• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.525-534
• /
• 1999

The present paper proposes a generalized modal analysis procedure for non-uniform, distributed-parameter rotor-bearing systems. An exact element matrix is derived for a Timoshenko shaft model which contains rotary inertia, shear deformation, gyroscopic effect and internal damping. Complex coordinates system is adopted for the convenience in formulation. A generalized orthogonality condition is provided to make the modal decomposition possible. The generalized modal analysis by using a modal decomposition delivers exact and closed form solutions both for frequency and time responses. Two numerical examples are presented for illustrating the proposed method. The numerical study proves that the proposed method is very efficient and useful for the analysis of distributed-parameter rotor-bearing systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.797-801
• /
• 2003

The mechanical properties such as shear strength and the hardness of milli-size products that manufactured for various process parameters by forward extrusion using square dies are investigated. Shear strength test is implemented for the observation of relation between vickers hardness and shear strength in the interface of head and shaft part of a stepped pin. When the extrusion ratios of pure aluminum and pure copper billets increase, the hardness on both the surface and the center line of a pin also increase, especially the hardness on the surface is shown to be a little higher than on the center. The existence of knock-out pad in extrusion die caused hardness increase in the interface of a extruded pin. As compared shear strength with hardness of a pin, the approximated linear relations are suggested in this study.

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.183-195
• /
• 1995

The mathematical model of the gear reductioner which consists which consists of the geared rotor-bearing system containing case is developed, assuming as the lumped parameter system. Constraints for vibration suppresion as well as strength of gear teeth, and shaft and kinematic conditions in gear pairs are considered. To find the design parameters satisfing the proposed constraints, a direct search method modified by the technique of Taguchi's experimental scheduling is used. One and two stepped gear reductioners are designed so that the criticl speeds due to the gear transmission error are moved out of the operating speed range.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.213-220
• /
• 2003

By the localization of electro-chemical dissolution region, we succeeded in a few micrometer size hole drilling on stainless steel with the radial machining gap of about 1 ${\mu}{\textrm}{m}$. Tens of nanosecond duration voltage pulses were applied between WC micro-shaft and stainless steel in the 0.1 M $H_2SO_4$ solution. Pt balance electrode was used to drill the high aspect ratio micro-hole without generation of Cr oxide layer on the machined surface. The effects of applied voltage, pulse duration, and pulse period on localization distance were investigated according to machining time. We suggested the taper reduction technique especially brought up on blind-hole machining. High quality micro-holes with 8 ${\mu}m$ diameter with 20 ${\mu}m$ depth and 12 ${\mu}m$ diameter with 100 ${\mu}m$ depth were drilled on 304 stainless steel foil. The various hole shapes were also produced including stepped holes and taper free holes.

• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.82-88
• /
• 2009

This study was conducted to detect faults in a gearbox comprised of gears, bearings and shafts. The envelope analysis was used as a method of detection, which could detect breakage and pitting of gears and bearings, and misalignment of shafts effectively. Vibration measured at the increaser was analyzed to characterize the faults. When the increaser has a defect, peaks with a constant period appear in the time history of vibration and its harmonic components also in the envelope spectrum. The envelope analysis showed that a crack in the stepped output shaft caused the increaser to generate the abnormal peaks.