• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.61-64
• /
• 2013

Biomass is well known for organic resources photosynthesized by carbon dioxide water in the air and thus it can be widely used in the form of energy and production for various kinds of materials. Through pyrolysis, biomass can be transformed into solid(biochar), liquid(bio-oil), and combustible gas on the different condition of temperature and heating rate. That's why biomass can be practically used to preprocess and produce a variety of elements. This work is to analyze the characteristics of slow pyrolysis of three different kinds of biomass extracted from Indonesia. They showed similar moisture content and combinations of combustible matters and had quite a large discrepancy in the ash among them like 2.1 & of Bagasse, 91% of PKS, and 20.9% of Paddy Straw, respectively. yield of biochar, solid form of the biomass, steadily decreased when the temperature went up and that of bio-oil the highest at the temperature of 500 degrees Celsius. At the same temperature range, PKS bio-oil showed 51.4 % of yield and Bagasse had 55.1% while it turned out that Paddy straw showed the lowest yield of 37.2%. The apparent density was also measured to figure out the density of each product from the pyrolysis experiments at the temperature of 500 degrees Celsius. The result was like these; the density of biochar was 0.17, the lowest, and that of Tree stem was 1.3 when mixed by an equal amount of biochar and bio-oil.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.49-58
• /
• 1992

The purpose of the experiment was to determine the effect of plant density and pattern on growth characteristics, total dry matter yield. protein yield and palatability of sorghum-sudangrass hybrid (Sordan 79). The main treatment was three levels of plant density (Skg, 15kg. 30kg/ha) and the sub treatment was two plant patterns of square and rectangular planting.The experiment was arranged as a split plot design and conducted on the Experimental Livestock Farm of Kon-Kuk Univ. in Chungju, 1989. The results obtained are summarized as follows :1. As the plant density was increased, plant length, leaf length, leaf width(P<0.05) and leaf number were gradually decreased, but in the same plant density, plant length, leaf length, leaf width and leaf number were generally increased in the rectangular plot. 2. In the first cutting time, the ratio of leaf was the highest at the rectangular plot of high density (30kg/ha, 25cm$\times$4cm), but in the second cutting time, the ratio of leaf was the highest at the square plot of medium density (15kg/ha, 14cm$\times$ 14cm). 3. The ratio of dead stubble after cutting was generally increased by increasing the plant density. Also, in the same planting density, the ratio of dead stubble was generally increased in the square plot. 4. The tiller number per plant tended to decreased by increasing thc plant density, and the tiller number was increased in the rectangular plot. In the same plant density. 5. Total fresh and dry matter yield were the highest at the rectangular plot of medium density (IS kg/ha, 33cm$\times$6cm) wholly, but the low density was shown the lowest.6. The crude protein content was increased by increasing the plant density per unit area(P<0.05) and the protein yield was also increased by increasing the planting density. 7. According to the increase of plant density, the stem was thinned, but NDF, ADF did not show different. The palatability was in the order of high (30kg/ha))medium (15kg/ha))low density(5kgiha) at the first cutting time, but it was in the order of high)low)medium density at the second cutting time.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.19.2-19.2
• /
• 1992

The purpose of the experiment was to determine the effect of plant density and pattern on growthcharacteristics, total dry matter yield. protein yield and palatability of sorghum-sudangrass hybrid(Sordan 79). The main treatment was three levels of plant density (Skg, 15kg. 30kg/ha) and the subtreatment was two plant patterns of square and rectangular planting.The experiment was arranged as a split plot design and conducted on the Experimental Livestock Farm of Kon-Kuk Univ. in Chungju, 1989.The results obtained are summarized as follows :1. As the plant density was increased, plant length, leaf length, leaf width(P<0.05) and leaf number were gradually decreased, but in the same plant density, plant length, leaf length, leaf width and leaf number were generally increased in the rectangular plot.2. In the first cutting time, the ratio of leaf was the highest at the rectangular plot of high density(30kg/ha, 25cm$\times$4cm), but in the second cutting time, the ratio of leaf was the highest at the square plot of medium density (15kg/ha, 14cm$\times$ 14cm). 3. The ratio of dead stubble after cutting was generally increased by increasing the plant density. Also, in the same planting density, the ratio of dead stubble was generally increased in the square plot. 4. The tiller number per plant tended to decreased by increasing thc plant density, and the tiller number was increased in the rectangular plot. In the same plant density. 5. Total fresh and dry matter yield were the highest at the rectangular plot of medium density (ISkg/ha, 33cm$\times$6cm) wholly, but the low density was shown the lowest.6. The crude protein content was increased by increasing the plant density per unit area(P<0.05) and the protein yield was also increased by increasing the planting density. 7. According to the increase of plant density, the stem was thinned, but NDF, ADF did not show different. The palatability was in the order of high (30kg/ha))medium (15kg/ha))low density(5kgiha)at the first cutting time, but it was in the order of high)low)medium density at the second cutting time.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.475-478
• /
• 2001

Ex vivo hematopoietic cells can treat patients suffering from hematopoietic malignancies using bone marrow transplantation therapies. A initial cell density of $1.5{\times}10^6cells/ml$ and a growth factors of IL-3(5ng/ml), SCF(5ng/ml) and FL(25ng/ml) result in a 3.6-fold expansion of LTC- IC but a unexpansion of total cells.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.424-428
• /
• 1997

This study was carried out to investigate the effects of sowing dates, Apr. 25, May 15, June 5 and June 25, on sex ratio, growth and seed yield of "Chonnam species", local variety of hemp plant. The results were following as. : In sex ratio according to the different seeding dates, the revealating rate of female and male plants were highest on June 25, and Apr. 25, respectively. The length of stem, the number of branches, nodes, and seed yield were increased on May 15, but these charateristics were rapidly reduced on June 25 because of short growing period. Yield of seeds was increased by 24％ on May 15 comparing with 1.30ton /ha on Apr. 25.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.321-324
• /
• 2008

Forest fire danger rate of thinning area was lower than that of non thinning area, because height rate of leewardside in burned stem of tree, damage rate of crown and mortality of tree in thinning area were 30.8%, 37% and 48.4% lower than that in non-thinning area, respectively. Intensity of forest fire varied depending upon topographical condition up slope, down slope, aspect, location as well as species, breast height diameter and forest tree density. Especially, a mountaintop area was burned down when forest fire was spread to up slope ridge of mountain.

• Elastomers and Composites
• /
• v.25 no.3
• /
• pp.203-210
• /
• 1990

The structure and properties of blends of ethylene-propylene-diene terpolymer(EPDM) and polyolefin blends have been investigated. The rheology and tensile properties of the EPDM/HDPE(high density polyethylene), EPDM/PP(polypropylene) binary and EPDM/PP/HDPE ternary blends were studied along with morphological analyses. Those properties were affected by preferential interaction of EPDM on HDPE, compared to that of EPDM on PP, for the binary blends. The preferetial interaction may stem from the molecular characteristics of EPDM to possess more ethylene units than propylene units in the elastomer. The EPDM played a role as compatibilizer for HDPE and PP in the EPDM/PP/HDPE ternary blends.

• Korean Journal of Plant Resources
• /
• v.29 no.4
• /
• pp.511-518
• /
• 2016

The subject of this experiment is to supply basic data to inhibit non-productive tillers which are uneconomical for mechanical harvesting and to evaluate optimum planting density and sowing date in central district. Total number of tillers and effective first and second of tillers according to different planting density was higher in 80 ㎝ ridge than 60 ㎝ ridge in proso millet. The wider between plant distance on the ridge, the more increased total number of tillers and effective first and second of tillers. The highest effective tillers (91.7 %) in the first tillers was obtained from the second sowing date (23 May) among different sowing date and next is in the order of 3^rd(13 June, 89.8%) > 1^st(2 May, 85.6%) > 4^th(4 July, 85.2%). The percentage of effective tillers in the second tillers was decreased in the order of 2 May (53.7%), 23 May (40.7%), 13 June (22.2%), 4 July (0%) as the sowing date was delayed. There was no significant difference in days to heading and days to ripening according to different planting density. Although culm length was increased as planting density was increased, whereas number of tillers, stem diameter, ear length, grains per ear and 1000 grain weight was decreased. In the growth and yield characteristics of proso millet according to different sowing date, days to heading and days to ripening, culm length, stem diameter, ear length, grains per ear and yield per 10a were decreased. After the sowing date of 13 June, the reduction of growth and yield characteristics were higher because of excess-moisture injury.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.257-265
• /
• 2015

This experiment was carried out to determine the optimum planting density for rice pot seedling cultivation in wheat-rice double cropping system in Honam plain area. A mid-late maturing rice variety 'Chinnong' was raised in pot seedling tray and conventional tray for 30 days, and then transplanted on June 25 in 2012 and 2013. Four different planting densities (15.2, 18.9, 21.6, and 25.3 hills per $m^2$) in pot seedlings were applied as treatment. Conventional tray seedling was implicated as control at a single planting density of 27.8 hills per $m^2$. In this experiment, the number of effective tillers was increased as planting density increasing, but stem diameter was decreased. Pot seedling showed higher stem diameter and effective tillers than the control. Heading dates of pot seedling plots were not significantly different between the planting densities but 2 days faster than the control. Culm length, number of panicles, panicle length, and ripening grain ratio were higher in pot seedling compared to the control, but 1000-grain weight showed no significant difference. Milled rice yields in pot seedlings ranged from 5.19 to $5.43\;t\;ha^{-1}$, and the highest yield was observed in 21.6 hills per $m^2$. Head rice ratios in pot seedlings and the controls were not significantly different. Above results on planting density of rice pot seedling cultivation would be applicable to wheat-rice double cropping and also to late transplanting cultivation of rice single cropping.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.3
• /
• pp.198-206
• /
• 2015

This study was conducted to investigate the effects of sowing density, number of seeds sown per hole, and thinning treatment on growth characteristics and disease occurrence in Panax ginseng under direct sowing cultivation in a blue plastic greenhouse. Seedling were grown from 2 or 3 seeds sown, and the healthiest was only retained, while the rest were thinned out at the foliation stage. $NO_3$-N, $P_2O_5$, and organic matter content differed significantly between growth conditions in the plastic greenhouse and in conventional shade in the soil. Disease also tended to be higher in the conventional shade than in the plastic greenhouse. Plant height and stem length showed an increasing trend with increasing sowing density and number of seeds sown per hole. However, these measures noticeably decreased when thinning treatment was conducted. Growth of the subterranean part of ginseng was not markedly influenced by sowing density, the number of seeds sown per hole, or thinning treatment. Root weight, which is an important factor in yield, was significantly affected by the number of seeds sown and thinning treatment. Interestingly, root weight tended to be higher in the thinning treatment plot than the untreated control plot. Damping-off and root rot increased noticeably as the number of seeds sown increased. Disease also tended to be substantially higher in the thinning treatment plot than the untreated control. However, physiological disorder of the plants did not vary with sowing density, the number of seeds sown, or thinning treatment.