• 한국해양공학회지
• /
• 제31권4호
• /
• pp.281-287
• /
• 2017

In the case of fixed offshore wind turbines, scouring phenomena have been reported around sub-structures as a result of currents, which seriously damage the structural stability. A parametric study of the various sub-structures of a fixed offshore wind turbine was performed to investigate their effects on the scouring phenomena. For a suction bucket foundation and monopile, the effects of the stick-up heights and water depth were studied, respectively. The open source libraries, called OpenFOAM, were used to simulate a violent flow around a foundation. The numerical methods were selected based on a two-dimensional analysis of a suction bucket. Based on the results for various stick-up heights, a larger scouring region was observed with an increase in the stick-up height because of the down-wash flow around a foundation. Based on the results for various monopile water depths, the water depth had an insignificant effect on the scouring.

• 한국자동차공학회논문집
• /
• 제3권4호
• /
• pp.19-29
• /
• 1995

This paper discusses the stick-slip phenomenon of the driveline system of a vehicle in consideration of friction. Friction is operated on the between of flywheel and clutch disk. The expressions for obtaining the results have been derived from the equation of motion of a three degree of freedom frictional torsion vibration system which is made up driving part(engine, flywheel), driven part(clutch, transmission) and dynamic load part(vehicle body) by applying forth-order Rungekutta method. It was found that the great affect parameters of the stick-slip or stick motion were surface pressure force between flywheel and clutch disk, time decay parameter of surface pressure force and 1st torsional spring constant of clutch disk when driveline system had been affected by friction force. The results of this study can be used as basic design data of the clutch system for the ride quality improvement of a car.

• 대한임상검사과학회지
• /
• 제46권1호
• /
• pp.12-16
• /
• 2014

Tetanus has high lethality and can cause serious complication, so it is very important to have a quick and exact checkup and treatment. In this study, we conducted a study about clinical characteristics and types of tetanus patients in Daegu Emergency Medical Center and we studied possibility of Tetanos Quick Stick (TQS) as a selective check up to treat tentanus by comparing the results of local checkup kit measured from tetanus quick stick developed to check up tetanus antibody titer and results measured from ELISA (Enzyme-Linked Immunosorbent Assay). The result of the study showed that tetanus happens more to males, and by looking at season, tetanus happened most in summer (from June-August) as 19 cases (45.3%), and when patients come to the emergency medical center, the diagnosis name was electrolyte imbalance 14 cases (33.3%), peripheral nerve 11 cases (26.2%), Meningitis 8 cases (19.0%), drug addiction 7 cases (16.7%), and the patients who are diagnosed as tetanus at the beginning of hospitalization was 2 cases (4.8%). The result of TQS usefulness by comparing with ELISA, in TQS, 42 people was positive and 478 people was negative. it was positive when the result was over 0.1 IU/mL, 48 people was ELISA positive while 472 people was negative. TQS checkup has accuracy of 98%, sensitivity of 83.3%, specificity of 99.5%, positive predictability of 95.2% and negative predictability of 98.3%. The evaluation of current immunity statuses of tetanus patients is available for TQS checkup, and it has an advantage of preventing side effects coming from the injection of unnecessary vaccine and immunoglobulin, and it is thought that it can give help to emergency checkup and treatment at the beginning.

• 한국초등과학교육학회지:초등과학교육
• /
• 제39권2호
• /
• pp.268-283
• /
• 2020

In this study, we aimed to look at what dilemmas of science teaching elementary school teachers experience and how they cope with their dilemmas in everyday science classes. Three elementary school teachers participated and qualitative data such as class log, class video, and interview materials were analyzed in inductive ways. The main findings are as follows. First, the dilemmas were classified based on the four factors that make up the science class; teacher, student, learning content, environment. However the dilemmas appeared to be not only one factor involved, but the rest of the factors intertwined. Thus, it was interpreted how the main factors causing the dilemmas conflicted with other factors. Second, the types of teachers' coping strategies to the dilemmas could be largely divided into 'give-up', 'stick to' and 'modified'. In some cases, teachers gave up on what they valued and did not take active action ('give-up'), teachers chose what they valued and made decisions to actively realize it ('stick to'), and in others, conflicts were adjusted by introducing new methods or elements to their classes ('modified'). Based on these results, we discussed that the teacher's dilemmas could facilitate the teacher's learning or professional development.

• 한국운동역학회지
• /
• 제29권2호
• /
• pp.43-51
• /
• 2019

Objective: This study aims to propose an efficient technical model through a kinematic analysis of field hockey drag flick shooting motion in laboratory situations and game situations and to build up the basic data on drag flick shooting technique through a comparative analysis of a Korean specialized shooter and specialized shooters of competing Asian countries. Method: This study selected one Korean female national specialized shooter and seven specialized shooters of competing countries, China, Japan, India, and Malaysia, who participated in the 2018 Asian Hockey Champions Trophy as research subjects. In exercise situations, a 3-D motion analysis utilizing an infrared camera was conducted, while in game situations, an image-based 3-D motion analysis utilizing a digital camera was conducted. Results: The Korean specialized shooter had smaller changes in the angles of the trunk and the stick in game situations than in exercise situations. She had a high angular velocity of the trunk and the stick head, and the maximum speed of the ball was high. The Korean specialized shooter had the maximum angular velocity of the trunk higher than the specialized shooters of the competing countries did, and the angular velocity of the stick head and the maximum speed of the ball were in the average level. Conclusion: As for drag flick shooting in game situations, changes in the angle of the trunk and the stick were small, and the angular velocity was high due to the pressure that the shooters should perform the motion fast with the defenders' interruptions, and this high angular velocity of the trunk and the stick head affected the movement of the ball. Thus, the maximum speed of the ball was higher in game situations than in exercise situations. The Korean specialized shooter had the maximum angular velocity higher than the specialized shooters of the competing countries did; however, the maximum speed of the ball was average, and it turned out that the maximum speed of the ball was associated with the angular velocity of the stick head in P3. Therefore, Korean specialized shooters need complementary training for a change to the torque of the stick head, using the strong torque of the trunk.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1686-1691
• /
• 2010

In this paper, we aim at providing a novel sweeping method for multi-security mobile robots. The sweeping problem of the multi-robots can be modeled as the stick pulling problem in which the swarm robots should sweep unknown terrains in order to remove sticks collaboratively. For the purpose, we define a certain map, what is called stick map. And we suggest how to make swarm robots build up and utilize the map in order to improve the productivity of collaborative removing sticks. Finally, the efficiency of our algorithm is verified with simulation experiments.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.109-115
• /
• 1999

This paper presents a stabilization control designed to improve position stabilization performance of a position servo-system(turret) mounted on a manuvering platform(vehicle). In the consideration of the motion of the platform, a dynamic model of the stabilization system is derived and shows the viscous and stick-slip friction torques are the major source of stabilization errors. An extended generalized minimum variance control which consists of a feedforward disturbance compensation as well as a pole placement feedback control is suggested to reduce the stabilization errors caused from the friction disturbances. This modeling and control are applied to a small experimental set-up and the experimental results confirm the accuracy of the model and the effectiveness of the suggested control.

• 폴리머
• /
• 제37권5호
• /
• pp.642-648
• /
• 2013

이상소음은 고분자 판재가 상호간에 미끄럼 운동을 할 때 마찰에 의한 스틱-슬립 메카니즘에 의하여 발생한다. 본 연구에서는 실험적 방법을 통하여 이상소음을 줄이기 위하여 가전제품에 많이 사용되는 ABS, PP, MIPS, POM 고분자 소재에 대하여 ABS를 기초로 하여 소재간의 조합이 이상소음에 미치는 영향을 알아보았다. 소재간 마찰에 의한 이상소음을 평가하기 위한 실험방법과 장치를 제안하였으며, 실험변수로는 소재의 조합뿐만 아니라 고분자 판재의 표면 거칠기, 수직 접촉하중, 상대운동 속도 등을 두었다. 본 연구를 통하여 이상소음 저감을 위해서 ABS 소재와 POM 소재 조합이 가장 좋음을 알 수 있었으며, 다른 재료조합에 대한 결과도 상호 비교하였다.