• 한국운동역학회지
• /
• 제24권1호
• /
• pp.67-74
• /
• 2014

This study researched into the left-right inclination of the rear foot at the lower limb joints, knee joint angle, angular velocity of the knee joint, angular acceleration and the max. Based on the analysis of kinematics according to the changes in the height of step box (6, 8, 10 inches) during step aerobics of female college students majoring in physical education. The findings of this study are as follows: Then angle of the knee joint decreased as the height of the step box increased the min. Angle was measured right before the right foot was on the step box, and the angle tended to decrease as the step box get heightened. The left-right inclination of the rearfoot angle according to the height of step box increased as the height increased. In the 'pull-up' stage during which the weight was loaded on the right foot the angle increased, while in the right foot stepping stage during which the right foot was on the ground, the left-right inclination of the rearfoot angle increased as the height of the step box increased. The angular velocity of the knee joint according to the height of step box started increasing when the right foot initially stepped on the step box and during the initial stepping section, the angular velocity decreased as the height of step box increased. The changes in angular acceleration of the knee joint according to the height of step box increased as the height of step box increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.261-266
• /
• 1994

The objective of this study is to develop the expert system for R/C box culvert design. This program provided various functions to improve automatic design. The program is composed of five steps. The characteristics of each step are as follows; 1) Preprocessing Step, 2) Analysis Step, 3) View of Memberforce Step, 4) Postprocessing Step, 5) Printing of Design-Sheet Step. Finally, Expert System and Knowledge Database System is developed for the drawing of optimal R/C box-culvert design.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 2001

In this study, the methodology to develop a data model for steel box girder bridge based on STEP part 104 is presented. The concept of STEP and the schema of part 104 are briefly reviewed, and then the procedure of data model standardization is described. A new data model for steel box girder bridge is developed by incorporating with not only the geometric and topological representation schema of the part 42 but also the representation structure information of the part 43 and the detailed finite element analysis information of the part 104. The prototype of integrated finite element analysis(FEA) system by interfacing STEP physical file is also presented. The applicability of developed data model for FEA is verified by preprocessor system of FEA.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.673-693
• /
• 2005

A general step-by-step simulation for the time-dependent analysis of segmentally-erected prestressed concrete box-girder bridges is presented. A three dimensional finite-element model for the balanced-cantilever construction of segmental bridges, including effects of the load history, material nonlinearity, creep, shrinkage, and aging of concrete and the relaxation of prestressing steel was developed using ABAQUS software. The models included three-dimensional shell elements to model the box-girder walls and Rebar elements representing the prestressing tendons. The step-by-step procedure allows simulating the construction stages, effects of time-dependent deformations of materials and changes in the structural system of the bridges. The structural responses during construction and throughout the service life were traced. A comparison of the developed computer simulation with available experimental results was conducted and good agreement was found. Deflection of the bridge deck, changes in stresses and strains and the redistribution of internal forces were calculated for different examples of bridges, built by the balanced-cantilever method, over thirty-year duration. Significant time-dependent effects on the bridge deflections and redistribution of internal forces and stresses were observed. The ultimate load carrying capacities of the bridges and the behavior before collapse were also determined. It was observed that the ultimate load carrying capacity of such bridges decreases with time as a result of time-dependent effects.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.305-310
• /
• 2012

Planetary gear box is a power transmitter having very high gear ratio in compact volume. The planetary step-down gear box converts high speed and low torque into low speed and high torque, which is widely used in constructional and industrial machinery field. And, the planetary step-up gear box does vice versa working, which is used as main gear box of large sized wind mill system. The large sized planetary gear box must be performed the normal-opposite rotation test as a its durability test for achieving the reliability. The large sized planetary gear box is composed by triple gear trains of sun gear, carrier, and ring gear. If input power is supplied into one of them and the other is fixed, and then another becomes the output part. In this paper, we designed a new test equipment which can do rapid normal and opposite rotational change with only small displacement by supplying test power using the above rotation (driving) characteristics and hydraulic cylinder and link, and also compared and analyzed with existing method through various experiments.

• 한국학교수학회논문집
• /
• 제18권2호
• /
• pp.223-240
• /
• 2015

본 논문의 목적은 미적분에 관한 보충학습을 요하는 이공계 대학생들을 위하여 공업수학의 벡터미적분 교육을 중심으로 개념적 이해와 계산 과정의 단계별 풀이를 보여주는 웹 기반 이러닝 콘텐츠를 설계 및 개발하는 것이다. 이를 위하여 먼저 수학교육용 소프트웨어에 관한 고찰을 하였으며 학교 수학에서 등장하는 문제해결의 과정을 규칙 재작성으로 처리함으로써 화이트박스 형태의 콘텐츠 제작에 관한 이론적 토대를 살펴보았다. 구체적으로 Mathematica의 패턴 매칭을 이용하여 미분과 적분 연산자를 구현하였고, 이를 벡터미적분에서 등장하는 매개변수화된 곡선에 대한 길이 구하기 문제에 적용함으로써 콘텐츠 개발의 예를 제시하였다. 튜토리얼 형태로 개발된 이러닝 콘텐츠는 단계별 풀이 과정이 나오는 실습하기 콘텐츠와 퀴즈 문제를 통하여 학습자의 과정을 진단해 주는 형성평가 모듈로 구성되었다. 끝으로 개발된 이러닝 콘텐츠의 특징과 이공계 대학생들의 수학에 관한 기초학력을 증진하는데 활용될 수 있는 장점을 살펴보았으며 향후 연구 방향을 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.710-715
• /
• 2016

Due to its simplicity and high reliability, the box-counting(BC) method is one of the most frequently used techniques to estimate the fractal dimensions of a binary image with a self-similarity property. The fractal calculation requires data sampling that determines the size of boxes to be sampled from the given image and directly affects the accuracy of the fractal dimension estimation. There are three non-overlapping regular grid methods: geometric-step method, arithmetic-step method and divisor-step method. These methods have some drawbacks when the image size M becomes large. This paper presents a BC algorithm for enhancing the accuracy of the fractal dimension estimation based on a new sampling method. Instead of using the geometric-step method, the new sampling method, called the coverage ratio-step method, selects the number of steps according to the coverage ratio. A set of experiments using well-known fractal images showed that the proposed method outperforms the existing BC method and the triangular BC method.

• 대한물리의학회지
• /
• 제11권1호
• /
• pp.11-21
• /
• 2016

PURPOSE: This study was examined the effects of aerobic exercise using a step box and lower extremity strengthening exercise with an elastic band on the balance ability and lower extremity muscular strength in elderly subjects. METHODS: Forty-one healthy adults were randomly divided into experimental group 1 (Exp 1, n=14), experimental group 2 (Exp 2, n=14), and a control group (n=13). The Exp 1 conducted lower limb strengthening exercise using an elastic band and the Exp 2 performed aerobic exercise with a step box 50 minutes per day, twice per week, for eight weeks. RESULTS: There was significant increase in the Exp 1 and Exp 2 in comparison of the change of lower limb muscle strength according to measurement time (p<.05). But there was no significant difference according to intervention methods. In one-leg standing test change among the three groups after the intervention, the Exp 1 and Exp 2 saw significant improvement compared to the control group (p<.05) but there was no significant difference according to intervention methods. The change of the functional reaching test results, the Exp 1 and Exp 2 saw significant improvement according to the time of measurement. In the change of the Timed Up and Go test, there was significant improvement in the Exp 1 and Exp 2 compared to the control group (p<.01), but there was no significant difference according to intervention methods. CONCLUSION: Exercise to lower extremity strengthening program accompanied with aerobic exercise is considered more effective in dynamical balance and ability to walk.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.429-434
• /
• 2017

n개의 정점들을 가지는 그래프 G=(V, E)에서 각 정점에는 마지막에 놓여야 하는 고유한 상자가 존재한다. 따라서 각 정점과 상자를 1부터 n까지의 정수로 나타내고 정점 i에 놓여야 하는 상자는 상자 i로 나타낸다. 하지만 초기에 상자들은 순열(permutation) ${\pi}$에 따라서 정점 i에 상자 ${\pi}$(i)가 놓여있다. 각 단계에서 로봇은 G의 한 에지 상을 움직일 수 있고, 어떤 순간에 많아야 하나의 상자를 운반할 수 있다. 또한 정점에 도착하면 운반 중인 상자와 정점에 놓여 있는 상자를 교환할 수 있다. 문제는 모든 정점이 자신의 상자를 받을 수 있도록, 다시 말해서, ${\pi}$에 의해 섞여진 상자를 정렬하는, 로봇의 움직임의 최소 단계 수를 찾는 것이다. 본 논문에서는 그래프 G가 사이클(cycle)인 경우에 최소 단계수의 상한 값을 찾고 이 단계 안에 정렬을 수행하는 로봇의 움직임을 $O(n^2)$ 시간에 찾는 수 있음을 보일 것이다.

• Journal of the Korean Statistical Society
• /
• 제18권2호
• /
• pp.125-134
• /
• 1989

This paper presents optimum simple step-stress accelerated life test plans for the case where the test process is observed periodically at intervals of the same length. Two types of failure data, periodically observed complete data and periodically observed censored data, are considered. An exponential life distribution with a mean that is a log-linear function of stress, and a cumulative exposure model for the effect of changing stress are assumed. For each type of data, the optimum test plan which minimizes the asymptotic variance of the maximum likelihood estimator of the mean life at a design stress is obtained and its behaviors are studied.