• 한국안전학회지
• /
• 제31권2호
• /
• pp.83-89
• /
• 2016

As the world's industrial development quickens, the highways and regional expressways have been expanding to serve the logistics and transportation needs of people. The burgeoning road construction has led to a growing interest in roadside installations. These must have reliable performance over long periods, reduced maintenance and high durability. Steel roadside barriers are prone to corrosion and other compromises to their functionality. Therefore, using high anti-corrosion steel material is now seen as a viable solution to this problem. Thus, the objective of this paper is to expand the scope of applications for high anti-corrosion steel material for roadside barriers. This paper assesses the impact safety such as structural performance, occupant protection performance and post-impact vehicular response performance by a simulation review on roadside barriers built with high strength anti-corrosion steel materials named as hot-dip zinc-aluminium-magnesium alloy-coated steel. The simulation test results for the roadside barriers built with high strength anti-corrosion steels with reduced sectional thickness meet the safety evaluation criteria, hence the proposed roadside barrier made by high strength and high anti-corrosion hot-dip zinc-aluminium-magnesium alloy-coated steel will be a good solution to serve safe impact performance as well as save maintenance cost.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.113-124
• /
• 2012

PURPOSES : In This study two different concrete barrier systems have been proposed to be established at the small vehicle driveway. One is for median barrier, and the other is for roadside barrier. METHODS : In order to determine the suitable shape of barrier, the impact parameters including vehicle weight, impact angle, impact velocity and impact level have been analyzed. The real crash test has been carried out with 0.9 ton and 2.5 ton vehicles, respectively by using the 2m segment type concrete barriers connected by steel plates that are totally 40m barrier systems. RESULTS : The numerical results obtained by LS/DYNA-3D software are compared with real crash tests from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS : From the above results, the dynamic performance of proposed barrier systems satisfies the specification of Korean Code for roadside safety structures.

• 한국해안해양공학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2004

본 연구에서는 원전어항에서 채용하고 있는 강제 부방파제에 비해 소요재료량의 변화가 크지 않은 범위에서 전후연직판의 위치와 형식의 변화 및 수평판의 부착 유무에 따른 여러 형식의 부방파제에 의한 투과율과 반사율을 Green 함수법으로부터 계산한 결과에 기초하여, 원전어항의 강제 부방파제보다 단주기파 및 장주기파를 보다 효과적으로 제어할 수 있는 새로운 형식의 부방파제를 검토하였다. 이로부터 연직커튼판 하부에 수평판을 부착한 형태의 부방파제가 파랑제어기능이 우수한 것으로 판명되었고, 이는 원전어항 부방파제보다 파랑제어기능이 탁월하다는 것을 알 수 있었다. 또한, 본체에 부착된 전후연직판 및 수평판의 크기와 간격을 조절함으로써 적합한 투과파를 얻을 수 있다는 것도 알 수 있었다.

• 한국지반신소재학회논문집
• /
• 제5권2호
• /
• pp.23-30
• /
• 2006

본 연구는 환경진동으로 유발되는 진동 대책 중 전파 경로상에 방진구나 방진벽 등과 같은 진동차단벽을 설치했을 경우 차단벽의 재료를 방진구, 콘크리트, EPS, 철로 변화시켜 유한요소해석을 수행하여 진동을 가장 효율적으로 저감시킬 수 있는 재료 및 차단벽의 규모(타설심도, 차단벽두께, 진원으로부터의 거리)에 대하여 연구하였다. 본 연구 결과 방진구의 경우는 차단벽의 두께의 영향보다는 차단벽의 타설심도에 영향이 크고, 콘크리트의 경우에는 다른 방진벽의 방진효과에 비해 방진효과가 떨어진다. 또한 EPS의 경우는 타설심도 보다는 차단벽두께의 영향이 진동차단에 더 효과적임을 알 수 있었다.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.267-270
• /
• 2021

Long-term experiments have been conducted on two important safety issues: long-term durability of a concrete barrier with the steel reinforcements and gas generation from low-and intermediate-level wastes in an underground research tunnel of a radioactive waste disposal facility. The gas generation and microbial communities were monitored from waste packages (200 L and 320 L) containing simulated dry active wastes. In the concrete experiment, corrosion sensors were installed on the steel reinforcements which were embedded 10 cm below the surface of concrete in a concrete mock-up, and groundwater was fed into the mock-up at a pressure of 2.1 bars to accelerate groundwater infiltration. No clear evidence was observed with respect to corrosion initiation of the steel reinforcement for 4 years of operation. This is attributed to the high integrity and low hydraulic conductivity of the concrete. In the gas generation experiment, significant levels of gas generation were not measured for 4 years. These experiments are expected to be conducted for a period of more than 10 years.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.305-311
• /
• 2002

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. A braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two types of brake with different sizes in stop and hold braking modes. Plasma spray coating technique was also used to coat the discs with ceramic powder. During the test four commercial brake pads were coupled with discs. Ceramic coated discs showed good stability in friction coefficient at high speed and high energy braking conditions. But they caused large wear loss of pad mass compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc. it showed fluctuating friction coefficient at high speed but small wear loss of pad mass compared with ceramic coated discs.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.429-430
• /
• 2002

In this study, three kinds of brake: discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Plasma spray coating technique was used to coat ceramic powder on the discs. In the test, four commercial sintered brake pads were coupled with discs. Ceramic coated discs have shown good stability in friction coefficient at high speed and high energy braking conditions. However, ceramic coated discs caused more wear loss of pad mass than the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. Steel disc showed fluctuating friction coefficient at high speed but less wear loss of pad mass than ceramic coated discs.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.51-55
• /
• 1999

A Ni/Ag/Stainless steel 310S(SS310S) multi-layer sheet has been fabricated by a combination of vacuum brazing, cold rolling and texture annealing processes. After heat-treating the thin Ni/Ag/SS310S multi-layer sheet at $900^{\circ}C$ for 2h, development of (100)<001>cube texture on Ni surface was revealed by (111) pole figure. Quantitative chemical analysis was made by EPMA for the cross-section of the Ni/Ag/SS310S multi-layer sheet. EPMA results showed that Ag diffusion into the Ni layer, which may suppress the cube texture development, was negligible. A small amount of Cr atoms were detected in the Ni layer. It showed that Ag can be used as a chemical barrier of alloying element atoms in Ni layer for the Ni/Ag/SS310S multi-layer sheet and a strong cube texture was developed for the Ni layer in the Ni/Ag/SS310S multi-layer sheet.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.51-59
• /
• 2016

STS 321 스테인리스강은 액체 로켓 엔진을 비롯한 고온 고압의 시스템의 재료로서 많이 사용된다. 321 스테인리스강의 고온에서의 변형 거동을 예측하기 위해 Kocks의 전위 장벽 모델을 근거로 유동응력에 대한 구성 방정식을 열적 응력 요소와 비열적 응력 요소를 사용하여 제안하였다. 제안한 모델은 321 스테인리스강의 상온부터 $500^{\circ}C$의 넓은 온도 영역에서 재료의 변형 거동들을 잘 예측하였다.