• 공업화학
• /
• 제8권3호
• /
• pp.543-549
• /
• 1997

니켈(Ni)이 담지된 촉매상에서 이산화탄소와 부탄의 직접반응에 의한 합성가스와 탄화수소화합물의 생성을 검토하였다. $CO_2$와 $C_4H_{10}$의 반응에서 니켈 담지촉매는 백금 담지촉매와 유사한 활성을 나타내었으며, 부탄의 탈수소에 따큰 코크의 누적이 현저하게 나타났다. 담체로 알루미나나 Y형 제올라이트를 사용하면 일산화탄소와 수소가 주생성물이었다. 반면에 니켈을 ZSM-5형 제올라이트에 담지한 경우에는 생성물 중에 다량의 방향족화합물이 얻어졌다. Ni/ZSM-5, Ni/NaY 및 Ni/알루미나 촉매상에서 반응물 중의 이산화탄소/부탄 몰비의 증가와 함께이산화탄소의 전환율도 증가하다가 2이상에서 다시 감소하였다. 담체로 ZSM-5를 사용하고 이에 담지되는 니켈의 양을 다르게 하였을 때, 반응물의 전환율은 니켈금속의 담지량이 5wt% 부근에서 가장 높았다. 코크가 누적된 촉매상에 $CO_2$ 가스나 수증기를 흘리면 코크의 양은 감소하였다. 촉매상에 누적된 코크는 활성이 높은 상태로 결합되어 있으며, 표면의 활성탄소는 반응의 중요한 중간체로 작용하는 것으로 해석된다.

• 공업화학
• /
• 제20권4호
• /
• pp.423-429
• /
• 2009

본 연구의 목적은 바이오가스를 이용하여 고농도 수소 생산과 CO 제거가 가능한 글라이딩아크 플라즈마 개질 시스템의 개발이다. 이를 위하여 수성가스 전이반응기는 수증기 주입량 변화,촉매층 온도 변화에 대하여, 선택적 산화반응기는 촉매층 온도변화, 공기주입량에 대하여 실험을 진행하였다. 기준조건은 S/C 비 3, 촉매층 온도 $700^{\circ}C$, 전체가스량 16 L/min, 입력전력 2.4 kW, 바이오가스 구성비($CH_4$ : $CO_2$ ) 6 : 4이다. 이때의 실험결과는 HTS의 최적조건은 S/C비 3, 반응온도 $500^{\circ}C$, LTS의 최적조건은 S/C 비 2.9, 반응온도 $300^{\circ}C$이다. 또한 PROX I단의 최적조건은 각각 공기유입량 300 mL/min, $190^{\circ}C$, PROX II단의 최적조건은 공기유입량 200 mL/min, $190^{\circ}C$을 나타내었다. 반응기를 모두 지난 후의 합성가스는 $H_2$ 수율 55%, $CH_4$ 전환율 97%, $CO_2$ 전환율 97%, CO 선택도는 0%로 바이오가스를 개질하여 생성된 합성가스는 높은 수율을 나타내며, CO 선택도는 0%를 나타내었다.

• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.54-61
• /
• 2008

Integrated Gasification Combined Cycle (IGCC) power plant converts coal to syngas, which is mainly composed of hydrogen and carbon monoxide, by the gasification process and produces electric power by the gas and steam turbine combined cycle power plant. The purpose of this study is to investigate the influence of using syngas in a gas turbine, originally designed for natural gas fuel, on its performance. A commercial gas turbine is selected and variations of its performance characteristics due to adopting syngas is analyzed by simulating off-design gas turbine operation. Since the heating value of the syngas is lower, compared to natural gas, IGCC plants require much larger fuel flow rate. This increases the gas flow rate to the turbine and the pressure ratio, leading to far larger power output and higher thermal efficiency. Examination of using two different syngases reveals that the gas turbine performance varies much with the fuel composition.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.888-888
• /
• 2009

A simulation study on SCR (Steam Carbon dioxide Reforming) process in gas-to-liquid (natural gas to Fischer-Tropsch synthetic fuel) process was carried out in order to find optimum reaction conditions for GTL (gas-to-liquid) process reaction. Optimum SCR operating conditions for synthesis gas to FT (Fischer-Tropsch) process were determined by changing reaction variables such as feed temperature and pressure. During the simulation, overall synthesis process was assumed to proceed under steady-state conditions. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. SCR process was considered as reaction models for synthesis gas in GTL proess. The effect of temperature and pressure on SCR process $H_2$/CO ratio and the effect of reaction pressure on SCR reaction were mainly examined. Simulation results were also compared to experimental results to confirm the reliability of simulation model. Simulation results were reasonably well matched with experimental results.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.79-90
• /
• 1998

One of the objectives of this study were to develop a process for manufacturing activated carbons from agricultural by-products(rice shells and saw dust) and another is to measure the iodine number, ash content and removal ratio of COD. The other is to compare those values with those of commercialized activated carbons. Agricultural by-products based activated carbons were manufactured through the steam-reaction method. A rotary kiln type furnace was used for both carbonization and activation. The optimum operating temperatures for carbonization and activation were $650^{\circ}C$ and $900^{\circ}C$, respectively. For the activated carbons produced under these conditions, the iodine number was 1,127mg/g. Especially, removal efficiency of COD was 61.5% for 40mg/L of wastewater and 30% for 150mg/L of SLS(Sodium Lauryl Sulfate).

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.813-818
• /
• 2008

고체 산화물 연료전지(SOFC)에서 Ni/YSZ 음극 촉매를 이용한 내부 개질 반응 시 코크 형성에 의한 촉매 비활성화 문제점을 개선하기 위해 음극에 여러가지 조촉매(Ce, Co, Cu, Cr, Mn, Pd, K, $K_2Ti_2O_5$)들을 첨가하여 그 영향을 조사하였다. $H_2O/CH_4=1.5$ 몰비, 800의 반응 조건하에서 수증기 개질 반응을 행한 결과 전이금속산화물들은 코크형성을 억제하는 효과가 없었고 메탄전환율도 오히려 감소하였다. Potassium을 담지한 Ni/YSZ의 경우는 초기에는 뚜렷한 코크형성 억제 효과가 있었으나 반응 후 42시간이 지나면 휘발에 의한 Potassium함량 감소로 급격한 촉매활성의 저하가 일어났다. 격자 구조에 Potassium이 내장된 $K_2Ti_2O_5$를 5% 혼합한 Ni/YSZ의 경우에는 장기간 운전에도 반응 활성이 줄어들지 않아서 음극 촉매의 코크 억제용 첨가제로 적용될 수 있음을 알았다. 반응시간에 따른 촉매의 비활성화는 촉매 표면에서의 graphidic carbon의 생성 때문으로 밝혀졌다.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.1-8
• /
• 2023

기후변화 대응을 위하여, 항공 분야를 포함한 운송 분야에서 국제온실가스 감축제도 도입 추진 및 대체 에너지 개발 등 환경문제에 대한 연구개발이 활발하다. 그 중 무탄소 에너지원으로 주목받는 암모니아 연료에 대한 관심이 증대되고 있다. 암모니아는 액화 및 운반이 용이하며, 메탄올과 비슷한 에너지 밀도 등의 장점이 있다. 그러나 폭발성 및 독성으로 취급성이 어렵다. 본 연구에서는 암모니아에 비해 취급이 용이한 요소수에 고온의 수분으로 열분해와 가수분해 반응을 유도하여 안정적인 암모니아 발생을 시도하고자 하였다. 암모니아 가수분해 촉진을 위해 고온의 증기를 이용하였고 이론 당량비 미만의 암모니아 발생원인 규명을 하고자 했다. 기체분자운동론에 기인하여 가수분해 촉진을 위한 충분한 충돌빈도가 이루어지지 않았다는 가설을 수립했다. 수분 공급량 변화를 통해 미반응 이소시안산의 가수분해 여부를 실험하였고 암모니아 발생량이 증가함을 확인하였다. 일정 구간동안 암모니아 발생량 증가는 증기 온도, 수분공급유량에 종속됨을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.225-230
• /
• 2004

Synthesis gas is a high valued compound as a basic chemicals at various chemical processes. Synthesis gas is mainly produced commercially by a steam reforming process. However, the process is highly endothermic so that the process is very energy-consuming process. Thus, this study was carried out to produce synthesis gas by the partial oxidation of methane to decrease the energy cost. The effects of reaction temperature and flow rate of reactants on the methane conversion, product selectivity, product ratio, and carbon deposition were investigated with 13wt% Ni/MgO catalyst in a fluidized bed reactor. With the fluidized bed reactor, $CH_4$ conversion was 91%, and Hz and CO selectivities were both 98% at 850$^{\circ}C$ and total flow rate of 100 mL/min. These values were higher than those of fixed bed reactor. From this result, we found that with the use of the fluidized bed reactor it was possible to avoid the disadvantage of fixed bed reactor (explosion) and increase the productivity of synthesis gas.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.105-113
• /
• 2014

Performance tests on $Ni/Ce-ZrO_2/Al_2O_3$ catalysts with additives (MgO, $La_2O_3$) were investigated in the combined reforming processes (SCR, ATR, TRM) in order to produce hydrogen and carbon monoxide (it is called "syngas".). The catalyst characterization was conducted using the BET surface analyzer, X-ray diffraction (XRD), SEM, TPR and TGA. The combined reforming process was developed to adjust the syngas ratio depending on the synthetic fuel (methanol, DME and GTL) manufacturing processes. Ni-based catalysts supported on alumina has been generally recommended as a combined reforming reaction catalyst. It was found that both free NiO and complexed NiO species were responsible for the catalytic activity in the combined reforming of methane conversion, and the $Ce-ZrO_2$ binary support employed had improved the oxygen storage capacity and thermal stability. The additives, MgO and $La_2O_3$, also seemed to play an important role to prevent the formation of the carbon deposition over the catalysts. The experimental results were compared with the equilibrium data using a commercial simulation tool (PRO/II).

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.812-822
• /
• 2006

This study amis to investigate the functional analysis of anode and cathode materials in Anode supported Solid Oxide Fuel Cell. The concentration polarization of single cell was investigated with CFD (Computational Fluid Dynamics) method for the case of the different morphology by using four types of unit cell and discussed to reduce the concentration polarization. The concentration polarization at anode side effected the voltage loss in Anode supported Solid Oxide Fuel Cell and increased contact areas between fuel gas and anode side could reduce the concentration polarization. For intermediate temperature operation, Anode-supported single cells with thin electrolyte layer of YSZ (Yttria-Stabilized Zirconia) were fabricated and short stacks were built and evaluated. We also developed diesel and methane autothermal reforming (ATR) reactors in order to provide fuels to SOFC stacks. Influences of the $H_2O/C$ (steam to carbon ratio), $O_2/C$ (oxygen to carbon ratio) and GHSV (Gas Hourly Space Velocity) on performances of stacks have been investigated. Performance of the stack operated with a diesel reformer was lower than with using hydrogen as a fuel due to lower Nernst voltage and carbon formation at anode side. The stack operated with a natural gas reformer showed similar performances as with using hydrogen. Effects of various reformer parameters such as $H_2O/C$ and $O_2/C$ were carefully investigated. It is found that $O_2/C$ is a sensitive parameter to control stack performance.