• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2008년도 발표논문집
• /
• pp.156-159
• /
• 2008

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2008년도 발표 논문집 제17권
• /
• pp.156-159
• /
• 2008

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.182-188
• /
• 2001

A solenoid-type MEMS inductor with a quality factor over 10 at 2 GHz has been developed using an electroplating technique. The integrated spiral inductor has a low Q factor due to substrate loss and skin effects. It also occupies a large area compared to the solenoid-type inductor. The direction of flux of the solenoid-type inductor is parallel to the substrate, which can lower the substrate loss and other interference with integrated passive components. To estimate the characteristics of the proposed inductor over a high frequency range, the 3D FEM (Finite Element Method) simulation is used by using the HFSS at the Ansoft corporation. The electroplated solenoid-type inductor is fabricated on a glass substrate step by step by using photolithography and copper electroplating. The fabrication process to improve the quality factor of the inductor is also developed. The achieved inductance varies within a range from 0.5 nH to 2.8 nH, and the maximum Q factor is over 10.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.15-17
• /
• 1996

In this paper, a modified microstep drive of PM step motor is presented. The open-loop drive of a step motor is attractive and widely accepted in applications of speed and position controls. However, the performance of the step motor is limited under the open-loop drive. The closed-loop control is advantages over the open-loop control not only in that step failure never occurs but that the motion is much quicker and smoother. However, a high resolution sensor is needed for detecting position and speed. The modified microstep drive is constructed as a microstep drive with speed feedback. The advantages of the proposed method is that the controller can be designed by a low resolution sensor and is simpler than other closed-loop controller. A concept of vector control is used for verifying the proposed scheme. Simulations show the performance of the proposed method and a comparison with a classic drive method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.633-637
• /
• 2001

본 논문은 모델기반 다중이동물체 추적을 위한 모델생성 알고리즘을 제안하였다. 제안한 알고리즘은 배경영상에 이동물체가 초기 진입했을 때의 초기모델생성 단계와 이동물체 추적 단계에서의 모델 갱신 단계로 구분하였다. 초기모델생성 단계에서는 차영상과 클러스터링 기법을 이용하여 분할된 분할영상과 현재프레임 영상에 대한 윤곽선 영상과의 로직 AND 연산을 수행하여 초기모델을 생성하였다. 모델갱신 단계에서는 하우스돌프 거리(Hausdorff Distance)와 2D-Logarithmic 탐색 알고리즘을 이용하여 추적중인 이동물체의 형태변화에 적응할 수 있도록 매 프레임 마다 새로운 모델을 갱신하였다. 실험은 도로에서 주행하는 자동차를 대상으로 도_의 실험을 수행하였다. 그 결과 도로에서 주행하는 자동차의 진입방향과 추적 대상 수가 불규칙한 경우에도 모델생성이 98% 이상 이루어짐을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.868-873
• /
• 2011

In this study, the fabrication of ultra fine grained Mo bulk was conducted. $MoO_3$ nanopowders were prepared by a high energy ball-milling process and then reduced at the temperature of $800^{\circ}C$ without holding time in $H_2$ atmosphere. The particle size of Mo nanopowder was ~150 nm and grain size was ~40 nm. The two-step process was employed for the sintering of Mo nanopowder to obtain fine grain size. The densification over 90% could be obtained by the two-step sintering with a grain size of less than 660 nm. For higher density, modified two-step sintering was designed. 95% of theoretical density with the grain size of 730 nm was obtained by the modified two-step sintering.

• 대한물리의학회지
• /
• 제12권4호
• /
• pp.11-18
• /
• 2017

PURPOSE: The purpose of this study was to examine the effects of sciatic nerve mobilization techniques on straight leg raising (SLR) and walking ability in elderly women aged over 65. METHODS: Seventy women aged over 65 were examined using SLR test and forty women were selected as subjects. They were divided into Group I (under $70^{\circ}$ of SLR test of both legs, n=20) and Group II (over $70^{\circ}$ of SLR test of both legs, n=20). Nerve mobilization was applied to both groups (three times a week for 4 weeks). SLR angle was measured using digital goniometer and walking ability was measured by step length, stride length, velocity, double support, using GAITRite System. After 4 weeks, paired t-test was used to compare the changes of SLR test and walking ability within Group I and Group II. RESULTS: In Group I, SLR test, step length, stride length and gait velocity were significantly increased but double support was significantly difference. In Group II, SLR test, step length and stride length were significantly increased but gait velocity was not significantly increased and double support was significantly decreased. CONCLUSION: This study showed that sciatic nerve mobilization techniques had positive effects on the SLR angle and walking ability in elderly women.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1382-1387
• /
• 2017

Objective: During the last decade, genetic evaluation of dairy cows using longitudinal data (test day milk yield or 305-day milk yield) using random regression method has been officially adopted in several countries. The objectives of this study were to estimate covariance functions for genetic and permanent environmental effects and to obtain genetic parameters of 305-day milk yield over seven parities. Methods: Data including 60,279 total 305-day milk yield of 17,309 Iranian Holstein dairy cows in 7 parities calved between 20 to 140 months between 2004 and 2011. Residual variances were modeled by homogeneous and step functions with 7 and 10 classes. Results: The results showed that a third order polynomial for additive genetic and permanent environmental effects plus a step function with 10 classes for the residual variance was the most adequate and parsimonious model to describe the covariance structure of the data. Heritability estimates obtained by this model varied from 0.17 to 0.28. The performance of this model was better than repeatability model. Moreover, 10 classes of residual variance produce the more accurate result than 7 classes or homogeneous residual effect. Conclusion: A quadratic Legendre polynomial for additive genetic and permanent environmental effects with 10 step function residual classes are sufficient to produce a parsimonious model that explained the change in 305-day milk yield over consecutive parities of Iranian Holstein cows.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.199-206
• /
• 2012

HC-SCR was conducted over Co-Pt/ZSM5 catalyst coated over 200 cpsi cordierite in the condition of atomspheric pressure and $200^{\circ}C-500^{\circ}C$. Weight ratio of Co/Pt determined from EDX analysis was 8/2, which was almost equal to the weight ratio at preparation step. XPS showed that nitrates within cobalt precursor and chlorine withn Pt precursor were removed. TEM result demonstrated that crystallite size of cobalt and Pt was under 5nm. Among these tested hydrocarbon reductants, isobutane ($i-C_4H_{10}$) showed the highest de-$NO_x$ yield of 80% under the condition of the mole ratio of reductant/NOx=1.0 at $180^{\circ}C$. De-$NO_x$ yield from HC-SCR was increased as the carbon number of hydrocarbon reductant was increased. The decrease of bonding energy between C and H of HC reductant played a role to increase of de-$NO_x$ yield, which indicated that the dissociation step of C-H bond of hydrocarbon molecule might be the rate determining step of HC-SCR. The increase of oxygen concentration in the feed resulted in the decrease of de-$NO_x$ yield but the increase of CO and $N_2O$ yield.