• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.63-72
• /
• 2006

The purpose of this raper is to address the negative impedance instability in DC/DC converters. We present the negative impedance instability of PWM DC/DC converters loaded by constant power loads (CPLs). An approach to design digital controllers for DC/DC converters Is presented. The proposed method, called Power Alignment control technique, is applied to DC/DC step-down choppers operating in continuous conduction or discontinuous conduction modes with CPLs. This approach uses two predefined state variables instead of conventional pulse width modulation (PWM) to regulate the output voltage. A comparator compares actual output voltage with the reference and then switches between the appropriate states. It needs few logic gates and comparators to be implemented thus, making it extremely simple and easy to develop using a low-cost application specific integrated circuit (ASIC) for converters with CPLs. Furthermore, stability of the proposed controllers using the small signal analysis as well as the second theorem of Lyapunov is verified. Finally, simulation and analytical results are presented to describe and verify the proposed technique.

• BMB Reports
• /
• v.39 no.3
• /
• pp.329-334
• /
• 2006

RNAi (RNA interference) has become a popular means of knocking down a specific gene in vivo. The most common approach involves the use of chemically synthesized short interfering RNAs (siRNAs), which are relatively easy and fast to use, but which are costly and have only transient effects. These limitations can be overcome by using short hairpin RNA (shRNA) expression vectors. However, current methods of generating shRNA expression vectors require either the synthesis of long (50-70 nt) costly oligonucleotides or multi-step processes. To overcome this drawback, we have developed a one-step short-oligonucleotides-based method with preparation costs of only 15% of those of the conventional methods used to obtain essentially the same DNA fragment encoding shRNA. Sequences containing 19 bases homologous to target genes were synthesized as 17- and 31-nt DNA oligonucleotides and used to construct shRNA expression vectors. Using these plasmids, we were able to effectively silence target genes. Because our method relies on the onestep ligation of short oligonucleotides, it is simple, less error-prone, and economical.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.43-50
• /
• 2024

Large planar military antenna boasts a range of electrical components, including TRA(Transmit-Receive Assembly), signal processors, etc. which engage in computations and calculations. These processes generate a significant amount of heat, leading to unforeseen consequences for the equipment. To mitigate these adverse effects, it's imperative to implement a cooling system that can effectively reduce heat-related issues. Given the antenna's intricate nature and the multitude of components it houses, a two-step estimation process is necessary. The first step involves a comprehensive model calculation to determine the total flow characteristics, while the second step entails a thermal analysis of individual TRA set. In this study, we depicted an antenna set using simplified 3D models of its components, considering their material and thermal properties. The sequential analysis process facilitated the calculation of branched flow rates, providing insights into the individual TRA. This approach also allowed us to design a cooling system for the TRA set, assessing its thermal stability in high-temperature environments. To ensure the optimal performance of TRA, breaking down the analysis into stages based on the cooling system's structure can assist operators in predicting numerical results more effectively.

• The KIPS Transactions:PartA
• /
• v.11A no.1
• /
• pp.97-108
• /
• 2004

This paper proposes to use an algorithmic debugging technique for locating logical errors in Java programs. The algorithmic debugging is a semi-automated debugging technique that builds an execution tree from a source program and locates logical errors, if any, included in the program from the execution tree with top-down method. So, it is very important to build a suitable execution tree from the various programming languages. In this paper we propose the method for building an execution tree iron Java programs and walk through an example. This approach could reduce the number of interactions between a user and a debugging system than the traditional step-wise debugging technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.114-114
• /
• 2020

Water contamination in a water distribution network (WDN) is harmful since it directly induces the consumer's health problem and suspends water service in a wide area. Actions need to be taken rapidly to countermeasure a contamination event. A contaminant source ident ification (CSI) is an important initial step to mitigate the harmful event. Here, a CSI approach focused on determining the contaminant intrusion possible location and time (PLoT) is introduced. One of the methods to discover the PLoT is an inverse calculation to connect all the paths leading to the report specification of a sensor. A filtering procedure is then applied to narrow down the PLoT using the results from individual sensors. First, we spatially reduce the suspect intrusion points by locating the highly suspicious nodes that have similar intrusion time. Then, we narrow the possible intrusion time by matching the suspicious intrusion time to the reported information. Finally, a likelihood-score is estimated for each suspect. Another important aspect that needs to be considered in CSI is that there are inherent uncertainties, such as the variations in user demand and inaccuracy of sensor data. The uncertainties can lead to overlooking the real intrusion point and time. To reflect the uncertainties in the CSI process, the Monte-Carlo Simulation (MCS) is conducted to explore the ranges of PLoT. By analyzing all the accumulated scores through the random sets, a spread of contaminant intrusion PLoT can then be identified in the network.

• Nutrition Research and Practice
• /
• v.3 no.3
• /
• pp.226-233
• /
• 2009

Traditional nutrition education has not been shown to consistently produce behavior change. While it has been suggested that using emotion-based messages may be a better way to influence nutrition behavior change, this has not been well tested. Producing emotion-based messages is a multi-step process that begins with exploring subconscious barriers to behavior change rather than the more obvious and typically reported barriers. The purpose of this research was to uncover the emotional reasons, sometimes referred to as emotional pulse points, for mothers' choosing or not choosing to have more family meals. This would then serve as the first step to developing emotion-based messages promoting the benefits of family meals. Five focus group interviews were conducted with 51 low-income Black (n=28) and white (n=23) mothers. Metaphorical techniques were used to determine underlying feelings toward family and family meals. Discussions were video-taped, transcribed, and manually analyzed using a content-driven, immersion/crystallization approach to qualitative data analysis. Four themes emerged around the definition of family: acceptance, sharing, chaos, and protective/loyal. Some mothers felt mealtime was merely obligatory, and described it as stressful. Some reported a preference for attending to their own needs instead of sitting down with their children, while others felt that mealtime should be used to interact with and educate children and felt guilty when they were not able to provide family meals. Three themes emerged around feelings towards having or not having family meals: unimportant, important, and guilty. When explored further, mothers indicated that using the feeling of guilt to encourage family meals might be effective. Data obtained are being used to develop innovative, emotion-based messages that will be tested for effectiveness in promoting family meals.

• Journal of architectural history
• /
• v.16 no.2
• /
• pp.79-98
• /
• 2007

The building site was presumed as the Howonjeokwon or the Dasiwonji established at the traffic route among western inland areas in old Pyeonghaegun. The groundwork was composed inclination terrace of two steps. The upper step was the territory of the main house of ceremony symbolic+lodging function and the down step was divided in the territory of both Ikrang-chae of boarding and lodging management function and the territory of Haengrang-chae pavilion of rest reception management. The building composition by each territory formed space differentiation with the line of flow according to the thorough rule of court rank. The arrangement composition set the strong center axis in tandem, and it was the building arrangement interpreting the territory and the rule of court rank by function as the relationship of master and servant and was the building type emphasizing on the whole unity with the geometric symmetry structure. The Dasiwonji and the Hyeeumwonji had the common point which is the traffic architecture of semi governmental management reinforcing the boarding lodging function in the place which a visitor stayed. The Haeeumwonji and Dasiwonji had the difference in the size, but was the same in the composition system of construction. The external space and the system of the line of flow decided from the functional territory separation and the hierarchical rank as thorough as the geometric arrangement focusing on the whole unity. Namely, it was the strict and unusual system of the line of flow depended on the thorough rule of court rank than the efficient approach or arrangement of the line of flow. After being established to be the Howonjeokwon at the end of Koryeo, it disappeared at the time of the invasion of Japanese pirates when it was the time of the King Woo in Koryeo. It is presumed that it was continued until both wars, Imjin Byeongja, ago after changing its name to the Dasiwon, being restored to the small size at the end of Koryeo at the early of Choseon.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.301-317
• /
• 2005

The number of patients with tongue carcinoma is increasing rapidly among young individuals in many parts of the world. Oral carcinoma progresses from hyperplastic lesion through dysplasia to invasive carcinoma and the concept of "field cancerization" with molecular alteration has been suggested for oral cavity carcinogenesis. Significant improvement in treatment and prognosis will depend on more detailed understanding of the multi-step process leading to cancer development. To induce tongue carcinoma in rat by 4-NQO, each drinking water was made to 10 ppm, 25 ppm, 50 ppm and control (only D.W. without 4-NQO). Specimens were classified into 4 groups such as control, I (mild & moderate dysplasia), II (severe dysplasia and carcinoma in situ), III (carcinoma). The mRNA expressions of Bcl-2 family were evaluated by RT-PCR technique. For anti-apoptotic Bcl-2 family, mRNA expression of Bcl-w was down-regulated in all stages of tongue carcinogenesis model. However, mRNA expression of Bcl-2 was up-regulated. For pro-apoptotic Bcl-2 family, all members were down-regulated in all stages of tongue carcinogenesis model except for Bad mRNA in group III. In terms of BH3 only protein, mRNA expressions of Bok and Mcl-1 were down regulated in all stages of specimen, but Bmf in group II and BBC3 in group III were up-regulated. Our current findings demonstrated the involvements of mRNA expression of Bcl-2 family in multi-step tongue carcinogensis. This highlights the necessity for continued efforts to discover suitable biomakers (Bcl-2 family) for early diagnosis of the disease, and to understand its pathogenesis as a first step in improving methods of treatment. The discovery of these potential biomarkers and molecular targets for cancer diagnostics and therapeutics has the potential to significantly change the clinical approach and outcome of the disease.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.2
• /
• pp.87-95
• /
• 2008

Background: Hemiplegic patients usually have difficulty maintaining balance. Balance training is a major component of there habilitation program for patients with neurological impairment. The purpose of this study was to investigate the effects of PLS(Posterior Leaf Spring), FES(Functional Electrical stimulation), treadmill training, and neurodevelopmental treatment on the improvement of balance in patients with hemiplegia. Methods: We looked into published studies from Dankook University’s electronic library databases of RISS4U, KMbase, NCBI, and MEDLIS concerning the effectiveness of any form of intervention leading to improvement of balance. All types of studies relevant to the topic that were published in English during the time period of 1986 to 2005 were included. Results: 1. There were significant differences in standing balance, dynamic activity balance, and gait speed between barefoot subjects and subjects who wore SPAFO and HPAFO(p<.05). 2. The changes in ROM and FRT related to sex, age, height, and weight part of the diagnosis, as well as experience relapse, was of meaningless value. Changes in ROM related to the duration of pain and experiences of falling down were also meaningless. However, FRT showed significant static differences(p<.05). 3. The body-weight-support treadmill training scoring of standing balance, step length, and a timed 10m walking test showed definite improvement. 4. The proprioceptive control approach improved dynamic balance in patients with hemiplegia. Conclusion: Consequently, further study is needed to verify methods when physical therapists are researching balance ability in hemiplegic patient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.15-25
• /
• 1993

In order to promote the efficient use of composite materials, effort is currently being directed at the development of design criteria for composite structures. Insofar as design against buckling is concerned, it is well known that, for metal shells, a key step is the definition of 'knockdown' factors on the elastic critical buckling stress accounting mainly for the influence of initial geometric imperfections. At present, the imperfection sensitivity of composite shells has not been explored in detail. Due to the large number of parameters influencing buckling response (considerably larger than for isotropic shells), a very large number of tests would be needed to quantify imperfection sensitivity experimentally. An alternative approach is to use validated numerical models for this task. Thus, the objective of this paper is to outline the underlying theory used in developing a composite shell element and to present results from a validation exercise and subsequently from a parametric study on axially loaded glass fibre-reinforced plastic (GFRP) curved panels using finite element modelling. Both eigenvalue and incremental analyses are performed, the latter including the effect of initial geometric imperfection shape and amplitude, and the results are used to estimate 'knockdown' factors for such panels.