• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.159-165
• /
• 2012

The accurate focusing position should be determined for accurate measurements In VMS. Camera lens focusing is an important problem in computer vision and video measuring systems (VMS) that use CCD cameras and high precision XYZ stages. Camera focusing is a very important step in high precision measurement systems that use computer vision technique. The auto focusing process consists of two steps, the focus value measurement step and the exact focusing position determination step. It is suitable for eliminating high frequency noises with lower processing time and without blurring. An automatic focusing technique is applied to measure a crater with a one-dimensional search algorithm for finding the best focus. Throughout this paper, the suggested algorithm for the Auto focusing was combined with the learning. As a result, it is expected that such a combination would be expanded into the system of recognizing voices in a noisy environment.

• Structural Engineering and Mechanics
• /
• 제29권5호
• /
• pp.531-550
• /
• 2008

This paper adopts the numerical assembly method (NAM) to determine the exact solutions of natural frequencies and mode shapes of a multi-span and multi-step beam carrying a number of various concentrated elements including point masses, rotary inertias, linear springs, rotational springs and springmass systems. First, the coefficient matrix for an intermediate station with various concentrated elements, cross-section change and/or pinned support and the ones for the left-end and right-end supports of a beam are derived. Next, the overall coefficient matrix for the entire beam is obtained using the numerical assembly technique of the conventional finite element method (FEM). Finally, the exact solutions for the natural frequencies of the vibrating system are determined by equating the determinant of the last overall coefficient matrix to zero and the associated mode shapes are obtained by substituting the corresponding values of integration constants into the associated eigenfunctions.

• 약학회지
• /
• 제58권1호
• /
• pp.7-11
• /
• 2014

To study the resistance mechanism of E. faecalis to LCB01-0371, several resistant mutants to LCB01-0371 or linezolid were isolated by step-wise selection. The frequency of spontaneous mutations resistant to LCB01-0371 was lower than that of linezolid in E. faecalis. The genetic variations in resistant mutants were analyzed by DNA sequencing of domain V of 23S rRNA in each mutant. The first-step mutant to LCB01-0371 had a G2576T point mutation in V domain of 23S rRNA. However, no resistant mutant to LCB01-0371 was isolated in second-step mutant selection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.220-222
• /
• 2004

The piezoelectric ceramics for a step-up piezoelectric transformer are desired large electromechanical coupling factor, high mechanical quality factor and good characteristic resonance frequency. In this study, the empirical formula of specimens is used $0.9Pb(Zr_xTi_{1-x})O_3-0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$ (PZT-PMNS). The piezoelectric and dielectric characteristic are investigated by sintering temperature and value of x as functions of $Ti^{2+}$, $Zi^{2+}$ mol rate. MPB(morphotropic phase boundary) is defined in the x=0.522. Because it is appeared to the best piezoelectric and dielectric characteristic in the x=0.522, it can be application of step-up transformer.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1562-1568
• /
• 2014

Based on the average method and the geometrical technique to calculate the average value, the average model of the open-loop step-up converter in CCM operation is established. The DC equilibrium point and corresponding small signal model is derived. The control-to-output transfer function is presented and analyzed. The theoretical analysis and PSIM simulations shows that the control-to-output transfer function includes not only the DC input voltage and the DC duty cycle, but also the two inductors, the two energy-transferring capacitors, the switching frequency and the load. Finally, the hardware circuit is designed, and the circuit experimental results are given to confirm the effectiveness of theoretical derivations and analysis.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.332-336
• /
• 2007

In this study, multilayer piezoelectric transformer was manufactured using the PMN-PNN-PZT ceramic and then the electrical characteristics were investigated according to the variations of frequency and load resistance. The voltage step-up ratio of multilayer piezoelectric transformer showed the maximum value at the vicinity of 75 kHz and increased according to the increase of load resistance. When the output impedance coincided with the load resistance, the multilayer piezoelectric transformer showed the temperature rise of less than $20^{\circ}C$ at the output power of 20 W. As the results, the multilayer piezoelectric transformer manufactured at low co-firing temperature of $940^{\circ}C$ using PMN-PNN-PZT ceramics could be stably driven as the step-down transformers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.233-240
• /
• 1998

This paper presents a high efficiency low switching PWM technique for the propulsion system of Electric car. In order to achieve the continuous voltage control to six-step and a low harmonics with low switching frequency under 500㎐, the synchronous technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method is shown by the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons electric cars.

• 대한전자공학회논문지TC
• /
• 제42권7호
• /
• pp.35-40
• /
• 2005

본 논문에서는 900MHz 대역 중저속 무선 통신용 칩에 이용되는 3차 ${\Delta}{\sum}$ modulator를 사용한 Fractional-N PLL 주파수 합성기를 설계 및 제작하였다 우수한 위상노이즈 특성을 얻기 위해 노이즈 특성이 좋은LC VCO를 사용하였다. 그리고 고착시간을 줄이기 위해서 Charge Pump의 펌핑 전류를 주파수 천이 값에 따라 조절할 수 있도록 제작하였고 PFD의 참조 주파수를 3MHz까지 높였다. 또한 참조 주파수를 높이는 동시에 PLL의 최소 주파수 천이 간격을 10KHz까지 줄일 수 있도록 하기위하여 36/37 Fractional-N 분주기를 제작하였다. Fractional Spur를 줄이기 위해서 3차 ${\Delta}{\sum}$ modulator를 사용하였다. 그리고 VCO, Divider by 8 Prescaler, PFD, 및 Charge Pump는 0.25um CMOS공정으로 제작되었으며, 루프 필터는 외부 컴포넌트를 이용한 3차RC 필터로 제작되었다. 그리고 Fractional-N 분주기와 3차 ${\Delta}{\sum}$ modulator는 VHDL 코드로 작성되었으며 Xilinx Spartan2E을 사용한 FPGA 보드로 구현되었다. 측정결과 PLL의 출력 전력은 약 -11dBm이고, 위상노이즈는 100kHz offset 주파수에서 -77.75dBc/Hz이다. 최소 주파수 간격은 10kHz이고, 최대 주파수 천이는 10MHz이고, 최대 주파수 변이 조건에서 고착시간은 약 800us이다.

• 대한전자공학회논문지
• /
• 제11권4호
• /
• pp.29-37
• /
• 1974

횡공진등가회로에서 전송선 매트릭스식을 세워 스텝-리지도파관의 속단파장을 주는 특성방정식을 유도하고 반복근사법으로 수치해석하였다. 또한 전자계성분 및 이들간의 관계를 불연속전계에 의한 고차항을 도입하여 근사적으로 표시하고 이것에서 특성임피이던스를 평균전력의 개념에서 구하고 이들을 실험으로 확인하였다. 차단파장은 도파관의 윗면과 스텝면과의 갭이 작을수록 커지며 또한 스텝의 옆폭이 늘어 남에 따라 증가하고 최적치는 갭의 비가 일정시, S /a이 0.3∼0.5이고 S /a가 0.7∼0.85일 때임을 나타내었다. 특성임피던스는 빈도파관때보다 낮은 값을 나타내어 낮은 특성임피던스를 갖는 다른 도액관이나 전송선과 임괴던스정합을 행하기에 적합하며 X대역용 도파관의 크기이면서 낮은 편파수인 3∼4GHz까지 통과시킬 수 있는 광대역인 소형 도파관을 실현할 수 있었다.

• 한국항해항만학회지
• /
• 제35권1호
• /
• pp.23-30
• /
• 2011

본 논문은, 국적일반화물선 공식안전성평가(Formal Safety Assessment, 이하 FSA) 연구의 1, 2 단계에 해당하는 위험요소 식별(Hazard identification) 및 식별된 사고 시나리오에 대한 위험도 분석(Risk analysis) 결과를 소개한 "국적일반화물선 초기안전성평가 연구(1)"에 이어 FSA 연구의 3, 4 그리고 5단계를 수행한 내용으로, 국적일반화물선의 운용 중 발생 가능한 위험을 저감할 수 있는 위험도제어방안들(Risk Control Options)을 식별하는 단계(Step 3)와 식별된 위험도제어방안들 중 전문가 의견수렴을 통하여 선별된 위험도제어방안들을 대상으로 한 비용-효과 평가 단계(Step 4: Cost-Benefit Assessment) 그리고 비용-효과 평가의 결과를 정리하여 국적일반화물선의 안전성 제고를 위한 구체적인 방안을 제안하는 단계(Step 5: Recommendation for Decision Making)의 결과를 소개하였다.