• 자원리싸이클링
• /
• 제20권1호
• /
• pp.3-13
• /
• 2011

대만의 제강생산량은 21,290천톤이고, 전기로제강량은 제강생산량의 약 반, 즉 11,200천톤이다. 그리고 이 전기로 제강시 발생되는 더스트량은 160천톤(2009년도)이다. Walcz 프로세스(탄소강 EAF 더스트)에서 약 70천톤, RHF/SAF 프로세스(스테인레스강 EAF 더스트)에서 약 60천톤을 처리하고 있다. 그리고 약 90천톤/년의 조산화아연(ZnO)이 생산되고 있는 것으로 추정된다. 현재 새로운 EAF 더스트 리싸이클링법이 개발되고 있고, 조산화아연의 품위향상이 앞으로 과제이다.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.243-252
• /
• 2019

최근 지하공간의 활용도가 높아짐에 따라 지하굴착의 수요가 증가하는 추세에 있다. 본 연구에서는 기존의 주열식 흙막이 말뚝공법의 문제점을 크게 개선하면서 향후 도심지에서 30m 이상의 대심도 지반 굴착시 발생 가능한 지반함몰 및 주변지반의 영향을 최소화할 수 있는 흙막이 CS-H 벽체의 개발 및 안정성 평가를 위하여 지반 신소재를 이용한 콘크리트 배합을 실시하였다. 지반신소재 벽체 재료로는 강섬유, 합성섬유, 유리섬유의 섬유보강재 배합과 풍쇄슬래그, 페로니켈의 잔골재 대체재를 선택하여 배합시험을 실시하였다. 또한 각 배합별 적절한 배합비를 선정하기 위하여 슬럼프시험, 압축강도 및 탄성계수, 휨강도, 할렬인장강도, 삼축투수 시험을 수행하였다. 시험결과 개발하고자 하는 CS-H 벽체에서 강섬유 배합조건의 시험값이 다른 기준값에 비해 매우 우수한 결과를 나타내어 가장 적합한 것으로 평가되었다.

• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.167-174
• /
• 2017

고비율의 고로슬래그를 사용한 슬러리 충전 고성능 섬유보강 시멘트 복합체(SI-HPFRCC)의 역학적 성능을 평가하였다. SI-HPFRCC 실험체 제작을 위해 hooked-end 형의 강섬유를 6.4% 사용하였다. 재령에 따른 압축강도 및 압축인성과 휨강도 및 휨인성 실험을 통해 SI-HPFRCC의 역학적 성능을 평가하였다. 또한 섬유보강 효과를 평가하기 위해 SI-HPFRCC 실험체 제작에 사용된 슬러리 매트릭스의 압축강도 및 휨강도를 측정하였다. 실험결과 SI-HPFRCC의 휨거동이 재령에 따라 취성이 증가함을 확인하였다. 압축거동의 경우에도 재령에 따른 취성 증가를 볼 수 있었으나 그 정도는 미미하였다. 강도측면에서 볼 때 SI-HPFRCC는 슬러리 매트릭스에 비해 약 140~190%의 압축강도 증가와 440~500%의 휨강도 증가를 보였다.

• 한국환경농학회지
• /
• 제40권3호
• /
• pp.231-238
• /
• 2021

BACKGROUND: Metal contamination of farmlands nearby abandoned mines is a serious environmental problem. This study was conducted to evaluate the efficiency of stabilizers on different type of the soils contaminated with metals. METHODS AND RESULTS: The texture of silt loam soil initially contaminated with heavy metal was artificially adjusted to loam and sandy loam by adding sand, and the soil organic matter content (1.5%) was also altered by adding peat to the soils at 3.5 and 8.0%. The soils were mixed with 3% (w/w) of each limestone, dolomite, and steel slag. For the soils with different textures, the bioavailability of As was found to be the lowest in sandy loam compared to others metals such as Cu, Pb, and Zn. The efficacy of limestone and dolomite was not significantly different compared to the soils having different organic matter contents, but the stabilization efficiency of steel slag increased as the soil organic matter content increased. Moreover, stabilizers showed inhibition effect on the uptake of metals to plant. CONCLUSION: The stabilizers were found as effective materials to immobilize metals in soil and to decrease plant uptake of metals. Studies are needed to deeply elucidate the interaction between influencing factors and various stabilizers.

• 대한금속재료학회지
• /
• 제46권4호
• /
• pp.257-266
• /
• 2008

AHydrogen induced cracking (HIC) was phenomenologically studied in terms of the effect of nonmetallic inclusions and hot rolling process parameters. By comparing the level of non-metallic inclusions in two different kinds of commercial grade steels having different HIC resistance, the role of non-metallic inclusions in HIC occurrence was investigated. Change in inclusion morphology and distribution during hot rolling was also studied throughout slab, rolling at austenite recrystallization region (roughing mill; RM) and rolling at austenite non-recrystallization region (finish mill; FM). In addition, the contribution of RM and FM parameters to HIC was investigated from the standpoint of change in inclusion morphology during hot rolling processes. As a result, HIC was closely related to the separation of large complex inclusion during hot rolling process. Large complex inclusions originated from the improper Ca treatment, after which equilibrium composition of slag should have resulted in eutectoid composition. By controlling the equilibrium slag composition equivalent to eutectoid one, HIC resistance could be improved due to the reduced size of inclusions. In addition, change in reduction/pass in RM had an effect on HIC resistance of steels while that in FM did not. Increase in the reduction/pass in the latter stage of RM improved HIC resistance of steels by enhancing the void enclosure around inclusions.

• 유기물자원화
• /
• 제23권1호
• /
• pp.63-69
• /
• 2015

본 연구는 포항철강산업단지를 대상으로 부산물 발생 현황과 현재까지 구축된 산업공생 네트워크를 분석하는데 목적을 두었다. 포항은 경상북도 시군 중 사업장 폐기물 발생량과 재활용 제외 폐기물 발생량이 모두 가장 높았으며, 대부분이 포항철강산업단지에서 발행하였다. 부산물 발생량을 조사한 결과 재활용을 제외한 폐기물 발생량의 대부분은 광재류가 차지하고 있으며 폐목재류, 분진류, 폐합성수지, 폐합성고무의 순으로 나타났다. 포항철강산업단지 입주기업간 구축된 부산물 거래 공생맵을 작성한 결과 부산물 중 폐내 화물 및 슬래그를 이용한 부산물 거래가 가장 활발하게 이루어지는 것으로 나타났다.

• 대한건축학회논문집:구조계
• /
• 제34권11호
• /
• pp.11-18
• /
• 2018

In this study, seven R/C beams, designed by the steel fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength were assessed. Test results showed that test specimens (BSSR-20, 40, 60, 80) were increased the maximum load carrying capacity by 2~9% and the ductility capacity by 10~22% in comparison with the standard specimen (BSS) respectively. And the specimens (BSSR-100) was decreased the maximum load carrying capacity by 5% and the ductility capacity by 44% in comparison with the standard specimen (BSS) respectively.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.28-36
• /
• 1999

Wet underwater arc welding process is investigated by using experimentally developed flux coated underwater arc welding electrode and SS400 steel plate of 12mm thickness as base metal. Three kinds of different flux covered wet arc welding electrode of 4mm diameter(BK-01, BK-02, BK-03) are individually developed, and one of the improved underwater welding electrode (BK-03) may be put to practical use for underwater wet arc welding process. The results obtained from this experimental study are as follows : 1. Arc stability of developed underwater wet welding electrode is better than that of the domestic covered arc welding electrode. 2. Workability of welding electrode, remove ability of slag and bead appearances using improved underwater wet welding electrode are remarkably better than that of others. 3. Heat affected zone of test specimen welded in the underwater gets to become a lot smaller than that of test specimen welded in the air, and the maximum hardness of heat affect zone of developed underwater wet welding electrode is lower to that of domestic arc welding electrode.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.73-79
• /
• 2001

Underwater wet bead-on-plate welds were experimentally performed on 11mm thick SS400 steel plate as base metal by using six different types of flux coated electrodes of 3.2mm diameter. Two kinds of different flux coated wet arc electrodes (UW-1, UW-2) were individually designed flux materials, three kinds of the electrodes (E4301, E4311, E4313) were terrestrial electrodes and the another one (TN20) was an imported underwater wet welding electrode. As results, the individually designed flux coated underwater electrode, UW-2 and TN20 had a good starting and the excellent arc stability compared with other electrodes. No significant difference of bead appearance could be detected, but the slag detachability of TN20 electrodes was relatively undesirable. By rapid cooling rate, the hardness value and the portion of martensite of HAZ were increased, but it was considerably maintain stable for TN20 and UW-2 electrodes. The individually designed flux coated electrode, UW-2 could be used in practice for underwater bead welds.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.107-109
• /
• 2012

In Korean coal power plants, rising coal prices have recently led to the rapid utilization of low lank coals such as sub-bituminous coal with low calorific values and low ash fusion temperatures. Using these coals beyond the design range has resulted in important issues including slagging and fouling, which cause negative effects in boiler performances and unstable operations. The purpose of this study is to observe slagging and fouling characteristics resulted from burning various ranks of pulverized coals. We have tested 3 different coals: FLAME(bituminous), KCH(sub-bituminous) and MOOLARBEN(bituminous)coals in the pilot system $50kW_{th}$ scale. A stainless steel tube with preheated air inside was installed in the downstream in order to simulate water wall. Collected ash on the probe and the slag inside the furnace near burner were analyzed by SEM (scanning electron microscopy) to verify the formation degree, surface features and color changes of the pasty ash particles. Induced coupled plasma and energy dispersive X-ray spectroscopy were also performed to figure out the chemical characteristics of collected samples. As a result, KCH was observed that more slag was developed inside the walls of the furnace and on the probe than the other two kinds of coals, as shown in the calculate slagging and fouling indices as well.