• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.75-82
• /
• 1999

This study was carried out to examine the effect of day/nignt temperatures during seedling culture on the vegetative and reproductive growth of Lycopersicum esculentum ‘Seokwang’. The study was consisted of two culture stages, plug seedling production in the growth chamber and hydroponic culture of the plant in a glasshouse. Experiments were replicated over time. The germinated seedlings were raised for 33 days (experiment 1) and 35 days (experiment 2) in 4 growth chambers, each with day/night temperatures of either $25^{\circ}C$/$25^{\circ}C$, 16$^{\circ}C$/16$^{\circ}C$, 16$^{\circ}C$/$25^{\circ}C$ or $25^{\circ}C$/16$^{\circ}C$. Cool-white fluorescent lamps provided 140$\mu$mol.m$^{-2}$ .s$^{-1}$ light for 12h each day. In the second experiment, all chambers were supplied with 1000$\mu$mol.mol$^{-1}$ CO$_{2}$ during the photoperiod and had an air velocity of 0.3m.s$^{-1}$ and relative humidity of 80%. Plug seedlings raised were transplanted to rockwool slabs in a glasshouse and were grown hydroponically using the same nutrient solutions used for seedling culture for 37 days (experiment 1) and 35 days (experiment 2). Plant height was affected more by mean daily temperature than by interaction of day and night temperatures. Plant height was the highest in 16/16$^{\circ}C$ treatment. Leaf count was not affected by day and night temperatures, and the chlorophyll concentration was the highest in 16/$25^{\circ}C$ treatment. Fresh and dry weights of stem tended to be greater in treatments of constant day and night temperature. The number of node on which first and second flower clusters were set was significantly higher in 25/$25^{\circ}C$ treatment than in the other treatments. Days to flower of the first flower on the first flower cluster were the greatest in 25/$25^{\circ}C$ and the least in 16/$25^{\circ}C$ treatment. Vegetative and reproductive growth, such as height, fresh and dry weights, days to flower, and nodes of the 1st and 2nd flower cluster set were affected by day/night temperatures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.62-72
• /
• 1985

In order to find out the effects of seeding time on growth, dry matter production and nutritive content of Pioneer 931, Pioneer 988 and Piper, this study was carried out on the experimental field of Livestock Experiment Station in 1981-83. Seeding time were 7 with 14-day interval from April 16 to July 9. The results are summarized as follows: 1. It tool about 12 to 13 days from seeding to emergence in case of Mid-April seeding and 7 to 8 days in Late-June. Earlier seeding, more longer growth period from emergence to heading they required. 2. Plant height of Pioneer 931 seeded lately was longer than 4.5 meters in primary growth and Sudangrass was about 2.0 to 2.5 meters. Leaf area was the greatest in Mid-August by early seeding but it was increased until Early-October by late seeding. 3. Sorghum gas brought the highest yield in dry mater and Sudangrass the lowest. In general dry matter yield reduced gradually in response to later seeding but Pioneer 931 has brought more than 10 tons per hecter until Late-June. 4. Relative Growth Rate, Leaf Area Ratio and Leaf Weight of all varieties decreased in accordance with growth development. 5. Crude protein content of leaf was higher than stem and the younger the plants, the more protein they contain. Nitrogen Free Extract was just opposite to crude protein.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.73-77
• /
• 2016

In this study, we examined the changes of fruit number and fruit weight according to the length of bearing branch of Actinidia arguta and identified the correlation the length of bearing branch and fruit characteristics. The fruit weight and the fruit number of A. arguta bearing branch which length are below 15 cm and over 30 cm were 11.7 g, 4.3 and 12.3 g, 13.8, respectively. From the results, the bearing brach which length was below 15 cm must be removed in winter season pruning. The pruning experiment was conducted to examine the effects on fruit quality and yield of A. arguta. Total fruit yield of heavy-pruning was $14.3{\pm}1.5kg/tree$. The production of fruits over 15 g wight was $8.2{\pm}0.9kg/tree$, that of fruits between 10 g to 15 g was $4.0{\pm}0.7kg/tree$, and that of fruit below 10 g was $2.1{\pm}0.3kg/tree$, respectively. Average fruit yield of nonpruning was $26.7{\pm}2.1kg/tree$, fruit yield over 15 g, between 10 g and 15 g, and below 10 g were $2.5{\pm}0.5kg/tree$, $19.2{\pm}1.4kg/tree$, and $5.0{\pm}0.6kg/tree$, respectively. Distribution of high quality fruit (over 15 g) showed that non-pruning was almost 15~16 g but pruning was evenly distributed between 15 g and 20 g. According to the survey, The high quality fruit (over 15 g) would not be harvested if the winter pruning is not applied in the A. arguta cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.152-161
• /
• 1985

To examine the effects of different levels of soil moisture on dry matter production and chemical compositions of sorghum cv. Pioneer 931, sorghum-sudangrass hybrid cv. Pioneer 988, sudangrass cv. Piper, and corn cv. Suweon 19. Soil moisture contents were maintained with approximately 100, 80 and 40% of field moisture capacity. The results are summarized as follows; 1. The highest dry matter yields per plant were found at 60% soil moisture level with 176.2g, 180.8g and 164.0g for pioneer 931, Pioneer 988 and corn, respectively. 2. Dry matter accumulation in accordance with soil moisture levels and growth stages of all crops except sudangrass were in the order of 60>40>80>100% soil moisture level. 3. The highest absolute growth rate (AGR) of sorghum, sorghum-sudangrass hybrid and corn was shown at 60% soil moisture level, that of sudangrass was shown at 80% soil moisture level. The relative growth rate (RGR) of all crops was high in the early growing stage and was low at maturity. The highest net assimilation rate (NAR) of all crops was found at 60% soil moisture level with $72-467g/m^2/day$ from June 29 to July 5. 4. The higher crude fiber content in leaf of Pioneer 931 was shown at 100% and 80% soil moisture levels with 28.6-28.8%, that of corn had no significant difference among soil moisture levels. The crude protein content in leaf of all crops was 14.2-21.6% at 60% soil moisture level, 13.8-16.0% at 40% soil moisture level, and 7.3-13.9% at above 80% soil moisture levels, respectively. 5. The crude fiber content in stern of all crops and all soil moisture levels was 24.6-36.7%, and the crude protein content in stem was 2.5-5.3% in dry matter basis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2009

Approximately 43 million tons of livestock manure (LM) are produced each year on Korean farms. LM can be utilized as a valuable resource and/or it can contaminate water by runoff and leaching through the soil, when LM has been thoughtlessly applied to the land and directly discharged into the water. This experiment was carried out to investigate the effect of no-till system and LM application on dry matter (DM) yield of silage corn and $NO_3$-N concentration in leaching water of lysimeter installed in the experimental field. The treatments were replicated three times in split plot design. Main plots consisted of tillage systems, such as conventional tillage (CT) and no-tillage (NT). Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). The control plots were fertilized as commercial chemical fertilizer. DM yields of corn increased significantly in order to CF > CCM > CSM (p<0.05). DM yield of corn in CT increased as comparing with that of corn in NT. Plant height, ear height and stem diameter also increased in order to CF > CCM > CSM. In addition, the root weight in CT was increased as comparing with that of corn in NT. However, there was no interaction effects of between type of LM and tillage system. $NO_3$-N concentration in leaching water of LM application was less than 10 ppm, but $NO_3$-N concentration in CF exceeded 10 ppm which is safety level of drinking water during summer time (rainfall season).

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2017

This experiment was conducted to analyze the effect of drainage reuse rate on the growth and fruiting of summer paprika in closed hydroponic cultivation. The experiment was carried out for 25 weeks from March to September 2015 with 0, 20, 30, 50% mixing ratio of waste nutrient solution using non - recycling hydroponic cultivation as a control. As a result, stem diameter of the test was different in the groups 1 and 2, but no difference showed as the group progressed more than 3 groups. L.A.I tended to decrease with increasing drainage mixing ratio. The number of nodes in the 50% reuse test group was 1.4 compared to the control group, but there was no significant difference. The number of harvested nodes was significantly different in the control group (11.1 nodes) and the 50% reuse test group (8.7 nodes), and the harvested nodes tended to decrease as the drainage was reused. The ratio of harvest was also the same as that of the harvesting node, and the control was the highest at 33.2% and the lowest at the 50% reuse test at 27.6%. Relative yields were reduced by 30%, 35% and 45% in the control group in the first group, and this tendency was also observed in the second and fourth groups. However, in the 3 and 5 groups, the production of 50% test group increased by 13% and 5%. The ratio of unmarketable fruit was increased 2%, 4%, 4%, and 7% in 0%, 20%, 30% and 50% reuse test, respectively. In conclusion, if the decrease in yield due to the decline in early growth is carefully managed, even if the imbalance of inorganic ions occurs after the mid-term growth, the growth of the crop will enter into a stable period and the re-use will not be worried about the growth and the yield decrease.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.334-342
• /
• 2016

In order to evaluate the modified installation methods of roof ventilation devices, derived from the previous experiment ('investigation into the optimum capacity of roof ventilation devices and their deployment'), the conventional and modified (improved) roof ventilation systems were installed in the single-span plastic greenhouse for growing oriental melons. The roof vents ($60{\varphi}$) and roof fans (maximum air capacity of $38m^3/min$) were installed in the spacing of 15m (FT, modified 'side vent+roof fan' ventilation) and 6m (TT, modified 'side vent+roof vent' ventilation) respectively on the roof of greenhouses for the modified roof ventilation treatments, and 20m (FC, conventional 'side vent+roof fan' ventilation) and 8m (TC, conventional 'side vent+roof vent' ventilation) for the conventional ones. The stem diameter, leaf blade lengh, petiole length, and leaf width were lower in the FT and TT treatments than those in the conventional treatments, FC and TC. Although the fruit weight and total yields were slightly lower in the FT and TT treatments, the marketable fruit ratio (%) were higher, as a result of increased fruiting ratio (%) in these treatments, than those of FC and TC. The marketable yields (kg/10a) in the FT and TT treatments were 8,391 kg/10a and 7,283 kg/10a, which were respectively 661 kg/10a and 487 kg/10a higher than those in the treatments of FC and TC. The modified installation methods of roof fan resulted in production of more female flowers and lower fruit drop ratio (%) compared to conventional meathods. In the treatment of the conventional ventilation with roof vent, the fruit weight, fruit length & width, and flesh thickness were higher than in other treatments, but there were no significant differences in the fruit width and flesh thickness among the treatments.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.191-195
• /
• 2011

This experiment was attempted to investigate a cause of the scion death in green pepper grafting system. A tobamovirus particle examined in the rootstock of the sample but not in the scion showing necrosis. The virus isolated from the rootstock was identified as Pepper mild mottle virus (PMMoV), pepper tobamovirus pathotype P1.2. (PMMoV-2), by nucleotide sequence analysis and host plant reaction. The virus isolate infected systematically in 6 commercial rootstock varieties using for green pepper grafting seedling production. Green pepper varieties 'Long green mart' and 'Daechan' represented resistance to the virus showing local lesions only on the inoculated leaves and 'Manitda' was systematically infected. In the experiment with grafting 'Long green mart' or 'Daechan' onto the those rootstocks, the upper leaves of the scions first showed vein necrosis and wilt symptoms 7 days after inoculation with PMMoV-2 on the cotyledon of the rootstock, following to the scion stem necrosis and then only the scion death. The virus was detected in the rootstock but not in the scion. However, 'Manitda' of susceptible variety in the grafting system showed mottle symptom on the leaves of the scion but not necrosis on the plant. PMMoV-3 isolate, pepper tobamovirus pathotype P1.2.3, did not cause the scion death in the grafting system. All of the varieties were susceptible to PMMoV-3. These results suggest that the scion death is caused by infecting with pepper tobamovirus pathotype P1.2. in the green pepper grafting system combined with the susceptible rootstock and the resistance scion to the virus pathotype.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.49-61
• /
• 1962

The insect Diplosis mori Yokoyama is causing extensive destruction of mulberry trees in Korea with a resultant loss in silk production. This study was made to determine an effective method of control. Methods and Materials Used Preliminary studies were made to determine more exactly the life cycle of the insect. Based on this information, various control measures were tested, including the use of spray methods with BHC and control of larvae by tilling. Results Obtained 1. Life cycle studies (a) In the Suwon area, this-insect has 5 generations per year. The first starts in the later part of June and the final cycle ends in the later part of September. (b) The adult insects appear about 7: 00-8: 00 P.M. and live for 2-5 days. Females live in longer periods than the male. (c) Larvae lives inside the second and third stipules (A. B.) before mulberry leaf development. They cause extensive damage to the leaves at the point where they are attached to the stem. (d) Weather conditions considerably affect the life cycle. The pupa particularly are affected and not be able to change into the moth stage when there is a long period of no rain. (e) Larvae are large......0.3 to 2.0mm......and are milky-white immediately after hatching but turn to pinkish as the worm matures. The matured worm has a jumping ability up to 15-20cm. The worm burrows into the ground 1.5 to 3.0 cm before changing into the pupal stage. (f) The pupal stage usually lasts 7-8 days, in summer weather conditions and the pupa is surrounded with a coarse cocoon. (g) These insects, as a general rule, overwinter as pupae but sometimes as larvae. 2. Control measures (a) BHC dust applied on the ground seem most effective. It should be done 4-5 days after the worm has burrowed into the ground. For this control, it is recommended that 6kg of a 2% formation Tanbo(l0ares) be used. (b) For the effective spraying against the fly, it is recommended that a formulation of liquid BHC spray terials be used at the rate of 400-600 liters per Tanbo. (c) Tillage methods which provide a cover of soil 5cm or more in depth above infested areas will effect-maively prevent the emergence of the fly from the pupal stage. 3. Conclusions Methods of control against Diplosis mori Yokoyama can be tied more closely to the life cycle of the insect with more effective results. Further studies are needed to complete information on possible controls during or after hibernation. Economic studies on the cost of these control measures are also needed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.79-87
• /
• 1978

This is an experimental study on friction welding and heat treatment of engine exhaust valve materials whose welding combination is SCr4 as stem to 21-4N as head and SUH3 to 21-4N. In this study, not only the experiments of friction welding under the selected optimum welding condition and the examination of the mechanical properties were carried out, but also the heat treatment of friction welded specimens under the two selected conditions was taken to obtain the better welding character, eliminating the latent stress and the hardness peak which appeared at the welded zones of heat resisting steel(21-4N, SUH3) and low alloyed steel ($SCr_4$) friction weldments. The results obtained by the experiments and consideration in this study are as follows: I) It was experimentally proved quite reasonable that 'speed=3,OOO rpm, heating pressure Pl=8 kg/ mm2, upsetting pressure p, = 20 kg/mm', heating time $t_1$ = 3 see, upsetting time TEX>$t_2$ = 2.5 sec' was selected as the optimum welding condition for friction-welding the engine exhaust valve materials $SCr_4$ to 21-4 Nand SUH 3 to 21-4 N. 2) The results of the previous study and this one on friction welding of such dissimilar materials as SUH 3-SUH 31, SCr 4-SUH 31, SCr 4-SUH 3, SUH 3-CRK 22, SCr4-21-4 Nand SUH3-21-4 N agreed with each other substantially in the friction welding characteristics at welded interface zones. 3) It was also certified quite satisfactory that '600\ulcornerCX30 min. Xroom air cooling' as an optimum heat treatment condition of the friction welded materials SCr 4-21-4 Nand SUH 3-21-4 N was experimentally determined to eliminate the latent stress and the hardness peak at welded zones. 4) About 20% of the tensile strength before heat treatment of friction welded specimens was decreased after heat treatment 600\ulcornerCX30 min. Xair cooling, but the location of fracture was moved from heat affected zone to parent $SCr_4$ & SUH3. 5) Microscopic examination of the weld joints friction-welded and heat-treated under the above mentioned conditions revealed that the weld zone is very narrow and has a fine grained intermixed structure without any welding defects. 6) The above mentioned conditions can be also utilized as friction welding parameters of the other dissimiar materials for engine valve production.