• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.267-275
• /
• 2000

In an effort to assess the reliability of satellite altimeter system, we conducted a comparative analysis of sea level data that were collected using the TOPEX/POSEIDON (T/P) altimeter and the 10 tide gauge (TG) stations in the satellite passing track. The analysis was made using data sets collected from marginal sea regions surrounding the Korean Peninsula at T/P cycles of 2 to 230, which correspond to October 1992 to December 1998. Because of strong tidal activity in the study area, treatment of tidal errors is a very critical step in data processing. Hence in the computation of dynamic heights from the Tn data, we adapted the procedures of Park and Gamberoni (1995) to reduce errors associated with it. When these T/P data were treated, the alias periods of M$_2$, S$_2$, and K$_1$ constitutions were found at 62.1, 58.7, and 173 days. The compatibility of the T/P and TG data sets were examined at various filtering periods. The results indicate that the low-frequency signal of Tn data can be interpreted more safely with longer filtering periods (such as up to the maximum selected values of 200 days). When RMS errors for 200-day low-pass filter period was compared among the whole 10 tidal stations, the values spanned in the range of 2.8 to 6.7 cm. The results of correlation analysis at this filtering period also showed a strong agreement between the Tn and TG data sets over the whole stations investigated (e.g., P values consistently less than 0.0001). According to our analysis, we conclude that the analysis of surface sea level using satellite altimeter data can be made safely and reasonably long filtering periods such as 200 days.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.649-658
• /
• 2020

The purpose of this study is to verify the difference in health and obesity according to water and coffee intake. The study subject is 900 female college students. Physical fitness factors measured in this study were physical strength(grip strength, back muscle strength), muscle endurance (sit-up), Flexibility(Sit & reach) and cardiopulmonary endurance(harvard step). The factors of body composition (intracellular fluid, extracellular fluid, protein, mineral, body water content, muscle mass, lean body mass, body fat mass) and obesity (BMI, body fat percentage, abdominal fat percentage, obesity) were measured with the Inbody equipment. SPSS program was used for all data analysis. Group differences were verified by two-way ANOVA and one-way ANOVA. The results are as follows. There was no interaction effect between water and coffee intake on health and obesity. Therefore, the difference of the dependent variables according to each independent variable was verified. There was no significant difference in physical fitness according to water intake and coffee intake, but there was a significant difference in body composition (intracellular fluid, protein, minerals, body water, muscle mass and lean body mass). Water drinking group more than 7 cups had significantly higher body composition than the 1-4 cups water drinking group. In the case of coffee, the body composition of the 3 cup intake group was significantly higher than that of the none intake group. Obesity was significantly higher than the none intake and 1-2 cup intake groups. Based on the study results, water intake was not related to obesity, but coffee was related. For further studies, it would be better to consider gender and age differences in drinking various beverages such as water and coffee and that would be used to suggest a desirable way of water intake according to individual characteristics of the better health.

• Strategy21
• /
• s.30
• /
• pp.99-142
• /
• 2012

Withe increased North Korea's security threats, the South Korean navy has been faced with deteriorating security environment. While North Korea has increased asymmetric forces in the maritime and underwater with the development of nuclear weapons, and China and Japan have made a large investment in the buildup of naval forces, the power of the Pacific fleet of the US, a key ally is expected to be weakened. The biggest threat comes from China's intervention in case of full-scale war with North Korea, but low-density conflict issues are also serious problems. North Korea has violated the Armistice Agreement 2,660 times since the end of Korean War, among which the number of marine provocations reaches 1,430 times, and the tension over the NLL issue has been intensifying. With tension mounting between Korea and Japan over the Dokdo issue and conflict escalating with China over Ieo do Islet, the US Navy has confronted situation where it cannot fully concentrate on the security of the Korean peninsula, which leads to need for strengthening of South Korea's naval forces. Let's look at naval forces of neighboring countries. North Korea is threatening South Korean navy with its increased asymmetric forces, including submarines. China has achieved the remarkable development of naval forces since the promotion of 3-step plan to strengthen naval power from 1989, and it now retains highly modernized naval forces. Japan makes an investment in the construction of stat of the art warship every year. Since Japan's warship boasts of its advanced performance, Japan's Maritime Self Defense Force is evaluated the second most powerful behind the US Navy on the assumption that submarine power is not included in the naval forces. In this situation, naval power construction of South Korean navy should be done in phases, focusing on the followings; First, military strength to repel the energy warship quickly without any damage in case of battle with North Korea needs to be secured. Second, it is necessary to develop abilities to discourage the use of nuclear weapons of North Korea and attack its nuclear facilities in case of emergency. Third, construction of military power to suppress armed provocations from China and Japan is required. Based on the above naval power construction methods, the direction of power construction is suggested as follows. The sea fleet needs to build up its war potential to defeat the naval forces of North Korea quickly and participate in anti-submarine operations in response to North Korea's provocations. The task fleet should be composed of 3 task flotilla and retain the power to support the sea fleet and suppress the occurrence of maritime disputes with neighboring countries. In addition, it is necessary to expand submarine power, a high value power asset in preparation for establishment of submarine headquarters in 2015, develop anti-submarine helicopter and load SLAM-ER missile onto P-3C patrol aircraft. In case of maine corps, division class military force should be able to conduct landing operations. It takes more than 10 years to construct a new warship. Accordingly, it is necessary to establish plans for naval power construction carefully in consideration of reality and future. For the naval forces to safeguard maritime sovereignty and contribute to national security, the acquisition of a huge budget and buildup of military power is required. In this regard, enhancement of naval power can be achieved only through national, political and military understanding and agreement. It is necessary to let the nation know that modern naval forces with improved weapon system can serve as comprehensive armed forces to secure the command of the sea, perform defense of territory and territorial sky and attack the enemy's strategic facilities and budget inputted in the naval forces is the essential source for early end of the war and minimization of damage to the people. If the naval power construction is not realized, we can be faced with a national disgrace of usurpation of national sovereignty of 100 years ago. Accordingly, the strengthening of naval forces must be realized.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.201-220
• /
• 1999

We got these results after studying about modification of Gejitang(桂枝湯) that showed on sympton and prescription about Soumin(少陰人). 1. There are totally eleven prescriptions related to Gejitang appeared on Dongyi-Soose-Bowon(東醫壽世保元). Among them, one is prescription of Danguisayoktang(當歸四逆湯) in prescription of Discussion of Cold Induced Disorder(傷寒論) and another is Gejibujatang(桂枝附子湯) in Won-Myung dynasty period(元明時代). There are nine prescriptions in LeeJae-Ma(李濟馬)'s pre-scription and we can see there are many prescriptions used prescriptions related to Gejitang for Mang Yang(亡陽). 2. Pre-scriptions related to Gejitang has seven prescriptions in Extra-disease(表病證), and two prescriptions in Intra-disease(裏病證) which are analyzed as modified prescription from Gejitang. 3. Although 藿香正氣散, 香蘇散, 芎歸香蘇散, 八物君子湯 etc. are not modified prescriptions of Gejitang, We can see that its are brought up to be on the same with alternative remedy of Gejitang in each step of symptoms. 4. Symptoms are exactly classified in Soumin, the prescription which is used in different symptoms of diseases is similar in raw materials. It's because the remedy of Acending and Descending(升降) is used under the same purpose that maintain Yangnan Qi(陽暖之氣). 5. We could realize that Panax gienseng(人蔘), Cinnamomum Cassia(肉桂) and Aconitum Carrnichali(附子) are commonly important to reinforce Yangnan Qi because the more disease got worse, the more patient lost Yangnan Qi on both Extra-disease and Intra-disease in the Soumin's disease.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2010

This study reviews the influence of culture in interpersonal servicescapes by examining the restaurant retail setting. Two cultures (Canada and France) are surveyed in order to better understand their retail expectations towards interpersonal servicescapes. Using Hofstede's (1991) cultural dimensions to explain some of the differences between Canadian and French restaurant patrons, this study demonstrates a potentially interesting research avenue in the field of cross-cultural interpersonal services marketing. It demonstrates that cultural dimensions do not operate independently but interdependently. Understanding this can help retailers better explain complex service interactions between countries that may appear similar in terms of various socio-demographic features. In this exploratory research, a measure via exploratory factor analysis was developed, one that encompasses both the physical and service aspects common to interpersonal servicescape by using personality traits. This measure was tested in order to better understand the service expectations between two cultures, Canada and France. Five dimensional structures were uncovered in both cultures but with different traits and groupings. The differences between the traits uncovered and the overall Canadian and French personality structures find some explanation using Hofstede's (1991) cultural dimensions. The results of this survey point to a possible explanation as to why when services are transferred between cultures, the perceptions of them can be different and sometimes even lead to service failure. There are clearly some cultural differences between the Canadian and French consumers and their overall expectations regarding their consumption experience. Reviewing the first factor of the French and Canadian personality structures shows that the individualist/collectivist differences are apparent between the Canadian and the French cultures. The second dimension also has quite a few traits in common, five, all of which have the personal treatment aspect of the restaurant experience that a service provider would be responsible for: polite, respectful, and dedicated. Notable is that the French dimension does not include the authenticity or the hospitable aspect of the experience but includes even more features that are inherent to the personal interaction, such as charming and courteous. The third dimension of the Canadian and French structures reflects completely different expectations. Whereas the French dimension centers around energy and enthusiasm, the Canadian version is more laid-back and relaxed. There is extroversion in the French dimension to introversion in the Canadian dimension. This could be explained by differences on the Uncertainty Avoidance dimension as outlined by Hofstede (1991). The fourth dimension seems to confirm previously outlined cultural differences. Whereas Canadians, being a bit lower on uncertainty avoidance and power distance, prefer an intimate and private experience, the French continue to expect extraversion and inclusive features to their experience. The fifth dimension is in the French personality structure a clear expression of the high power distance society, where the roles of the players in the restaurant experience are clearly defined and the rules of engagement preserved. This study demonstrates that different cultures clearly do relate to different expectations regarding interpersonal services. This is apparent in the dimensions that come up in both the French and the Canadian personality structures, not only in terms of how different they are but also in with which cultural dimensions these can be explained. For interpersonal servicescapes, the use of personality traits is interesting as it allows for both physical and service features to be accounted for. Furthermore, the social component inherent to interpersonal servicescapes surfaces in most of the dimensions of the service personality structures. The quality of social exchanges is extremely important, and this even more so in cross-cultural situations, where the expec tations regarding the service experience may vary. As demonstrated by this research and using Hofstede's (1991) paradigm, not all societies will have the same expectations pertaining to the interpersonal services. Furthermore, the traditions surrounding the type of service can also have an impact on the service evaluations and differ between countries and cultures. However, using personality traits may also allow for retailers to see which service traits are common to two or more cultures where they seek to be present, and focus on these in the offering. The findings demonstrate the importance of the individualist and collectivist dimension for interpersonal servicescapes. This difference between the French and the Canadian personality structure is apparent in the most dominant dimension as well as within others. The findings are a step in explaining how retailers can transfer and then measure interpersonal services across cultures.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.155-166
• /
• 2010

Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

• Journal of Korean Academy of Nursing
• /
• v.20 no.3
• /
• pp.430-458
• /
• 1990

Care is a central concept of nursing. Nursing would not exist without caring. Care and quality of life are closely related. Human behavior is a manifestation of culture. We can say that caring and nursing care are expression of culture. The nurse must understand the relationship of culture with care for ensure quality nursing care. But knowledge of cultural factors in nursing is not well developed. Time and in - depth study are needed to find meaningful relationships between culture and care. Nurses recognized the importance of culturally appropriate nursing There are two care systems in culturally based nursing. The folk care system and the professional nursing care system. The folk care system existed long before the professional nursing care system was introduced into this culture. If the discrepancy between these two care systems is great, the client may receive inappropriate nursing care. Culture and subcaltures are diverse and dynamic in nature. Nurses need to know the caring behaviors, patterns, and their meaning in their own culture. In Korea we have taken some first step to study cultural nursing phenomena. It is not our intent necessarily to return to the past and develop a nationalistic of nursing, but to identify the core of traditional caring and relate that to professional nursing care. Our Assumptions are as follows : 1) Care is essential for human growth, well being and survial. 2) 7here are diverse and universal forma, expressions, patterns, and processes of human care that exist transcul - turally. 3) The behaviors and functions of caring differ according to the social structure of each culture. 4) Cultures have folk and professional care values, beliefs, and practices. To promote the quality of nursing care we must understand the folk care value, beliefs, and practices. We undertook this study to understand caring in our traditional culture. The Goals of this study were as follows : 1) To identify patterns in caring behavior, 2) To identify the structural components of caring, and 3) To understand the meaning and some principles of caring. We faised several questions in this study. Who is the care-giver? Who is the care-receipient? Was the woman the major care -giver at any time? What are the patterns in caring behavior? What art the priciples underlying the caring process? We used an interdisciplinary team approach, composed of representatives from nursing and anthropology, to contribute in -depth understanding of caring through a socicaltural perspeetive. A Field study was conducted in Ro-Bong, a small agricultural kinship village. The subjects were nine women and one man aged be or more years of age. Data were collected from january 15 to 21, 1990 through opem-ended in-depth interviews and observations. The interview focused on caring behaviors sorrounding birth, aging, death and child rearing. We analysed these data for meaning, pattern and priciples of caring. In this report we describe caring behaviors surrounding childbirth. The care-givers were primarily mothers- in -low, other women in the family older than the mother - to- be, older neighbor woman, husbands, and mothers of the mother-to- be. The care receivers were the mother-to-be the baby, and the immediate family as a component of kinship. Emerging caring behavior included praying, helping proscribing, giving moral advice(Deug - Dam), showing concern, instructing, protecting, making preparations, showing consideration, touching, trusting, encouraging, giving emotional comfort, being with, worrying about, being patient, preventing problems, showing by an example, looking after bringing up, taking care of postnatal health, streng thening the health condition, entering into another's feelings(empathizing), and sharing food, joy and sorrow The emerging caring component were affection, touching, nurtuing, teaching, praying, comforting, encouraging, sharing. empathizing, self - discipline, protecting, preparing, helping and compassion. Emerging principles of. caring were solidarity, heir- archzeal relationships, sex - role distinction. Caring during birth expresses the valve of life and reflects the valued traditional beliefs that human birth is given by god and a unique unifying family event reaching back to include the ancestors and foreward to later generations. In addition, We found positive and rational foundations for traditionl caring behaviors surrounding birth, these should not be stigmatized as inational or superstitious. The nurse appropriately adopts the rational and positive nature of traditional caring behaviors to promote the quality of nursing care.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.25-40
• /
• 2003

The purpose of this thesis is development of detection algorithm for stop-line detector. Detail detection area is set in basing detection area($1.8{\times}4.0m$) and traffic information(volume, occupancy, nonoccupancy) is collected by passive infrared detector at designing detection area. The basis detection area($1.8{\times}4.0m$) is named existing PIR and detection area applied on development algorithm is named proposal PIR. The proposal PIR is collected data such volume, occupancy, nonoccupancy, speed and lane change, but this thesis is limited to evaluate for volume, occupancy and nonoccupancy The procedure and each step of being developed algorithm is described in the next (1) The detection area of proposal PIR is made up of 2 of $1.8{\times}0.6m$ size(the detection area is named 1 and 3) and 1 of $1.8{\times}1.78m$ size(the detection area is named 2) (2) The image detection area is set on monitor to analyze outdoor photographing data then video frame analysis has been done by analyzer. (3) The occupancy, nonoccupancy and speed data of vehicle have been collected with the detection area 1 and 3 and lane change has been collected with combination of detection area 1, 2 and 3 The MAD and MAPE have been utilized to being compared with volume, occupancy and nonoccupancy for the field application and evaluation of a algorithm As the result, the proposal PIR data have been identified superior to the existing PIR data and the effect has been improved its information(volume, occupancy and nonoccupancy)