• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.16-16
• /
• 2017

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.69-74
• /
• 2016

A new wave-piercing-type high-speed planing boat without a chine was developed, and its basic performance was investigated in a model test, including the resistance, trim, and sinkage. The maximum speed of the developed ship was 35 knots. The hull form was developed by combining a VSV (very slender vessel) and TH (transonic hull), which have large deadrise angles at the bow. The main dimensions were estimated by a statistical approach using actual ship data. The effect of a side fin attached at the stern near the water line was investigated from a resistance point of view. It was found that the developed hull form showed the possibility of a new concept for a high-speed planing hull without a chine, and the side fin played an important role in increasing the resistance performance by controlling the trim and sinkage in the high-speed range.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.78-84
• /
• 2013

The primary objective of the current work is to develop efficient numerical code to assess the resistance performance of the twin hull form. Resistance performance for the two different twin hull forms with asymmetric and symmetric mono hull using developed code are evaluated. Numerical calculations and model tests have been compared to validate a developed code used in the current work. Comparison were carried out through sinkages of the bow and stern, trim angle and wave-making resistance. Comparative analysis regarding hydrodynamic characteristic of different twin hull forms is worthy of application in the hull form development stage.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.109-123
• /
• 2008

The present paper presents the CFD result for a beam wave test case. An ONR tumblehome ship model with bilge keels is used. The beam wave test is for zero forward speed and roll and heave 2DOF with wave slope $a_k=0.156$ and wavelength ${\lambda}=1.12L_{PP}$, with $L_{PP}$ the ship length. The problems is solved numerically with an unsteady Reynolds averaged Navier-Stokes approach. The free surface flow is computed using a single-phase level-set method and the motions in each time step are integrated using a predictor-corrector iteration approach which uses dynamic overset grids moving with relative ship motion. The predicted CFD results for motions and forces are compared with experimental data, showing a reasonable agreement.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.2
• /
• pp.199-212
• /
• 2000

It is very important to investigate the hull response of a fishing vessel in the sea to ensure the safe navigation and fishing operation in rough sea by preserving excellent sea keeping qualities. For this purpose, the author measured various responses of three stem trawlers in waves using real sea experimental measuring system. The author analyzed the experimental data using the statistical and spectral analyzing method to get the characteristics of the motion responses of the vessels according to the wave height and the ship's speed. The results obtained can be summarized as follows ; (1) Rather higher response of the pitch motion due to the wave height appeared in the head sea and the bow sea than any other wave direction without relevance to ship's size. In case of the roll motion, the beam sea and the quartering sea have a high response value. The period of peak of the pitch motion and the roll motion according to the wave height in each vessel has almost same value respectively. (2) The change of response of the pitch motions deeply depend on the ship's speed in the head sea and the bow sea, but not in the other wave direction. (3) The change of response of the roll motions in the beam sea, the quartering sea and the following sea are affected by the influence of the ship's speed in 5k't to 8k't, but not related to the ship's speed in out of that range.

• Ocean Systems Engineering
• /
• v.3 no.1
• /
• pp.35-53
• /
• 2013

In this study, a hybrid floating structure with cylinder was introduced to reduce the hydrodynamic motions of the pontoon type. The hybrid floating structure is composed of cylinders and semi-opened side sections to penetrate the wave impact energy. In order to exactly investigate the hydrodynamic motions and structural behavior of the hybrid floating structure under the wave loadings, integrated analysis of hydrodynamic and structural behavior were carried out on the hybrid floating structure. Firstly, the hydrodynamic analyses were performed on the hybrid and pontoon models. Then, the wave-induced hydrodynamic pressures resulting from hydrodynamic analysis were directly mapped to the structural analysis model. And, finally, the structural analyses were carried out on the hybrid and pontoon models. As a result of this study, it was learned that the hybrid model of this study was showed to have more favorable hydrodynamic motions than the pontoon model. The surge motion was indicated even smaller motion at all over wave periods from 4.0 to 10.0 sec, and the heave and pitch motions indicated smaller motions beyond its wave period of 6.5 sec. However, the hybrid model was shown more unfavorable structural behavior than the pontoon model. High concentrated stress occurred at the bottom slab of the bow and stern part where the cylinder wall was connected to the bottom slab. Also, the hybrid model behaved with the elastic body motion due to weak stiffness of floating body and caused a large stress variation at the pure slab section between the cylinder walls. Hence, in order to overcome these problems, some alternatives which could be easily obtained from the simple modification of structural details were proposed.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.1-7
• /
• 1998

Hull form development of the medium size high speed fishery patrol ship was carried out in the CWC at Chosun university. Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number : CU-015), and modified fore and after body hull form under the slightly lengthened lo be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb and sharp entrance angle were adapted. Meanwhile, to enlarge the engine room space keeping high resistance and sea-keeping Performance, U-type stern hull form was developed. Although the hull form was highly constrained in being limited to modification of a parent hull form significant wave resistance improvement was made.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.93-101
• /
• 2015

This paper provides numerical results of the simulation for the flow around the hull and the propeller of KCS model ship advancing in shallow water conditions. A finite volume method is used to solve the unsteady Reynolds averaged Navier-Stokes(RANS) equations, where the wave-making problem is solved by using a volume-of-fluid(VOF) method. The wave formed near the hull surface in shallow water conditions shows a deep trough dominant pattern that causes the loss of buoyancy followed by hull squat. The flow past the hull increases as the depth of water decreases. However, the axial flow velocity around the stern shows a reduction in magnitude by the effect of shallow water accompanied by the hull-propeller interaction. As a results, the thrust and torque coefficient increase about 8.3% and 6.2%, respectively for a depth of h/T=3.0 corresponding to a depth Froude number of $F_h=0.693$. The resistance coefficient increases about 11.6% at this Froude number condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.41-49
• /
• 1997

Computational results from Navier-Stokes equations are presented for the Stokes-wave/flat-plate boundary-layer and wake for small wave steepness(Ak=0.01), including exact and approximate treatments of the viscous free-surface boundary conditions. The macro-scale flow indicate that the variations of the external-flow pressure gradients cause acceleration or deceleration of the streamwise velocity component and alternating direction of the cross flow. Remarkably, the wake displays a greater response, i.e., a bias with regard to favorable as compared to adverse pressure gradients. The micro-scale flow indicates that the free-surface boundary conditions have a profound influence over the boundary layer and near/intermediate wake. Order-of-magnitude estimates are conformed to the computational results. And appreciable errors are introduced through approximations to the free-surface boundary conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.456-464
• /
• 2016

To design the modified hull form with relatively unfavorable dimensions and constraints than the parent ship the stepwise design was applied. In each design step the resistance characteristics was estimated by numerical calculations using CFD programs as Wavis 1.4, Wavis 2.1 and Fluent 12.1. The wave profiles along hull surface by potential flow calculations were investigated to improve wave resistance by modifying the bow shapes. To improve the stern shapes with a point of viscous form resistance the pressure distributions on hull surface and the limiting streamlines are investigated by viscous flow calculations. The design objectives such as shortening the LBP, enlarging the propeller tip clearance, moving forward of the LCB location and increasing the displacement were applied by stepwise to develop the new hull form of DWT 75,000 product oil carrier. Finally a new hull form was developed without the resistance performance loss compared with the parent ship.