• 한국지반환경공학회 논문집
• /
• 제23권1호
• /
• pp.39-49
• /
• 2022

확장형 강관말뚝은 강관말뚝 내부에 확관장비를 삽입하여 강관을 확관하여 강관의 단면적을 증가시키는 공법으로 기존에 사용되는 마이크로파일과 비교하여 말뚝의 성능을 향상시킬 수 있는 공법이다. 본 연구에서는 실제 현장에서 강관의 확관이 가능한 확관장비를 개발하였다. 일련의 실내시험 및 현장시험을 통해 개발된 확관 장비의 강관 확장 성능을 확인하였다. 확관장치의 강관확관능력과 확관이 가능한 범위를 평가하기 위해 강관 확관장치의 최대압력에 대한 변형량과 확관시간을 측정한 결과, 강관두께가 얇을수록 변형량이 크게 발생하였으며 확관시간은 증가하였다. 두께 4.0mm 강관의 경우 두께 2.9mm 강관과 비교하여 변형량은 약 30% 적게 발생하였으나, 확관시간이 줄어드는 효과(약 40% 감소)를 얻을 수 있었다. 그리고 실제 지중에서 강관의 확관이 가능한지 확인하기 위해 현장 확관시험을 수행하였으며 지중에서 확관 후 확관 상태를 확인한 결과, 본 연구에서 개발한 강관 확관장치는 지중응력 조건에서도 강관 확관 성능을 발휘할 수 있음을 확인하였다. 마지막으로 확관하기 전 원상태의 강관과 확관 후 강관의 재료성능을 비교하여 확관형 강관말뚝의 역학적 안정성을 검증하였다.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.71-81
• /
• 2020

해상 교량기초용 대형 원형강관 가설공법은 가물막이와 작업대의 역할을 함께 수행할 수 있는 공법으로 개발되었다. 본 연구의 목적은 현장실험을 통해 시공과 운용 중 대형 원형강관의 안정성을 모니터링하기 위한 무선 원격계측시스템을 검증하는 것이다. 현장실험을 위해 수심 4m의 인공 해상 지반을 조성하였으며, 직경 5m, 높이 9.5m인 대형 원형강관을 석션 관입하였다. 대형 원형강관의 근입 깊이는 5m이다. 경사계와 변형률계는 상부 모듈의 서로 다른 네 면에 설치되었으며, 강관의 운반, 시공, 해체 전 과정에 걸쳐 경사각과 응력을 모니터링하였다. 실험결과, 경사계로 측정된 경사각은 석션 관입 중 일정하게 유지되었으나 x축 방향으로 더 크게 기울어진 것으로 나타났다. 또한, 서로 다른 면에 설치되어 있어도 같은 축 방향의 경사각은 거의 같게 측정되었다. 변형률계로 측정된 응력은 석션 관입 시 증가하였고, 인발 시 감소하였다. 또한, 측정된 응력으로부터 강관에 편심이 작용하고 있음을 알 수 있었다. 본 연구의 결과는 경사계와 변형률계로 구축된 무선 원격계측 시스템이 대형 원형강관의 안정성 모니터링에 유용하게 활용될 수 있음을 보여준다.

• 산업기술연구
• /
• 제24권A호
• /
• pp.239-250
• /
• 2004

Numerical analysis were performed to investigate the stability and internal movement of tunnel located beneath the base of abutment of bridge according to the method of supporting tunnel. Two supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method were used in the centrifuge model tests. The slip form of model lining, specially built to simulate the process of tunnel excavating under the condition of accelerated g-level, was used in the centrifuge model tests. Four centrifuge model tests were performed, changing the supporting methods of the multi-staged grouting method with steel pipes and the large diameter of pipe supporting method and the location of model abutment base of bridge. For internal displacement of tunnel, movements of the crown. The left and the right sides of spring line were measured during the proceeds of excavating tunnel in centrifuge model tests. Test results were compared with numerically estimated values of internal displacement of tunnel by using the commercially available FEM software of PENTAGON-3D. It was found that they were in good agreements and the large diameter of pipe supporting method was more stable than the multi-staged grouting method with steel pipes with respect to the internal movement of tunnel.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.121-128
• /
• 2007

This study performed in order to evaluate the effects of pipe materials on corrosion and bacteria regrowth using a laboratory scale batch test. Two varieties of feed water with different microbial conditions were selected: tap water, surface river water (Han River water), and five pipe materials; carbon steel, copper, galvanized iron, stainless steel, and PVC, Carbon steel and galvanized iron pipes showed higher corrosion rates than other materials. In terms of attached bacterial growth, pipes with PVC and stainless steel showed higher bacteria concentration compared to other materials. Pseudomonas vesicularis was the predominant bacteria found on biofilm. The behavior of bacterial growth in the pipes was observed using a scanning electron microscope.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.405-409
• /
• 2008

This technical paper is proposing a sound concept in the application of the rehabilitation method of the water supply steel pipe in the large diameter ranged from 1,800mm to 3,500mm. There were conducted the experimental tests for the specimens as well as the real steel pipe of diameter 2,200mm. The water pressure ejected from nozzle tip should be at least 2,500bar to have the satisfied surface profiles required in the design criterion. The most difficult thing is to keep the water pressure at the nozzle tip as 2,500bar during the consecutive work in the interval of the work site more than 1km. It is found that the method suggested in this study is adequate method to meet the specified design criteria. The results of this study provide the useful information how to setup the equipments for the successful work. This method also provides not only the omission of the blasting process but also the effect of the budget reduction.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.221-229
• /
• 2004

강관말뚝 머리를 확대기초 내에 얕게 근입하는 방법은 작업성과 배근의 용이성 등의 이점 때문에 일본과 우리나라에서 널리 적용되고 있다. 또한 일본은 몇 차례의 시방서 개정으로 말뚝머리 연결방법을 표준화하기에 이르렀고, 다양한 연결방법에 대하여 실험적 연구와 이론적 연구가 축적되었다. 따라서 국내에서도 최근 말뚝머리 보강설계에 대한 연구의 필요성이 대두되어 본 연구에서는 도로교 시방서에서 제시하는 대표적인 강관 말뚝머리 연결부 방법B 속채움방법에 대한 구조적 성능 및 특성을 파악하고자 단순 인발실험 및 단순 압입실험을 실시하여 말뚝머리 연결부의 거동 메카니즘을 규명하고자 한다. 또한 인발 및 압입실험의 결과에서 미끄럼 방지턱을 용접대신 고장력볼트로 접합하여 사용했을 경우 구조적 거동안정성을 파악하고자 한다.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.617-622
• /
• 2019

In order to develop a process for manufacturing a composite structure of an intermetallic compound foam and a hollow material, the firing and pore form of the Al-Ni precursor in a steel pipe are investigated. When the Al-Ni precursor is foamed in a hollow pipe, if the temperature distribution inside the precursor is uneven, the pore shape distribution becomes uneven. In free foaming, no anisotropy is observed in the foaming direction and the pore shape is isotropic. However, in the hollow pipe, the pipe expands in the pipe axis direction and fills the pipe. The interfacial adhesion between $Al_3Ni$ foam and steel pipe is excellent, and interfacial pore and reaction layer are not observed by SEM. In free foaming, the porosity is 90 %, but it decreases to about 80 % in the foam in the pipe. In the pipe foaming, most of the pore shape appears elongated in the pipe direction in the vicinity of the pipe, and this tendency is more remarkable when the inside pipe diameter is small. It can be seen that the pore size of the foam sample in the pipe is larger than that of free foam, because coarse pores remain after solidification of the foam because the shape of the foam is supported by the pipe. The vertical/horizontal length ratio expands along the pipe axis direction by foaming in the pipe, and therefore circularity is reduced.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.228-232
• /
• 2015

The water supply galvanized steel pipes of apartment buildings in Bucheon city constructed with building permission before 1994 have many problems such as leaks, the water containing rust, and low water pressure due to corrosion. Therefore, this study aims to find a way to renew the water supply pipes under investigation through a survey. As a result, when replacing the galvanized steel pipe with the corrosion-resistant pipe, the water supply system should also be changed from the gravity tank system to the booster pump system and the hygienic water storage tank. It is necessary to redraft the long-term repair plan including the replacement of the water supply system. Also, it is necessary to save the allowance reserve according to the modified long-term repair plan.

• 한국안전학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2008

In this study, small punch test and tensile test were performed with specimens directly machined from an ASTM A53 grade B carbon steel pipe at which an explosion accident was occurred in the Heavy Oil Unit. Main damage mechanism of the pipe was known as a high temperature hydrogen attack(HTHA). Effects of HTHA on the mechanical strength change of the A53B steel were studied in detail. Small punch test results have showed that maximum reaction forces, SP energy and ductility were decreased at hydrogen attacked part of the pipe compared with sound part of the pipe. Yield strength and tensile ultimate strength were calculated with the obtained small punch test curve results using different methods and compared the estimation methods. Small punch test simulation has been also performed with the finite element method and then mechanical strength, equivalent strain and fracture toughness were calculated with the obtained numerical analysis results. It was shown that the fracture toughness data calculated from small punch equivalent energy obtained by the finite element analysis for SP test was very low at the hydrogen attacked part.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.32-37
• /
• 2001

As increasing underground facilities, more effective management is needed nowadays. It is important to get an accurate information of underground facilities to manage that, so some methods of detecting location - electromagnetic induction method, ground penetration radar method, sonic method - are used to obtain the information of underground facilities. In this study, a magnetic method to detect underground facilities was developed. In the magnetic method, underground facilities are detected by a detector and the magnetic marker which is a permanent magnet and used to marking the location by attaching underground facilities. A proper characteristic of the magnetic marker was optimized by maxwell 20 magnetic field analysis tool, a test field was constructed with the magnetic marker, PVC pipe, and steel pipe under ground 1.5m, and the detector was made by modifying a common ferromagnetic detector. Magnetic strengths of the magnetic marker were measured by the detector at each location in the test field, and analyzed by magnetic field analysis tool in the same condition. In the result, the underground pipes were detectable within the deviation ${\pm}20cm$ at PVC pipe and ${\pm}10cm$ at steel pipe respectively. The steel pipe was more detectable by ferromagnetism. The developed magnetic method can be applied to maintain and manage underground facilities.