• 한국구조물진단유지관리공학회 논문집
• /
• 제20권5호
• /
• pp.18-25
• /
• 2016

본 연구는 MIDAS-Gen을 사용하여 골조-전단벽 구조에서 상부 전단벽의 미배치에 대한 구조적인 효과를 검토하였다. 본 연구에서는 해석 변수로 상부 전단벽의 미배치 층수, 상하 기둥 단면 치수의 변화, 상하 전단벽 두께 치수의 변화를 설정하였다. 골조-전단벽 구조에서 상부 전단벽의 미배치에 대한 구조적인 효과를 검토하기 위하여 전단벽의 미배치에 따른 전단력/전도모멘트 분포, 전단벽의 변곡점, 수평강성에 대하여 비교분석하였다. 본 연구의 결과는 골조-전단벽 구조에서 상부 전단벽의 미배치가 수평강성과 같은 구조성능에 미치는 영향을 정량적으로 제시하였다. 더욱이 본 연구의 결과는 합리적인 골조-전단벽 구조를 위한 구조설계 자료를 제공하는데 도움이 된다고 확인하였다.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.69-78
• /
• 1999

구조물이 지진과 같은 수평력을 받으면 골조의 기둥은 횡이동을 하게 되고 이 횡이동이 크면 골조는 불안정 좌굴, 초기항복, 골조전체의 강성이 감소하게 된다. 본 연구에서는 이러한 골조의 기둥이 횡이동에 의해 수평력과 축력을 동시에 받는 강골조를 대상으로하여 골조강성의 저하, 보와 기둥의 상대적인 강성비, 세장비효과, 하중조건 등을 고려한 다양한 해석모델을 상정하여 수치해석을 실시했다. 그 해석결과를 분석하여 강골조의 최대수평내력을 평가하고, 기둥의 세장비 제한치를 구하는 절차에 대해서도 검토한다. 해석에 있어서는, 골조의 $P-{\Delta}$효과를 고려해서 기발표된 저자의 탄소성해석법을 이용하여 일정한 축력하에 점증의 수평력을 골조에 가했으며, 최대내력후의 해법으로서 일반역행렬을 응용했다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권3호
• /
• pp.106-114
• /
• 2006

본 논문에서는 역강성법을 비좌굴 가새골조시스템의 내진설계에 적용하여 목표 변위를 만족시키는 비좌굴 가새의 단면적을 산정하였으며, 기존 연구와 비교하여 타당성을 검토하였다. 본 설계 방법은 개념이 직관적이고 적용이 간편하며, 고차모드 고려가 가능하고 각 층의 연성도를 개별적으로 조절할 수 있는 장점이 있다. 각 모델에 본 설계법을 적용한 결과, 전반적으로 목표변위 증가에 따라 가새 단면적이 감소하지만 층수와 연성도의 증가에 따라 일부층에서 오히려 가새 단면적이 증가하는 것을 확인하였다. 또한 항복 후 강성비의 변화가 단면적에 끼치는 영향은 가새의 항복 후 강성비가 작은 경우 더 민감한 차이를 보이는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.317-331
• /
• 2014

An experimental study was performed to investigate the seismic performance of solid steel reinforced concrete (SRC) frames with special-shaped columns that are composed of SRC special-shaped columns and reinforced concrete beams. For this purpose, two models of two-bay and three-story frame, including an edge frame and a middle frame, were designed and tested. The failure process and patterns were observed. The mechanical behaviors such as load-displacement hysteretic loops and skeleton curves, load bearing capacity, drift ratio, ductility, energy dissipation and stiffness degradation of test specimens were analyzed. Test results show that the failure mechanism of solid SRC frame with special-shaped columns is the beam-hinged mechanism, satisfying the seismic design principle of "strong column and weak beam". The hysteretic loops are plump, the ductility is good and the capacity of energy dissipation is strong, indicating that the solid SRC frame with special-shaped columns has excellent seismic performance, which is better than that of the lattice SRC frame with special-shaped columns. The ultimate elastic-plastic drift ratio is larger than the limit value specified by seismic code, showing the high capacity of collapse resistance. Compared with the edge frame, the middle frame has higher carrying capacity and stronger energy dissipation, but the ductility and speed of stiffness degradation are similar. All these can be helpful to the designation of solid SRC frame with special-shaped columns.

• Steel and Composite Structures
• /
• 제22권5호
• /
• pp.1055-1071
• /
• 2016

The paper presents an innovative steel moment frame with the replaceable reinforced concrete wall panel (SRW) structural system, in which the replaceable concrete wall can play a role to increase the overall lateral stiffness of the frame system. Two full scale specimens composed of the steel frames and the replaceable reinforced concrete wall panels were tested under the cyclic horizontal load. The failure mode, load-displacement response, deformability, and the energy dissipation capacity of SRW specimens were investigated. Test results show that the two-stage failure mode is characterized by the sequential failure process of the replaceable RC wall panel and the steel moment frame. It can be found that the replaceable RC wall panels damage at the lateral drift ratio greater than 0.5%. After the replacement of a new RC wall panel, the new specimen maintained the similar capacity of resisting lateral load as the previous one. The decrease of the bearing capacity was presented between the two stages because of the connection failure on the top of the replaceable RC wall panel. With the increase of the lateral drift, the percentage of the lateral force and the overturning moment resisted by the wall panel decreased for the reason of the reduction of its lateral stiffness. After the failure of the wall panel, the steel moment frame shared almost all the lateral force and the overturning moment.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.735-751
• /
• 2014

In the previous paper, authors proposed the unified equivalent frame method (UEFM) for the lateral behavior analysis of the flat plate structure subjected to the combined gravity and lateral loads, in which the rotations of torsional members were distributed to the equivalent column and the equivalent slab according to the relative ratio of gravity and lateral loads. In this paper, the lateral behavior of the multi-span flat plate structures under various levels of combined gravity and lateral loads were analyzed by the proposed UEFM, which were compared with test results as well as those estimated by existing models. In addition, to consider the stiffness degradation of the flat plate system after cracking, the stiffness reduction factors for torsional members were derived from the test results of the interior and exterior slab-column connection specimens, based on which the simplified nonlinear push-over analysis method for flat plate structures was proposed. The simplified nonlinear analysis method provided good agreements with test results and is considered to be very useful for the practical design of the flat plate structures under the combined gravity and lateral loads.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.343-353
• /
• 2021

In this study, in order to improve the seismic performance of existing reinforced concrete (RC) framed structures, various external attachment of corner steel frame configurations was considered as a user-friendly retrofitting method. The external steel frame is designed to contribute to the lateral stiffness and load carrying capacity of the existing RC structure. A six-story building was taken into account. Four different external corner steel frame configurations were suggested in order to strengthen the building. The 3D models of the building with suggested retrofitting steel frames were developed within ABAQUS environment using solid finite elements and analyzed under horizontal loadings nonlinearly. Horizontal top displacement vs loading curves were obtained to determine the overall performance of the building. Contributions of steel and RC frames to the carried loads were computed individually. Load/capacity ratios for the ground floor columns were presented. In the study, 3D rendered images of the building with the suggested retrofits are created to better visualize the real effect of the retrofit on the final appearance of the façade of the building. The analysis results have shown that the proposed external steel frame retrofit configurations increased the lateral load carrying capacity and lateral stiffness and can be used to improve the seismic performance of RC framed buildings.

• 대한조선학회지
• /
• 제14권1호
• /
• pp.11-17
• /
• 1977

In order to design safer and more economical ship structures, theoretical structure analysis of entire vessel is desirable. This paper describes the application of the Direct Stiffness Method to ship structures for calculation of forces and moments which act on each part of ship structures. Before application of this method, ship structures have to be replaced with equivalent space frame. Emphasis is placed on the division of total stiffness matrix of entire vessel. Floating barge, of which principal dimensions are $L{\times}B{\times}D=16M{\times}10M{\times}2M$, is taken as calculation sample. The conclusion of this paper is that, in initial stage of ship structure design, the Direct Stiffness Method by Division can be applied to determine frame-space and scantlings of members.

• 대한토목학회논문집
• /
• 제31권1A호
• /
• pp.9-18
• /
• 2011

구조부재의 연결은 강절(rigid), 활절(hinge) 그리고 부재 간의 상대적인 회전이 허용되는 부분강절(semi-rigid)로 구분될 수 있다. 본 연구에서는 부분강절을 탄성회전스프링으로 가정하여 부재 단부에 적용시킨 평면 뼈대구조에 대하여 전단변형을 고려한 엄밀한 접선강도행렬을 유도하고 이를 다시 탄성강도행렬과 기하학적 강도행렬로 분리?유도함으로써 부분강절을 갖는 평면 뼈대구조물의 안정성해석을 위한 일반화된 해석방법을 제시하고자 한다. 이를 위하여, 보-기둥부재의 좌굴조건을 만족시키는 처짐함수로부터 안정함수(stability function)를 유도하고, 횡변위(sway)를 고려한 힘-변위관계와 적합조건을 고려하여 정확한 접선강도행렬을 제시하였다. 본 연구의 타당성을 입증하고 부분강절 뼈대구조의 전단거동 특성을 파악하기 위하여, 다양한 수치해석 예제에 대해 타 연구자 해석 결과와 본 연구의 안정성 해석결과를 비교하여 제시함으로서 전단변형과 부분강절이 구조물의 좌굴강도에 미치는 영향을 조사한다.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.350-359
• /
• 2017

This paper presents a new holistic development approach for the carbon continuous-fiber composite frame of an automotive sunroof assembly. The original steel frame has been designed to get higher bending stiffness with its corrugated cross-sectional shape. The new approach uses the prepregs of a fast cure epoxy and PCM manufacturing processing. For higher productivity, the new frames feature a very simple plat cross sectional shape but achieve high bending stiffness through the laminate design. The sandwich structure with a PET foam core was presented. The frames were made of carbon UD laminae covered single carbon fabric on the outer surfaces. The fabrics provide torsional stiffness and also hold the carbon UD fibers floating in the low viscous epoxy resin of prepregs at the curing temperature during processing. The final product yields approximately 18 % savings in weight compared with the original.