• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.171-177
• /
• 2003

The electronic properties of the passive film formed on Fe-20Cr ferritic stainless steel in pH 8.5 buffer solution containing 0.05 M EDTA (ethylene diammine tetraacetic acid) were examined by the photocurrent measurements and Mott-Schottky analysis for the film. XPS depth profile for the film demonstrated that Cr content in the outermost layer of the passive film was higher in the solution with EDTA than that in the solution without EDTA, due to selective dissolution of Fe by EDTA. In the solution with EDTA, the passive film showed characteristics of an amorphous or highly disordered n-type semiconductor. The band gap energies of the passive film are estimated to be ~ 3.0 eV, irrespective of film formation potential from 0 to 700 $mV_SCE$ and of presence of EDTA. However, the donor density of the passive film formed in the solution with EDTA is much higher than that formed in the solution without EDTA, due to an increase in oxygen vacancy resulted from the dissolution of Fe-oxide in the outermost layer of the passive film. These results support the proposed model that the passive film formed on Fe-20Cr in pH 8.5 buffer solution mainly consists of Cr-substituted $\gamma$-$Fe_2O_3$.

• 비파괴검사학회지
• /
• 제13권4호
• /
• pp.32-41
• /
• 1994

탄성파에 의한 미소 동적 변위를 측정하기 위하여 안정화 회로가 부착된 Michelson 간섭계를 개발하였다. 안정화 회로는 외부 진동신호에 따른 광로차의 교란을 보상하기 위하여 압전구동기가 부착된 기준거울을 사용하였다. 안정화 회로를 사용함으로써, 간섭계는 외부 진동신호의 영향을 줄일 수 있었고, 항상 직각조건(quadrature condition)을 만족하여 광검출기의 출력신호가 최대의 감도와 선형성을 유지할 수 있었다. 검출가능한 최소 변위는 10MHz 대역에서 0.3nm 이었다. 개발된 간섭계를 사용하여 유리관 파괴 및 강철구 충격에 의한 진앙점에서의 변위를 검출하여 이론적으로 계산된 값과 비교하였다.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1061-1066
• /
• 2016

주름 강판의 주름은 강판의 중량당 굽힘 강성을 획기적으로 증가시킨다. 그러나 주름 강판은 같은 중량을 갖는 평판보다 낮은 차음 성능을 보인다. 특히, 특정한 주파수대역에서는 투과손실이 크게 감소한다. 이 문제의 주 요인은 주름단위에서의 국부적 공진으로 알려져 있다. 특정 주파수대역에서 다수의 국부적 공진모드가 발생하고 모드밀도가 급속히 증가한다. 본 연구에서는 음 투과손실과 모드 밀도 사이의 관계를 검토한다. 최종적으로, 중량의 증가 없이 주름 강판의 차음 성능을 향상시키기 위한 모드 밀도의 측면에서의 설계전략을 제시한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.157-162
• /
• 2001

Fretting is a potential degradation mechanism of structural components and equipments exposed to various environments and loading conditions. The fretting degradation, for example, can be observed in equipments of nuclear, fossil as well as petroleum chemical plants exposed to special environments and loading conditions. It is well known that a cast stainless steel(CF8M) used in a primary reactor coolant(RCS) degrades seriously when that material is exposed to temperature range ken $290^{\circ}C{\sim}390^{\circ}C$ for long period. This degradation can be resulted into a catastrophical failure of components. In the present paper, the characteristics of the fretting fatigue are investigated using the artificially aged CF8M specimen. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 1800hr at $430^{\circ}C$ respectively. Through the investigations, the simple fatigue endurance limit of the virgin specimen is not altered from that obtained from the fatigue tests imposed the fretting fatigue. The similar tests are performed using the degraded specimen. The results are not changed from those of the virgin specimen. The significant effects of fretting fatigue imposed on both virgin and degraded specimen on the fatigue strength are not found.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.149-159
• /
• 1989

The purpose of this study was to assess the effects of wavelength and intensity of light curing units on the curing of composite resin. The wavelength and intensity of nine units were evaluated with Optical Multichannel Analyzer and Radiometer. Two-part split stainless steel mold with a cylindrical hole-3.0mm in diameter, 6.0mm in hgieht-was prepared. After placing a Mylar strip between two parts, 100 specimens were made by inserting each of four composite resins into the mold and irradiating for 20 seconds with five light units alternatively. The curing depths were measured by scraping method and evaluated by two-way ANOVA. And Vicker's hardness measurements were made on the longitudinally sectioned surface at 0.5mm interval. The results were as follows: 1. Visilux 2 showed a narrow spectral band within the effective wavelength in initiating polymerization and the highest intensity. Translux showed the diffuse spectrum of wavelength and the lower light intensity. 2. Visilux 2 showed the highest curing effect in any composite resin and then followed by Optilux, Efos 35, Heliomat and Translux. (p < 0.01) 3. Durafill showed the deepest curing depth in any light unit and then followed by Bisfil M, Silux and Heliosit. (p < 0.01). 4. Maximum hardness values showed 0.1mm and 0.5mm under top surface and then gradually decreased with depth.

• 한국건축시공학회지
• /
• 제2권1호
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1501-1510
• /
• 2015

The frequency selective surface (FSS) embedded hybrid composite materials have been developed to provide excellent mechanical and specific electromagnetic properties. Radar absorbing structures (RASs) are an example material that provides both radar absorbing properties and structural characteristics. The absorbing efficiency of an RAS can be improved using selected materials having special absorptive properties and structural characteristics and can be in the form of multi-layers or have a certain stacking sequence. However, residual stresses occur in FSS embedded composite structures after co-curing due to a mismatch between the coefficients of thermal expansion of the FSS and the composite material. In this study, to develop an RAS, the thermal residual stresses of FSS embedded composite structures were analyzed using finite element analysis, considering the effect of stacking sequence of composite laminates with square loop (SL) and double square loop (DSL) FSS patterns. The FSS radar absorbing efficiency was measured in the K-band frequency range of 21.6 GHz. Residual stress leads to a change in the deformation of the FSS pattern. Using these results, the effect of transmission characteristics with respect to the deformation on FSS pattern was analyzed using an FSS Simulator.

• Steel and Composite Structures
• /
• 제12권1호
• /
• pp.53-72
• /
• 2012

In this study, the physically-based failure models for matrix and fibers in compression and tension loading are introduced. For the 3D stress based fiber kinking model a modification is proposed for calculation of the fiber misalignment angle. All of these models are implemented into the finite element code by using the advantage of damage variable and the numerical results are discussed. To investigate the matrix failure model, purely in-plane transverse compression experiments are carried out on the specimens made by Glass/Epoxy to obtain the fracture surface angle and then a comparison is made with the calculated numerical results. Furthermore, shear failure of $({\pm}45)_s$ model is investigated and the obtained numerical results are discussed and compared with available experimental results. Some experiments are also carried out on the woven laminated composites to investigate the fracture pattern in the matrix failure mode and shown that the presented matrix failure model can be used for the woven composites. Finally, the obtained numerical results for stress based fiber kinking model and improved ones (strain based model) are discussed and compared with each other and with the available results. The results show that these models can predict the kink band angle approximately.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.677-688
• /
• 1997

The purpose of this study was to find out the symbolism of religious costume which has showed the religious belief system through costume practice and culture. Indian Religious costume each has its own mark was investigated in this study. In India, religion is a way of life. It is an integral part of the entire Indian tradition. The results were as follows; India's several main religions are Hinduism(About 80% of population) , Islam (About 11% of population) , Sikhism(less than 2% of population) , Jainism(less than 1% of population) , Buddhism(less than 1% of population) and Christianity(About 3% of population but excluding here) Religious faith system which symbolized Godhood, spiritualty, ascetics, restraint, chastity, sacred and dignity gave a certain shape to each color, ornaments, dressing and marking of religion costume. In connection with religion costumes, there were Hindu's Tika, sacred ash, long hair, knot and holy band (Yajnopavita) , Buddhist's kayysa and tonsures, Jams' no covering, Muslim's chador and skullcap, Sikh's turban (with no cutting hair) , comb, steel bracelet, drawers, sword or dagger. The characteristics, head especially of thebody and white in the colors were made much account for India religion costume. Traditional costume seems to be worn at the present times in India. But apparently these costume associated with religion costume because of Hindu more than 80% of population.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.56-67
• /
• 1989

In this study, the possibility of evaluating the peculiar fracture strength of weldment in high strength steels was investigated by means of a small punch(SP) test. In order to obtain the ductile-brittle transition temperature(DBTT) of SP energy by which the fracture strength of weldment in structural steels such as SS41 and SM53B steels had been evaluated in our preceding publication, the effects of notches and loading rates on SP energy were discussed. It was found that the correspondence of SP energy to critical COD at test temperature -196.deg. C showed a linear relation with some deviation. The empirical correlation with scatter band, Esp/(Esp)p = 1.67[.delta./(.delta./sub c//(.delta./sub c/)/sub p/]-0.55, was developed between the SP energy ratio and critical COD ratio of each weld structure compared with parent material at test temperature -196.deg. C. In addition, there did not appear to be a significant effect of test materials and specimen size etc. on the correlation.