• 한국운동역학회지
• /
• 제24권3호
• /
• pp.209-216
• /
• 2014

The purpose of this study was to explore the effect of 8 weeks after school classes of track sports on students' start motion through kinematic variables. 30 students in D National university of education participated for this study. These students divided into two groups, 17 students for experimental group and 13 students for control group. The two groups participated in general athletic class as common class, and the experimental group participated in after school class additionally. The general class taught track and jump skill for 3 hours a week, and the after school class taught only athletic running skill for 30 minutes a week. Pre and post test assessed to assess students' kinematic changes. Findings indicated that velocity and step rate were increased, and contact time, step length, displacement of center of mass were decreased in the experimental group. In the control group, early velocity, knee/hip angle velocity were increased, and contact time, step length, displacement of center of mass were decreased. In conclusion, the students who only participated in general class, could not maintain athletic skills obtained from the class. However, students who participated in both general and after school class accomplish athletic start skill. This is because Continuous learning effect helped students keep the skill and did not lose the skill. Thus, in order for students to learn specific sport skills, joining after school class with general class together is recommended.

• 한국조경학회지
• /
• 제23권2호
• /
• pp.157-166
• /
• 1995

To investigate walkability of ramps, walking patterns of 18 healthy adults,12 aged 20 to 26 and 6 aged 68 to 76,were studied at free,rhythm constrained walking up or down ramp using goniometer and footswitch Ramp inclinations were set 4,8,12,16,20 degrees. The results were as follows. 1)The step length of subjects were decreased significantly in12$^{\circ}C$′or 16′free downramp walking. With regard to step length, some subject groups walked abnormally in 16" or 20" ramp walking 2) The step width of subjects were increased significantly in 12" or 16" ramp walking. 3) The cadence duration of some subject groups were increased in 12" upramp walking. 4) The double stance duration and double stance ratio of some subject groups were increased significantly in 8",12", or 16"upramp walking. 5) The maximum knee flexion angle of stance phase were increased in 12" ramp walking. 6)Most temporal parameters and spatial parameters of gait were increased or decreassd greatly between 4" ramp and 8" ramp or between 8′ramp and 12′ramp. But statistics significancy were not recognized 7) The results suggest that ramp inclination less than 8′(14%) -12′(21%) is desirable for the normal gait the ramp inclination must not exceed 16" -20" in unavoidable circumstances.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.254-261
• /
• 2000

Since callus distraction technique was applied clinically for the correction of dentofacial deformity to the patients with hemifacial dysplasia by McCarthy in 1992, many surgeons have tried to apply this method to the maxillofacial region. But this technique has some drawbacks. One of the disadvantages of this technique is extensive scar formation in the facial area, which is a sequelae of extraoral approach for supraperiosteal dissection of the periosteum overlying the mandible. Recently, we have made an effort to perform this technique through intraoral approaches to prevent scar formation on the submandibular area and modified the design of the osteotomy, that is step osteotomy technique, to increase the raw bone surface on both osteotomized segments. The rationale for the application of this step osteotomy technique is to increase the amount of regenerated bone and the length of distraction, to avoid damage of inferior alveolar neurovascular bundle, and to increase initial stability of the splitted segments. Step osteotomy procedure can be done with fine micro-osteotomy saw through subperiosteal tunneling. Extraoral pins should be inserted before making the osteotomy. Since 1994 we have applied this technique at 8 sites In 5 patients with mandibular deficiencies: 2 cases of hemifacial microsomia, 1 case of developmental facial asymmetry and 2 cases of mandibular bony defect. Mandibular elongation have been achieved from 12 to 20mm in length. 1 out of 8 site, we experienced non-union in the case of mandibular body defect. Some skeletal relapse and growth retardation phenomenon have been observed in some cases with the longest follow-up of 48 months.

• Physical Therapy Rehabilitation Science
• /
• 제9권2호
• /
• pp.105-112
• /
• 2020

Objective: To investigate the effects of training using a trunk control robot (TCR) system combined with conventional therapy (CT) on balance and gait abilities in persons with chronic stroke. Design: Two-group pretest-posttest design. Methods: Thirty-five subjects with chronic stroke were randomly assigned to either the TCR group (n=17) or the trunk extension-training (TET) group (n=18). Both groups performed CT for 30 minutes, after which the TCR group performed TCR training and the TET group performed trunk extension training for 20 minutes. Both groups performed the therapeutic interventions 3 days per week for 6 weeks. Balance ability was evaluated using the Berg Balance Scale (BBS), and the Timed Up-and-Go (TUG) test. Gait ability was measured using the 10 m Walk Test (10MWT) and the NeuroCom Smart Balance Master. Results: TCR group showed significant improvements in static balance (weight bearing) and dynamic balance (weight shifting speed, weight shifting direction, BBS, and TUG), 10MWT, gait speed, and step width (p<0.05); step length was not significant. The TET group showed a significant partial improvement of dynamic balance (weight shifting speed, weight shifting direction, BBS, and 10MWT (p<0.05), but the improvements in static balance, TUG, gait speed, and step width and step length was not significant. Additionally, significant differences in static balance, dynamic balance (weight shifting speed, weight shifting direction, BBS, and TUG), 10MWT, gait speed, and step width were detected between groups (p<0.05). Conclusions: TCR training combined with CT is effective in improving static and dynamic balance, as well as gait abilities in persons with chronic stroke.

• Restorative Dentistry and Endodontics
• /
• 제39권1호
• /
• pp.24-31
• /
• 2014

Objectives: The purpose of present study was to evaluate the internal adaptation of composite restorations using different adhesive systems. Materials and Methods: Typical class I cavities were prepared in 32 human third molars. The teeth were divided into the following four groups: 3-step etch-and-rinse, 2-step etch-and-rinse, 2-step self-etch and 1-step self-etch system were used. After the dentin adhesives were applied, composite resins were filled and light-cured in two layers. Then, silver nitrate solution was infiltrated, and all of the samples were scanned by micro-CT before and after thermo-mechanical load cycling. For each image, the length to which silver nitrate infiltrated, as a percentage of the whole pulpal floor length, was calculated (%SP). To evaluate the internal adaptation using conventional method, the samples were cut into 3 pieces by two sectioning at an interval of 1 mm in the middle of the cavity and they were dyed with Rhodamine-B. The cross sections of the specimens were examined by stereomicroscope. The lengths of the parts where actual leakage was shown were measured and calculated as a percentage of real leakage (%RP). The values for %SP and %RP were compared. Results: After thermo-mechanical loading, all specimens showed significantly increased %SP compared to before thermo-mechanical loading and 1-step self-etch system had the highest %SP (p < 0.05). There was a tendency for %SP and %RP to show similar microleakage percentage depending on its sectioning. Conclusions: After thermo-mechanical load cycling, there were differences in internal adaptation among the groups using different adhesive systems.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

• The Journal of Korean Physical Therapy
• /
• 제26권3호
• /
• pp.196-201
• /
• 2014

Purpose: The novelty of intensive mobility training (IMT) is its intensive nature. The purpose of this study was to examine the effect of IMT in patients with Parkinson's disease. Methods: Subjects participated in 3 hours/day for ten days (30 hours). Gait parameters of interest were the timed up-and-go test, 10-m walk test, and step length and width. Measures were made at baseline before commencement of training (pre-training) and at the end of the two-week training period (post-training). Results: Seven patients with Parkinson's disease enrolled in the study. On average, participants are able to tolerate 141 minutes of activity during a 180-minute session. Results showed that, after 10 consecutive days training, subjects significantly improved for all parameters; the timed up-and-go test, 10-m walk test, and stride length and step width. Conclusion: This study's findings show that gait properties in patients with Parkinson's disease can be improved with IMT.

• 한국전문물리치료학회지
• /
• 제10권1호
• /
• pp.29-35
• /
• 2003

Body weight support treadmill training is a new and promising therapy in gait rehabilitation of patients with hemiplegia. The purpose of this study was to identify the effects of body weight support treadmill training on gait and standing balance in patients with hemiplegia. Eighteen patients with hemiplegia participated in the study. A 10 m-timed walk test, measurements of step length and standing balance score were administered. Intervention consisted of body weight support treadmill training five times a week for 2 weeks. The data were analyzed by paired t-test. Body weight support treadmill training scoring of standing balance, step length and 10 m-timed walk test showed a definite improvement. Body weight support treadmill training offers the advantages of task-oriented training with numerous repetitions of a supervised gait pattern. The outcomes suggest that patients with hemiplegia can improve their gait ability and standing balance through body weight support treadmill training.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.530-533
• /
• 1996

This paper deals with finding an initial solution and modifying search direction by the centrering force in the predictor-corrector method which is a variant of the primal-dual barrier method. These methods were tested with NETLIB problems. Initial solutions which are located close to the center of the feasible set lower the number of iterations, as they enlarge the step length. Three heuristic methods to find such initial solution are suggested. The new methods reduce the average number of iterations by 52% to at most, compared with the old method assigning 1 to initial valurs. Solutions can move closer to the central path fast by enlarging the centering force in early steps. It enlarge the step length, so reduces the number of iterations. The more effective this method is the closer the initial solution is to the boundary of the feasible set.

• 한국전문물리치료학회지
• /
• 제11권2호
• /
• pp.63-70
• /
• 2004

These were two main purposes of this study. The first was to research the relevance between gross motor function measurement (GMFM) and the spatiotemporal parameters of gait in children with cerebral palsy. The second was to research the relevance between gross motor performance measure (GMPM) and the spatiotemporal gait parameters. Twelve children ($6.0{\pm}1.8$ years) with cerebral palsy participated in this study. GMFM and GMPM were performed and the spatiotemporal parameters of gait were measured by using WalkWay MG-1000. There were no significant correlations between the GMFM score and the stride length, step length, step width, cadence, and velocity (p>.05). The GMPM score also had no significant correlation with the spatiotemporal gait parameter (p>.05).