• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.59-63
• /
• 2005

Compression tests were performed for six types of hat stiffened composite panels with different bonding methods and stiffener section shapes. Six panels showed similar behaviors in buckling and post-buckling region before a skin-stiffener separation failure occurred. The skin-stiffener separation failures occurred in the panels with closed type stiffeners regardless of bonding methods, but not in the panels with open type stiffeners. The separation failures not only reduced the postbuckling strength but also changed buckling mode and postbuckling stiffness. All the separation failures were initiated at the stiffener flange edges closest to skin buckling crests. The co-cured or secondary bonded panels with open type stiffeners had the largest structural performance. Because the post-buckling strength and performance of the composite stiffened panels are reduced by the separation failure, it is important to find bonding methods, stiffener types and manufacturing parameters for preventing of the separation failure.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.37-49
• /
• 1997

The buckling behavior of the web of steel girders are largely dependent on the size and the location of stiffeners and the restraining effect of top and bottom flanges. Elastic and inelastic buckling analyses based or the Spline Finite Strip Method were executed to study the stiffening effect of the longitudinal stiffener on the web of box girders and to find how the top and bottom flanges had effects on the web, where geometric boundary conditions were limited by both hinged, both fixed and the flange sections. The basic assumption for the longitudinal end boundary conditions was that the vertical stiffeners had the rigidity enough to force nil deflection line on the web panel so that the junction line between web and vertical stiffener was assumed to be hinged boundary conditions. The provisions on the longitudinal stiffener of the plate and box girders of the Korean Standard Highway Bridge Specifications(1995) and AASHTO Specifications(1994 LRFD) were compared with the results obtained numerically for the various longitudinal stiffener size of box girders. Simple equations and design curves for the longitudinal stiffener of the web were proposed for the practical use.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1224-1239
• /
• 2008

The earth retaining walls using stabilizing piles can be applied to shallow excavation works without any stiffener. But, It demends a variety of installed composite stiffener on the earth retaining walls when it is installed as deep excavation works. Because, it causes an excessive displacement of walls. This research tried to overcome the problems created by the above issues and intended to apply the composite stiffener. The model test, focused on the effect of installed composite stiffener, measured the bending stress with stabilizing piles and walls, the settlement of earth surface, the displacement of walls for a step excavation and an increase in strip load. With the test results and soil deformation analysis, the reinforcement effect(relating to control displacement and earth presure) was analyzed in a qualitative and quantitative manner. It is expected to overcome a deep excavation works.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.929-935
• /
• 2013

본 논문은 사각 보강 패널에 사용되는 모자형 보강재의 크기 최적화에 대한 결과를 제시하였다. 보강 패널은 1500 ~ 2500 m/s 의 속도를 가지는 발사체와 충돌한다. 모자형 보강재의 크기를 결정하기 위해서 크기 최적화가 수행되었다. 크기 최적화를 수행하기 위해서는 3 개의 함수들로 구성되어 있다. 이 함수들은 목적함수, 제한함수 그리고 설계 함수로 이루어져 있다. 목적 함수는 보강 패널의 1 차 고유 진동수의 최대화가 되도록 하는 것이다. 제함 함수는 보강재의 부피가 사각 패널 부피의 10 % 이내가 되도록 하는 것이며, 설계 변수로는 모자형 보강재의 치수가 된다. 최적화된 모자형 보강재를 이용하한 보강 패널을 사용하여 초고속 충돌에 대한 시뮬레이션을 수행하였으며, 최적화된 보강재에 대해서 속도와 운동 에너지 변화에 대한 결과를 얻었다. 보강 패널의 충돌 저감을 평가하기 위해서 발사체의 운동 에너지와 속도를 무차원화 계산을 수행하여 비교 분석 하였다.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.265-275
• /
• 2005

본 논문의 목적은 내부환보강 X형 관이음부의 거동을 수치적으로 평가하여 환보강재의 보강효과를 규명하고, 강도 산정식을 제안하는 것이다. 축방향력을 받는 관이음부의 정적강도를 산정하기 위해 비선형 유한요소해석을 수행하였다 유한요소해석 결과는 실험결과와 잘 일치하였고, X형 관이음부의 주부재 단부효과를 감소시킬 수 있는 주부재의 적정길이를 제시하였다. 내부 환보강재는 단순 X형 관이음부의 정적강도를 증가시키는데 효율적임이 판명되었고, 최대 보강효과를 나타내는 최대강도비가 1.5에서 3까지 산정되었다. 환보강재의 실용적 크기를 고려한 이음부에 대해 유한요소해석 결과를 이용하여 회귀분석을 실시하고 내부 환보강 X형 관이음부의 강도산정식을 제안하였다.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.267-274
• /
• 2011

본 연구에서는 K형 관이음부의 내부에 단일 및 이중 환보강재를 설치할 경우에 발생하는 보강효과를 수치적으로 평가하였다. 지부재에 축하중을 받는 비보강 이음부와 환보강 이음부의 국부적 최대응력을 평가하기 위해 유한요소해석을 수행하였다. 작용하중과 내부 환보강재의 기하학적 형상이 이음부 거동에 미치는 영향을 평가하고 보강효과를 산정하였다. 또한 단일 환보강재와 이중 환보강재를 비교 평가하여 배치에 따른 응력분포 변화 및 응력의 분산효과를 산정하였다. 수치해석 결과로부터 이음부의 보강설계 자료에 활용 가능한 환보강재의 경제적 규격을 제시하였다.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.811-831
• /
• 2015

This paper focuses on the strengthening methods used for improving the compression behaviors of perforated box-section walls as provided in the anchorage zones of steel pylons. Rectangular plates containing double-row continuous elliptical holes are investigated by employing the boundary condition of simple supporting on four edges in the out-of-plane direction of plate. Two types of strengthening stiffeners, named flat stiffener (FS) and longitudinal stiffener (LS), are considered. Uniaxial compression tests are first conducted for 18 specimens, of which 5 are unstrengthened plates and 13 are strengthened plates. The mechanical behaviors such as stress concentration, out-of-plane deformation, failure pattern, and elasto-plastic ultimate strength are experimentally investigated. Finite element (FE) models are also developed to predict the ultimate strengths of plates with various dimensions. The results of FE analysis are validated by test data. The influences of non-dimensional parameters including plate aspect ratio, hole spacing, hole width, stiffener slenderness ratio, as well as stiffener thickness on the ultimate strengths are illustrated on the basis of numerous parametric studies. Comparison of strengthening efficiency shows that the continuous longitudinal stiffener is the best strengthening method for such perforated plates. The simplified formulas used for estimating the compression strengths of strengthened plates are finally proposed.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.86-95
• /
• 2012

The BWIM(Bridge Weigh-In-Motion) is a technology to identify vehicle properties, such as weight, speed, axle spacing and running lane, passing over a bridge by using dynamic response of bridge member. Such information will be used for assessing durability and establishing a maintenance strategy of roadway structures. In this paper, as a first step for developing BWIM system, analytical and experimental studies were conducted in order to verify whether the response of vertical stiffener in steel girder bridge can be used to identify vehicle properties running on the bridge. It was known from this study that such vehicle information could be estimated reasonably by using strain time history curve of a vertical stiffener due to running vehicles. It is because the effect of each axle-load of vehicle appears definitely in the curve. However, as the magnitude of strain of vertical stiffener is effected by running pattern of vehicles, further study is necessary to reduce error when estimating vehicle weight.

• Steel and Composite Structures
• /
• 제13권4호
• /
• pp.367-382
• /
• 2012

This paper is dedicated to the buckling behaviors of strengthened perforated plates under edge shear loading, which is a typical load pattern of steel plates in civil engineering, especially in plate and box girders. The square plates considered each has a centric circular hole and is simply supported on four edges in the out-of-plane direction. Three types of strengthening stiffeners named ringed stiffener (RS), flat stiffener (FSA and FSB) and strip stiffener (SSA, SSB and SSC) are mainly discussed. The finite element method (FEM) has been employed to analyse the elastic and elasto-plastic buckling behavior of unstrengthened and strengthened perforated plates. Results show that most of the strengthened perforated plates behave higher buckling strengths than the unstrengthened ones, while the enhancements in elastic buckling stress and elasto-plastic ultimate strength are closely related to stiffener types as well as plate geometric parameters including plate slenderness ratio and hole diameter to plate width ratio. The critical slenderness ratios of shear loaded strengthened perforated plates, which determine the practical buckling pattern (i.e., elastic or elasto-plastic buckling) of the plates, are also studied. Based on the contrastive analyses of strengthening efficiency considering the influence of stiffener consumption, the most efficient cutout-strengthening methods for shear loaded perforated square plates with different slenderness ratios and circular hole diameter to plate width ratios are preliminarily identified.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.1-7
• /
• 2015

In this paper, we present the result of analytical investigation pertaining to the structural behavior of steel-concrete composite plate girder with arch-type web stiffener. In the arch-type web stiffener located in the compression side of web, infill concrete is cast to strengthen the arch-type stiffener and also to exert resisting force against compression force. This type of composite steel-concrete plate girder bridge is built and is in service. To understand the behavior thoroughly, analytical parametric study was conducted by using the finite element method. As a result it was found that the effect of arch-type stiffener with infill concrete is considerable for the design of such type composite girder bridge.