• Korea Trade Review
• /
• v.48 no.4
• /
• pp.209-232
• /
• 2023

This study aims to estimate the export performance factors of Korean Steel Products to the EU and the expected changes in exports according to the CBAM(Carbon Border Adjustment Mechanism). the factors influencing the export performance of Korean Steel Products to the EU were analyzed using a Gravity Model, and the expected export amount in the case of a Carbon Tax was calculated assuming that the CBAM would be implemented in 2026, As a result, it was empirically analyzed that economic growth, population growth, exchange rate and manufacturing production index of each EU country have a positive effect on exports in Korea, and it was analyzed that the effects of the single market and system due to the EU's economic community were also helpful in increasing exports but the Carbon Tax is imposed in 2026, reducing Korea's steel exports by about -3.6% to -5.7%

• International Commerce and Information Review
• /
• v.10 no.1
• /
• pp.175-191
• /
• 2008

Materials Industry has a very large ripple effect on national economic development. Nevertheless, Korea has been passing over importance of this Industry. So, this study examined competitiveness on ten chief exporting items to U.S.A market based on the understanding of vital role of materials industry in the national economy. Analyzing methods were Market Share, Trade Specialization Index(TSI), and Market Comparative Advantage(MCA) and the data were collected through parts and materials statistical data which produced by Korean Commerce and Industry Minister. From this study, following results were found. i) Highly ranked items of U.S.A market share were chemical fiber drapery weaving, synthetic fiber. These items commanded over 10% share of the same market and tire, steel wire occupied 9.05%, 8.65% respectively. ii) In searching trade balance aspects through TSI, tire and steel wire secured very powerful competitiveness among examined items in trading with U.S.A. while synthetic resins and other plastic material were very weak competitiveness in the same market. iii) Analysis results of market competitiveness by MCA, indicated that chemical fiber drapery weaving, synthetic fiber and tire ensured high-powered competitiveness in U.S.A Market. Therefore, these items would be positioned as main items in the market.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.67-78
• /
• 2023

The rare metals used as raw materials in high-tech industries undergo changes in demand structures and supply chains following domestic industrial structural shifts and technological advancements, exhibiting high price volatility. Therefore, it is necessary to periodically analyze changes in the demand structures of rare metals. Since domestic demand for most rare metals relies on imports in Korea, the changes in domestic demand for rare metals can be identified by analyzing changes in their trade structure. In the present study, we analyze the changes in trade volume, trade growth rate, trade rankings, and trading countries from 2000 to 2022 for 35 rare metals, categorized into five types-ores, metals, alloys, compounds, and scrap. The trade of the raw materials of rare metals in Korea has generally increased since the 2000s, except for a significant decline in 2009 and 2016. The total trade volume, encompassing both exports and imports, has increased by approximately tenfold in 2022 compared to 2001. Until the mid-2010s, the trade of the raw materials of rare metals was primarily focused on those used in steel-manufacturing such as silicon, nickel, chrome, molybdenum, manganese, and others. However, after that period, there has been an increase in the trade of platinum group metals like palladium, rhodium, platinum, and the raw materials of rare metals for secondary battery-manufacturing such as lithium and cobalt. Particularly in 2022, lithium has become the largest share in trade of the raw materials of rare metals in Korea, due to the price surge and increase in demand.

• Advances in Computational Design
• /
• v.3 no.4
• /
• pp.385-404
• /
• 2018

The study investigated an area of sustainable structural design that is often overlooked in practical engineering applications. Specifically, a novel method to simultaneously optimise the cost and embodied carbon performance of steel building structures was explored in this paper. To achieve this, a parametric design model was developed to analyse code compliant structural configurations based on project specific constraints and rigorous testing of various steel beam sections, floor construction typologies (precast or composite) and column layouts that could not be performed manually by engineering practitioners. Detailed objective functions were embedded in the model to compute the cost and life cycle carbon emissions of the different material types used in the structure. Results from a comparative numerical analysis of a real case study illustrated that the proposed optimisation approach could guide structural engineers towards areas of the solution space with realistic design configurations, enabling them to effectively evaluate trade-offs between cost and carbon performance. This significant contribution implied that the optimisation model could reduce the time required for the design and analysis of multiple structural configurations especially during the early stages of a project. Overall, the paper suggested that the deployment of automated design procedures can enhance the quality as well as the efficiency of the optimisation analysis.

• Steel and Composite Structures
• /
• v.7 no.2
• /
• pp.105-118
• /
• 2007

On September $11^{th}$ 2001, the twin towers of the World Trade Center in New York City were struck by two hijacked airplanes. Despite severe local damage induced by the impact, the towers were able to sustain 102 and 56 minutes of the subsequent multi-storey fires before collapsing. The purpose of this study is to contribute to the understanding of the in-fire performance of composite trusses by examining the behaviour of the longer-span type used in the towers. It makes no attempt to be a forensic study of the actual events. Using the finite element package Vulcan, the structural mechanics of typical long-span composite floor trusses are explained, under a variety of scenarios, as the fire temperatures rise. Different boundary conditions, degrees of protection and loading are all covered, the results being presented mainly in the form of graphs of deflection and internal force of members against time.

• Structural Engineering and Mechanics
• /
• v.43 no.1
• /
• pp.31-51
• /
• 2012

This paper presents a computational study that explores the design of rigid steel frames by considering construction related costs. More specifically, two different aspects are investigated in this study focusing on the effects of (a) reducing the number of labor intensive rigid connections within a frame of given geometric layout, and (b) reducing the number of different member section types used in the frame. A genetic algorithm based optimization framework searches design space for these objectives. Unlike some studies that express connection cost as a factor of the entire frame weight, here connections and their associated cost factors are explicitly represented at the member level to evaluate the cost of connections associated with each beam. In addition, because variety in member section types can drive up construction related costs, its effects are evaluated implicitly by generating curves that show the trade off between cost and different numbers of section types used within the frame. Our results show that designs in which all connections are considered to be rigid can be excessively conservative: rigid connections can often be eliminated without any appreciable increase in frame weight, resulting in a reduction in overall cost. Eliminating additional rigid connections leads to further reductions in cost, even as frame weight increases, up to a certain point. These complex relationships between overall cost, rigid connections, and member section types are presented for a representative five-story steel frame.

• Journal of Korea Trade
• /
• v.26 no.2
• /
• pp.45-64
• /
• 2022

Purpose - This paper examines South Korea's potential status as a carbon leakage country, and the level of risk posed by the Korean emissions trading scheme (ETS) for Korean industries. The economic effects of border carbon adjustments (BCAs) to protect energy-intensive Korean industries in the process of achieving the carbon reduction target by 2030 through the Korean ETS are also analyzed. Design/methodology - First, using the Korean Input-Output (IO) table, this paper calculates the balance of emissions embodied in trade (BEET) and the pollution terms of trade (PTT) to determine Korean industries' carbon leakage status. Analyses of the risk level posed by carbon reduction policy implementation in international trade are conducted for some sectors by applying the EU criteria. Second, using a computable general equilibrium (CGE) model, three BCA scenarios, exemption regulations (EXE), reimbursement (REB), and tariff reduction (TAR) to protect the energy-intensive industries under the Korean ETS are addressed. Compared to the baseline scenario of achieving carbon reduction targets by 2030, the effects of BCAs on welfare, carbon leakage, outputs, and trading are analyzed. Findings - As Korea's industrial structure has been transitioning from a carbon importing to a carbon leaking country. The results indicate that some industrial sectors could face the risk of losing international competitiveness due to the Korean ETS. South Korea's industries are basically exposed to risk of carbon leakage because most industries have a trade intensity higher than 30%. This could be interpreted as disproving vulnerability to carbon leakage. Although the petroleum and coal sector is not in carbon leakage, according to BEET and PTT, the Korean ETS exposes this sector to a high risk of carbon leakage. Non-metallic minerals and iron and steel sectors are also exposed to a high risk of carbon leakage due to the increased burden of carbon reduction costs embodied in the Korean ETS, despite relatively low levels of trade intensity. BCAs are demonstrated to have an influential role in protecting energy-intensive industries while achieving the carbon reduction target by 2030. The EXE scenario has the greatest impact on mitigation of welfare losses and carbon leakage, and the TAF scenario causes a disturbance in the international trade market because of the pricing adjustment system. In reality, the EXE scenario, which implies completely exempting energy-intensive industries, could be difficult to implement due to various practical constraints, such as equity and reduction targets and other industries; therefore, the REB scenario presents the most realistic approach and appears to have an effect that could compensate for the burden of economic activities and emissions regulations in these industries. Originality/value - This paper confirms the vulnerability of the Korean industrial the risk of carbon leakage, demonstrating that some industrial sectors could be exposed to losing international competitiveness by implementing carbon reduction policies such as the Korean ETS. The contribution of this paper is the identification of proposed approaches to protect Korean industries in the process of achieving the 2030 reduction target by analyzing the effects of BCA scenarios using a CGE model.

• International Commerce and Information Review
• /
• v.17 no.1
• /
• pp.309-337
• /
• 2015

Recently, Korea had virtually reached an FTA deal with China on November 10, 2014 after the 14 rounds of negotiation during past two and half years. The two countries agreed to the FTA's 22 chapters, including products, services, investment, e-commerce, finance, communication, and other trade issues, but rice and several sensitive agricultural and fisheries products were excluded from the deal. Korea and China will remove their import tariffs on more than 90 percent of all products and more than 85 percent of imports by value within 20 years once the FTA is implemented. This paper intends to analyze the impacts of Korea-China FTA on the major industries in Daegu-Gyeongbuk region. Considering the statistics on the bilateral trade between China and Daegu-Gyeongbuk region, import tariff rates of the two countries, trade specialization indices of the major industries, and the package of Korea-China FTA deal, this study investigated the sectoral effects of Korea-China FTA on the four main industries, textiles, electrical-electronics, machinery and auto parts, and steel and iron industries in that region.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.51-60
• /
• 2014

In this study, the domestic supply & demand of the raw materials of 35 rare metals was analyzed categorized as four types - ores, metals, compounds and scraps. Foreign trade volumes of the raw materials of rare metals have been steadily increased, furthermore, recently trade growth rate highly exceeds GDP. The raw materials of rare metals - silicon, nickel, molybdenum, manganese, etc. - for steel industry were the most big part of the raw materials of rare metals trade, while the raw materials of rare metals for electronics industry were imported relatively small volumes less than $100 million. However systematic supply & demand management on the raw materials of rare metals for electronics industry is needed since recently growth rate per year has been remarkably high over 20%. Import volumes were about three times bigger than export scale, and most of the raw materials of rare metals were traded as a metal form.

• KDI Journal of Economic Policy
• /
• v.37 no.2
• /
• pp.40-63
• /
• 2015

Anthracite exports have special value within the DPRK's economy. In this paper, we focus on what determines the DPRK's anthracite exports to China. We use panel data consisting of cross-section data from 30 provinces in China and quarterly time-series data from 1998 to 2013. Controlling for all other variables that affect anthracite imports, the variable for steel production in China is robust and statistically significant. This is consistent with on-site interviews which indicate that much of North Korean anthracite is consumed by China's steel industry. This implies that the North Korean authorities need to make adjustments to the foreign trade structure, as the import demand for anthracite in China may decline further.