• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1421-1434
• /
• 2020

The frequency and intensity of heatwaves have been increasing due to climate change. Since urban areas are more severely damaged by heatwaves as they act in combination with the urban heat island phenomenon, every possible preparation for such heat threats is required. Many overseas local governments build heat maps using a variety of spatial information to prepare for and counteract heatwaves, and prepare heatwave measures suitable for each region with different spatial characteristics within a relevant city. Building a heat map is a first and important step to prepare for heatwaves. The cases of heat map construction and thermal environment analysis involve various area distributions from urban units with a large area to local units with a small area. The method of constructing a heat map varies from a method utilizing remote sensing to a method using simulation, but there is no standard for using differentiated spatial information according to spatial scale, so each researcher constructs a heat map and analyzes the thermal environment based on different methods. For the above reason, spatial information standards required for building a heat map according to the analysis scale should be established. To this end, this study examined spatial information, analysis methodology, and final findings related to Korean and oversea analysis studies of heatwaves and urban thermal environments to suggest ways to improve the utilization efficiency of spatial information used to build urban heat maps. As a result of the analysis, it was found that spatial, temporal, and spectral resolutions, as basic resolutions, are necessary to construct a heat map using remote sensing in the use of spatial information. In the use of simulations, it was found that the type of weather data and spatial resolution, which are input condition information for simulation implementation, differ according to the size of analysis target areas. Therefore, when constructing a heat map using remote sensing, spatial, spectral, and temporal resolution should be considered; and in the case of using simulations, the spatial resolution, which is an input condition for simulation implementation, and the conditions of weather information to be inputted, should be considered in advance. As a result of understanding the types of monitoring elements for heatwave analysis, 19 types of elements were identified such as land cover, urban spatial characteristics, buildings, topography, vegetation, and shadows, and it was found that there are differences in the types of the elements by spatial scale. This study is expected to help give direction to relevant studies in terms of the use of spatial information suitable for the size of target areas, and setting monitoring elements, when analyzing heatwaves.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.295-304
• /
• 2022

The purpose of this study is to detect the sorghum panicle using YOLOv5 based on RGB images acquired by a unmanned aerial vehicle (UAV) system. The high-resolution images acquired using the RGB camera mounted in the UAV on September 2, 2022 were split into 512×512 size for YOLOv5 analysis. Sorghum panicles were labeled as bounding boxes in the split image. 2,000images of 512×512 size were divided at a ratio of 6:2:2 and used to train, validate, and test the YOLOv5 model, respectively. When learning with YOLOv5s, which has the fewest parameters among YOLOv5 models, sorghum panicles were detected with mAP@50=0.845. In YOLOv5m with more parameters, sorghum panicles could be detected with mAP@50=0.844. Although the performance of the two models is similar, YOLOv5s ( 4 hours 35 minutes) has a faster training time than YOLOv5m (5 hours 15 minutes). Therefore, in terms of time cost, developing the YOLOv5s model was considered more efficient for detecting sorghum panicles. As an important step in predicting sorghum yield, a technique for detecting sorghum panicles using high-resolution RGB images and the YOLOv5 model was presented.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.1
• /
• pp.56-71
• /
• 2023

Citizens' needs for urban green spaces are on the rise due to improved quality of life and increased interest in environments. The garden is noteworthy because it is small in size, making it less controversial to create in the city, and it is adjacent to the residential area, improving citizens' daily environment. Moreover, recently gardens is attracting attention as a tool for urban regeneration, such as being created in declining areas as part of a government project. Therefore, it is time to study the role and value of urban gardens in deteriorated areas in terms of space welfare. However, there are few studies that quantitatively evaluate the effects of gardens, and many prior studies are limited to focusing the green space larger than a certain size (e.g., parks and forests). Therefore, the aim of this study is to examine the effect of garden and gardening quantitatively, paying attention to social aspects such as life satisfaction and community of inhabitants. The study was conducted in an old row housing complex in Gojan1-dong, Ansan-si, Gyeonggi-do. In there, some of the dwellers voluntarily created outdoor gardens and engaged in gardening for a long time. In addition, after the 2017 Gyeonggi-do Garden Fair, several gardens have been maintained and used by residents there. For the first step, the field trip was done to research the status of the garden in the area, and then, a survey was conducted on whether or not gardening has an impact on the life satisfaction and community of residents. The results were analyzed by t-test and ANOVA. As a result, residents who are engaged in gardening are more active in the "neighborhood exchange" and "resident participation" than those who are not engaged in gardening. In addition, if residents voluntarily create a garden, the level of "satisfaction of life" is higher than those staying in the garden which is constructed by the government. And a resident who is gardening in the complex shows higher life satisfaction than those who garden outside of the complex. These results confirmed that the garden has positive effects promoting "exchanges with neighbors", "participation in the community", and "life satisfaction" of residents. It shows that it is important to ensure the right of residents to participate in the garden-making process as much as possible, and the garden's location should be paid attention to maximize the positive effect of gardens.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.125-148
• /
• 2009

UGC(User Generated Contents) is emerging as the center of e-business in the web 2.0 era. The trend reflects changing roles of users in production and consumption of contents on websites and helps us to understand new strategies of websites such as web portals and social network websites. Nowadays, we consume contents created by other non-professional users for both utilitarian (e.g., knowledge) and hedonic values (e.g., fun). Also, contents produced by ourselves (e.g., photo, video) are posted on websites so that our friends, family, and even the public can consume those contents. This means that non-professionals, who used to be passive audience in the past, are now creating contents and share their UGCs with others in the Web. Accessible media, tools, and applications have also reduced difficulty and complexity in the process of creating contents. Realizing that users create plenty of materials which are very interesting to other people, media companies (i.e., web portals and social networking websites) are adjusting their strategies and business models accordingly. Increased demand of UGC may lead to website visits which are the source of benefits from advertising. Therefore, they put more efforts into making their websites open platforms where UGCs can be created and shared among users without technical and methodological difficulties. Many websites have increasingly adopted new technologies such as RSS and openAPI. Some have even changed the structure of web pages so that UGC can be seen several times to more visitors. This mainstream of UGCs on websites indicates that acquiring more UGCs and supporting participating users have become important things to media companies. Although those companies need to understand why general users have shown increasing interest in creating and posting contents and what is important to them in the process of productions, few research results exist in this area to address these issues. Also, behavioral process in creating video UGCs has not been explored enough for the public to fully understand it. With a solid theoretical background (i.e., theory of implementation intentions), parts of our proposed research model mirror the process of user behaviors in creating video contents, which consist of intention to upload, intention to edit, edit, and upload. In addition, in order to explain how those behavioral intentions are developed, we investigated influences of antecedents from three motivational perspectives (i.e., intrinsic, editing software-oriented, and website's network effect-oriented). First, from the intrinsic motivation perspective, we studied the roles of self-expression, enjoyment, and social attention in forming intention to edit with preferred editing software or in forming intention to upload video contents to preferred websites. Second, we explored the roles of editing software for non-professionals to edit video contents, in terms of how it makes production process easier and how it is useful in the process. Finally, from the website characteristic-oriented perspective, we investigated the role of a website's network externality as an antecedent of users' intention to upload to preferred websites. The rationale is that posting UGCs on websites are basically social-oriented behaviors; thus, users prefer a website with the high level of network externality for contents uploading. This study adopted a longitudinal research design; we emailed recipients twice with different questionnaires. Guided by invitation email including a link to web survey page, respondents answered most of questions except edit and upload at the first survey. They were asked to provide information about UGC editing software they mainly used and preferred website to upload edited contents, and then asked to answer related questions. For example, before answering questions regarding network externality, they individually had to declare the name of the website to which they would be willing to upload. At the end of the first survey, we asked if they agreed to participate in the corresponding survey in a month. During twenty days, 333 complete responses were gathered in the first survey. One month later, we emailed those recipients to ask for participation in the second survey. 185 of the 333 recipients (about 56 percentages) answered in the second survey. Personalized questionnaires were provided for them to remind the names of editing software and website that they reported in the first survey. They answered the degree of editing with the software and the degree of uploading video contents to the website for the past one month. To all recipients of the two surveys, exchange tickets for books (about 5,000~10,000 Korean Won) were provided according to the frequency of participations. PLS analysis shows that user behaviors in creating video contents are well explained by the theory of implementation intentions. In fact, intention to upload significantly influences intention to edit in the process of accomplishing the goal behavior, upload. These relationships show the behavioral process that has been unclear in users' creating video contents for uploading and also highlight important roles of editing in the process. Regarding the intrinsic motivations, the results illustrated that users are likely to edit their own video contents in order to express their own intrinsic traits such as thoughts and feelings. Also, their intention to upload contents in preferred website is formed because they want to attract much attention from others through contents reflecting themselves. This result well corresponds to the roles of the website characteristic, namely, network externality. Based on the PLS results, the network effect of a website has significant influence on users' intention to upload to the preferred website. This indicates that users with social attention motivations are likely to upload their video UGCs to a website whose network size is big enough to realize their motivations easily. Finally, regarding editing software characteristic-oriented motivations, making exclusively-provided editing software more user-friendly (i.e., easy of use, usefulness) plays an important role in leading to users' intention to edit. Our research contributes to both academic scholars and professionals. For researchers, our results show that the theory of implementation intentions is well applied to the video UGC context and very useful to explain the relationship between implementation intentions and goal behaviors. With the theory, this study theoretically and empirically confirmed that editing is a different and important behavior from uploading behavior, and we tested the behavioral process of ordinary users in creating video UGCs, focusing on significant motivational factors in each step. In addition, parts of our research model are also rooted in the solid theoretical background such as the technology acceptance model and the theory of network externality to explain the effects of UGC-related motivations. For practitioners, our results suggest that media companies need to restructure their websites so that users' needs for social interaction through UGC (e.g., self-expression, social attention) are well met. Also, we emphasize strategic importance of the network size of websites in leading non-professionals to upload video contents to the websites. Those websites need to find a way to utilize the network effects for acquiring more UGCs. Finally, we suggest that some ways to improve editing software be considered as a way to increase edit behavior which is a very important process leading to UGC uploading.

• Investigative Magnetic Resonance Imaging
• /
• v.6 no.1
• /
• pp.64-72
• /
• 2002

Purpose : To introduce and demonstrate the advantages of the new hybrid two-dimensional (2D) proton spectroscopic imaging (SI) over the single voxel spectroscopy (SVS) and conventional 2D SI in the clinical application of spectroscopy for pediatric cerebral disease. Materials and Methods : Eighty-one hybrid 2D proton spectroscopic imaging was performed in 79 children (36 normal infants and children, 10 with hypoxic-ischemic injury, 20 with toxic-metabolic encephalopathy, seven with brain tumor, three with meningoencephalitis, one with neurofibromatosis, one with Sturge-Weber syndrome and one with lissencephaly) ranging in age from the third day of life to 15 years. In adult volunteers (n=5), all three techniques including hybrid 2D proton SI, SVS using PRESS sequence, and conventional 2D proton SI were performed. Both hybrid 2D proton SI and SVS using PRESS sequence were performed in clinical cases (n=). All measurements were performed with a 1.5-T scanner using standard head quadrature coil. The 16$\times$16 phase encoding steps were set on variable field of view (FOV) depending on the size of the brain. The hybrid volume of interest inside FOV was set as $75{\times}75{\times}15{\;}\textrm{mm}^3$ or smaller to get rid of unwanted fat signal. Point-resolved spectroscopy (TR/TE=1,500 msec/135 or 270msec) was employed with standard chemical shift selective saturation (CHESSI pulses for water suppression. The acquisition time and spectral quality of hybrid 2D proton SI were compared with those of SVS and conventional 2D proton SI. Results : The hybrid 2D proton SI was successfully conducted upon all patients.

• Journal of Acupuncture Research
• /
• v.27 no.3
• /
• pp.147-157
• /
• 2010

Objectives : The purpose of this study was to propose appropriate strategic directions and road maps for successful achievement of programs preventing winter disease in the summer. Methods : Details on programs preventing winter disease in the summer such as clear concept, theoretical basis, current status, intervention or available prescriptions and indication/contraindication/caution were prepared through the related journal review, upon which an observational study was devised and done for simulation to find out even a trivial problem and to guarantee the safety beforehand. The experimental group was divided into 5 groups by the size of pill and the way ginger is treated; 1cm pill with ginger group, 3cm pill group without ginger, 3cm pill group dipped into ginger, 3cm pill group applying ginger to acupoints and 3cm pill group with ginger Results 1. program preventing winter disease in the summer was defined as representative winter diseases such as common cold, influenza, chronic asthma, chronic bronchitis, allergic rhinitis, emphysema, chronic gastritis and rheumatoid arthritis, and preventive care in the summer, reinforcing deficient yang qi of five viscera by using exuberant yang qi from summer heat. 2. It was based upon historically established theories which is 'nourishing yang qi in the spring and summer', 'long summer, namely rainy spell in the summer overwhelms the winter, because of earth winning water according to the five phases theory' and 'To replenish yang qi is major principle to treat winter diseases, which can be most appropriately and timely applied to the patient with deficient yang qi of five viscera inherently, especially in the three dog days of the summer, because of exuberant exterior yang qi and deficient interior yang qi in the five viscera'. 3. In the adjacent China and Taiwan, acupoint applying method in the three dog days named 'San Fu Tie' have been stirring a boom throughout the nation, in which Xiaochuan Gao was used as a basic prescription and it mainly was applied at bilateral $BL_{13}$, $_{15}$ and $_{17}$ for about 4 hours. As far as domestic current status, the necessity of adopting the above method prior to Herbal formula was also recognised, because not a few koreans have apprehension for the safety of it including medicinal herbs and are reluctant to take it any more due to negative advertisement of narrow minded doctors' association. 4. Indication of acupoint applying method in the three dog days included most of winter diseases such as common cold, influenza, chronic asthma, chronic bronchitis, allergic rhinitis, emphysema, chronic gastritis. contraindication was pregnant woman and the weak such as infants and the old. More attention was paid to grasp firmly the normal reaction following the treatment for preventing side effect and teasing blister. recommendation was also given to abstain from food inducing phlegm and dampness such as meat, shrimp and crab as well as cold drinks and foods 5. In the simulation observational study based upon the above findings following review the related articles, no blister was shown on the acupoints icluding bilateral $BL_{13}$, $_{15}$ and $_{17}$ in every experimental group during 24hr observation following the acupoint applying treatment with pills made by modified and devised prescription. At 4 hr, the effectiveness of it reached a peak showing redness and mild tenderness and there is little difference between groups 3cm pills groups regardless of the way ginger was treated. abdominal distention and growling was found in all the volunteers during the treatment at CV 8. Strategic directions and road maps : Through successful fulfillment of the program preventing winter disease in the summer, Korean traditional medicine should be integrated into mainstream national health care services. Cultural access was thought to be as important as Scientific EBM approach. First of all, To evoke potential cultural homogeneity from campaigns and press advertisement was needed for promoting public awareness about preventing winter disease in the summer by enhancing immunity via acupoint applying treatment in the three dog days, and then indigenous name as Sambokcheop, protocol, Clinical Research Form for data collection of it should be developed and prepared. Once the first step was taken this summer, through a thorough data collection and scrutinized scientific evaluation, drawbacks should be compensted for and the efficacy and safety should be substantiated.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.53-63
• /
• 2010

It constitutes a very important preliminary step to analyze how city image is assessed in order to determine the direction towards a desirable city image in planning on an urban landscape for future city image. This study aims to quantify the recognition and evaluation of a city image on the part of citizens, using multidimensional scaling and correspondence analysis. Furthermore, this study hopes to contribute to the quantified policy-making for improving city image by understanding how professionals and civil servants in the related field tend to recognize such image. The results from the study are as follow: 1. The image of Daejon City tends to be assessed strongly in the light of its history, dynamics, and size. While the City is recognized as new and changing in general, the civil servants consider the city as modest, and the professionals as mediocre. Therefore, the City should strive to conceive its own unique identity, which would lessen the current image of modest and mediocre. 2. Gap river, Dunsan New Town, and the Daeduk Reseach Complex turn out to be the symbolic representative venues of Daejon City, inspiring the city’s image. In contrast, Yoosung Springs, the original town, and the Expo Park do not fit the image of the City. The need to renovate these places presents itself. 3. As for the questions using “like” and “not-like”, citizens and professionals show the tendency of not liking the city’s image, whereas civil servants like it. It follows that the City needs to highlight its “modern and high-technological” image, illuminated by Dunsan New Town and Daeduk Reseach Complex. 4. An image positioning drawn from a correspondence analysis shows that the City of Daejeon can be classified as an administrative and horizontal city. As opposed to the prior simplistic analyses of city image, this study attempts to diagnose it accurately, so as to help with the gearing towards city images in the future.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.209-218
• /
• 2008

According to improved radiation therapy technology such as IMRT and proton therapy, the accuracy of patient alignment system is more emphasized and IGRT is dominated research field in radiation oncology. We proposed to study the feasibility of cone-beam CT system using simple x-ray imaging systems for image guided proton therapy at National Cancer Center. 180 projection views ($2,304{\times}3,200$, 14 bit with 127 ${\mu}m$ pixel pitch) for the geometrical calibration phantom and humanoid phantoms (skull, abdomen) were acquired with $2^{\circ}$ step angle using x-ray imaging system of proton therapy gantry room ($360^{\circ}$ for 1 rotation). The geometrical calibration was performed for misalignments between the x-ray source and the flat-panel detector, such as distances and slanted angle using available algorithm. With the geometrically calibrated projection view, Feldkamp cone-beam algorithm using Ram-Lak filter was implemented for CBCT reconstruction images for skull and abdomen phantom. The distance from x-ray source to the gantry isocenter, the distance from the flat panel to the isocenter were calculated as 1,517.5 mm, 591.12 mm and the rotated angle of flat panel detector around x-ray beam axis was considered as $0.25^{\circ}$. It was observed that the blurring artifacts, originated from the rotation of the detector, in the reconstructed toomographs were significantly reduced after the geometrical calibration. The demonstrated CBCT images for the skull and abdomen phantoms are very promising. We performed the geometrical calibration of the large gantry rotation system with simple x-ray imaging devices for CBCT reconstruction. The CBCT system for proton therapy will be used as a main patient alignment system for image guided proton therapy.