the water rivulet on the cable surface can be described by the model including all geometrical and physical nonlinearities. The analysis using the stability and bifurcation theory shows that the model is capable of simulating the basic phenomena of the vibrations, such as dependence of wind velocity and cable damping. The results agree well with field data and wind tunnel tests. An extensive experimental study is currently performed to calibrate the parameters of the model.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.321-325
• /
• 2006

Because strong wind is one of the few forces that, although considered in container crane design, still cause significant damage, a container crane was tested to investigate wind load characteristic in uniform flows. So, this study measured an external point pressure at the each members of a container crane according to a wind direction and a shape of members in a wind-tunnel test. The result of this test was compared to those of computation fluid dynamics using a CFX 10. The scale of a container crane model for wind tunnel test applied similarity scales to consider the size of the wind tunnel test section and the boundary condition for CFD is like wind tunnel test.

• East Asian Economic Review
• /
• 제21권3호
• /
• pp.259-274
• /
• 2017

This study estimates the random utility function of fluid milk using 1,165 survey responses in Laos. It finds that both products' attributes and individual characteristics affect consumers' preference for the milk and the hypothetical brand of Laos-Korea has a potential compared to four real dairy products. Results also show that calories have a positive relationship with consumer's preference while the price and fat content have a negative one. The decision for choosing each brand is significantly affected by individual characteristics such as gender, age, whether or not respondents live with their children, the level of education, income, the frequency of purchasing milk per week, and the region where they live. The preference for five brands appears in the order of Foremost, Nabong, Thai-Danish, Meiji, and Lao-Korea, and probabilities of purchasing each brand at the mean level are 30.9%, 17.48%, 21.48%, 15.0% and 10.39%, respectively. Nabong that was Lao national milk brand still has a significant market power even though it was closed in 2008. The policies to promote milk industry by implementing its national milk brand again would be more effective if it focuses on the young generation, female consumers, families with children, quality of dairy products, and Vientiane capital areas.

• Archives of Plastic Surgery
• /
• 제45권4호
• /
• pp.379-383
• /
• 2018

Septoplasty/septorhinoplasty is a common ear, nose and throat procedure offered for those patients with deviated septum who are suffering from nasal obstruction and functional or cosmetic problems. Although it is a basic and simple procedure, it could lead to catastrophic complications including major skull base injuries which result in cerebrospinal fluid (CSF) leaks. We describe two different cases of traumatic CSF leaks following septoplasty/septorhinoplasty at two different sites. The first patient suffered a CSF leak following septoplasty and presented to Alexandria University Hospital. The leak was still active at presentation and identified as coming from a defect in the roof of the sphenoid sinus and was repaired surgically. The second patient presented 4 days after her cosmetic septorhinoplasty with a CSF leak and significant pneumocephalus. She was managed conservatively. Understanding the anatomical variations of the paranasal sinuses and implementing proper surgical techniques are crucial in preventing intracranial complications when performing either septoplasty or septorhinoplasty. A good quality computed tomography of the nose and paranasal sinuses is a valuable investigation to avoid major complications especially CSF leaks following either procedure.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.303-314
• /
• 2009

The present paper shows the results of numerical and experimental modal analyses of Francis runners, which were executed in air and in still water. In its first part this paper is focused on the numerical prediction of the model parameters by means of FEM and the validation of the FEM method. Influences of different geometries on modal parameters and frequency reduction ratio (FRR), which is the ratio of the natural frequencies in water and the corresponding natural frequencies in air, are investigated for two different runners, one prototype and one model runner. The results of the analyses indicate very good agreement between experiment and simulation. Particularly the frequency reduction ratios derived from simulation are found to agree very well with the values derived from experiment. In order to identify sensitivity of the structural properties several parameters such as material properties, different model scale and different hub geometries are numerically investigated. In its second part, a harmonic response analysis is shown for a Francis runner by applying the time dependent pressure distribution resulting from an unsteady CFD simulation to the mechanical structure. Thus, the data gained by modern CFD simulation are being fully utilized for the structural design based on life time analysis. With this new approach a more precise prediction of turbine loading and its effect on turbine life cycle is possible allowing better turbine designs to be developed.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.63-68
• /
• 1975

Flacherie of all other silkworm diseases greatly affects cocoon crop as it is far-reaching and wide spreading. Fleacherie which kills silkworms caused by bacteria can be classified as bacterial digestive organ disease, and "Sotto" disease. Bacterial digestive organ disease is caused by the bacteria living in the silkworms alementary canal and a majority of flacherie belongs to this disease. Septicemia is caused by bacterias breeding in silkworms body fluid but its attach is comparatively limited during the larva period. "Sotto" disease is caused by eating mulberry leaves infected with bacteria which produce toxin and silkworms are intoxicated and killed by the toxin. The cause of flacherie is mainly due to a poor environment. The unclean and unsanitary silkworm rearing beds help bacterias breeding and bacteria enter silkworms body through mouth organ or skin. The present study is to investigate various causes of flacherie by means of pulverization of silkworm. Filtrated fluid is extracted by centrifuge and hypodermic of peroral inoculation-is given to young and medium silkworms of spring and autumn. The gained results of the experiment are summarized as follows： 1. Silkworms infected with flacherie were pulverized and their filtrated fluid was extracted by centrifuge and inspected under microscope to find polyhedron from the fluid. 2. The experimenting group of peroral inoculation. a) From the third day of peroral inoculation silkworms appetite generally decreased and ate less compared with the control group. b) After 7 days of the inoculation silkworms suffered from empty head, loose bowels and fainting. c) Some of the silkworms still ate but as were shown in Fig. 3 and 4 some dwarfish silkworms were found. d) There was no remarkable difference between 1st and 2nd instar inoculation groups. e) There was a tendency that the number of diseased silkworms was decerased as the increase of instars. 2. The experimental group of hypodermic inoculation a) Both of 3rd and 4th instar inoculation groups showed no remarkable singularity and the number of diseased silkworms decreased. b) The rate of diseased silkworms was comparatively low because the body fluid was acidy or toxin was hard soluble. Hypodermic inoculation could not give much harm to the silkworms compared to peroral inoculation.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.539-542
• /
• 2006

A volute (or scroll) of a centrifugal compressor collects the flows from impeller or diffuser, and passes it to a pipe at the exit. This flow still contains some kinetic energy which is not converted into pressure at diffuser, thus volute designer must concern the way to minimize losses. This study defines some variables which determine the shape of volute, and carry out computational analysis based on Design of Experiment to optimize the performance of volute.