• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.109-114
• /
• 2003

Depth error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with various experimental results.

• 한국정보통신학회논문지
• /
• 제19권9호
• /
• pp.2138-2144
• /
• 2015

멀티모달 다중 카메라 시스템은 동일 기종이 아닌 적외선 열화상 카메라와 광학 카메라를 이용하여 구성한 스테레오 형태의 시스템이다. 본 논문에서는 열화상 카메라와 광학카메라에서 동시에 인식이 가능한 전용 타겟을 제작하여 스테레오 보정을 진행하였다. 일반적인 스테레오 교정에서는 두 카메라 사이의 내부 파라미터와 외부 파라미터를 이용하여 교정을 진행 하지만, 본 연구에서는 각각의 영상에서 코너점을 검출하고, 검출된 코너점의 좌표를 이용하여 두 영상 사이의 픽셀 오차율, 영상의 회전정도 및 영상의 크기 차이를 구한다. 이를 이용하여 기하학적 변환중 하나인 어파인 변환을 이용하여 보정을 진행 하였으며, 최종적으로 보정된 영상에 매핑되는 영역을 재구성하여 최종 결과 영상을 구했다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.129-134
• /
• 2003

Mobile Mapping System needs system calibration of multi sensors. System calibration is defined as determination of spatial and rotational offsets between the sensors. Especially, EO parameters of GPS/INS require knowledge of the calibration to camera frame. The calibration parameters must be determined with the highest achievable accuracy in order to get 3D coordinate points in stereo CCD images. This study applies Boresight calibration for the calibration between GPS/INS and camera, and estimates the Performance of the calibration.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1411-1422
• /
• 2003

The detection of free spaces between obstacles in a scene is a prerequisite for navigation of a mobile robot. Especially for stereo vision-based navigation, the problem of correspondence between two images is well known to be of crucial importance. This paper describes multi-range approach of area-based stereo matching for grid mapping and visual navigation in uncertain environment. Camera calibration parameters are optimized by evolutionary algorithm for successful stereo matching. To obtain reliable disparity information from both images, stereo images are to be decomposed into three pairs of images with different resolution based on measurement of disparities. The advantage of multi-range approach is that we can get more reliable disparity in each defined range because disparities from high resolution image are used for farther object a while disparities from low resolution images are used for close objects. The reliable disparity map is combined through post-processing for rejecting incorrect disparity information from each disparity map. The real distance from a disparity image is converted into an occupancy grid representation of a mobile robot. We have investigated the possibility of multi-range approach for the detection of obstacles and visual mapping through various experiments.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.487-493
• /
• 1998

Camera calibration is the process of determining the coordinate relationship between a camera image and its real world space. Accurate calibration of a camera is necessary for the applications that involve quantitative measurement of camera images. However, if the camera plane is parallel or near parallel to the calibration board on which 2 dimensional objects are defined(this is called "ill-conditioned"), existing solution procedures are not well applied. In this paper, we propose a neural network-based approach to camera calibration for 2D images formed by a mono-camera or a pair of cameras. Multi-layer perceptrons are developed to transform the coordinates of each image point to the world coordinates. The validity of the approach is tested with data points which cover the whole 2D space concerned. Experimental results for both mono-camera and stereo-camera cases indicate that the proposed approach is comparable to Tsai's method［8］. Especially for the stereo camera case, the approach works better than the Tsai's method as the angle between the camera optical axis and the Z-axis increases. Therefore, we believe the approach could be an alternative solution procedure for the ill -conditioned camera calibration.libration.

• 방송공학회논문지
• /
• 제24권6호
• /
• pp.965-973
• /
• 2019

본 논문에서는 Stereo 4K@60fps 360 VR 실시간 영상 획득 시스템을 영상 스트림 획득과 영상 인코딩(encoding), 영상 스티칭(stitching) 모듈로 나누어 설계하였다. 시스템은 6대의 카메라로부터 HDMI Interface를 통해 획득된 6개의 2K@60fps의 영상 스트림을 스티칭을 통하여 실시간으로 Stereo 4K@60fps 360 VR 영상을 획득한다. 영상 획득 단계에서는 멀티 스레드(Multi-Thread)를 이용하여 각 카메라로부터 실시간으로 영상 스트림을 획득하였다. 영상 인코딩 단계에서는 영상 획득과 영상 스티칭 모듈 간의 전송 리소스를 줄이기 위하여 멀티 스레드를 이용한 Raw Frame 메모리 전송과 병렬 인코딩을 하였다. 영상 스티칭 단계에서는 스티칭 Calibration 전처리작업을 통하여 스티칭 실시간성을 확보하였다.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.32-38
• /
• 2007

In this study, a new algorithm for measuring the velocity and distance from a camera to a moving object by using pseudo-stereo images obtained from a single camera with a stereo adapter is proposed. The proposed system is similar to a parallel visual stereo system using a two-camera system, but because this system can obtain pseudo-stereo images form a single camera, it has advantages not only in the aspect of cost but also in stereo conformity by arrangement and the calibration of the left and right stereo cameras upon image processing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.357-358
• /
• 2006

Accurate calibration matching for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of Intra parameter is calibrated with known points, such error can be compensated in some amount and showed the variable experiments for accurate effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.603-605
• /
• 2005

In this paper, we deal with a calibration method for low cost motion capture sensor using PSD (Position Sensitive Detection). The PSD sensor is employed to measure the direction of incident light from moving markers attached to motion body. To calibrate the PSD optical module, a conventional camera calibration algorithm introduced by Tsai. The 3-dimensional positions of the markers are measured by using stereo camera geometry. From the experimental results, the low cost motion capture sensor can be used in a real time system.

• 로봇학회논문지
• /
• 제4권4호
• /
• pp.298-304
• /
• 2009

This paper describes an algorithm that improves 3D reconstruction result using a multi-sensor fusion disparity map. We can project LRF (Laser Range Finder) 3D points onto image pixel coordinatesusing extrinsic calibration matrixes of a camera-LRF (${\Phi}$, ${\Delta}$) and a camera calibration matrix (K). The LRF disparity map can be generated by interpolating projected LRF points. In the stereo reconstruction, we can compensate invalid points caused by repeated pattern and textureless region using the LRF disparity map. The result disparity map of compensation process is the multi-sensor fusion disparity map. We can refine the multi-sensor 3D reconstruction based on stereo vision and LRF using the multi-sensor fusion disparity map. The refinement algorithm of multi-sensor based 3D reconstruction is specified in four subsections dealing with virtual LRF stereo image generation, LRF disparity map generation, multi-sensor fusion disparity map generation, and 3D reconstruction process. It has been tested by synchronized stereo image pair and LRF 3D scan data.