• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1330-1337
• /
• 2016

A visualization test of the fuel-coolant interaction in the Test for Real cOrium Interaction with water (TROI) test facility was carried out. To experimentally simulate the In-Vessel corium Retention (IVR)- External Reactor Vessel Cooling (ERVC) conditions, prototypic corium was released directly into the coolant water without a free fall in a gas phase before making contact with the coolant. Corium (34.39 kg) consisting of uranium oxide and zirconium oxide with a weight ratio of 8:2 was superheated, and 22.54 kg of the 34.39 kg corium was passed through water contained in a transparent interaction vessel. An image of the corium jet behavior in the coolant was taken by a high-speed camera every millisecond. Thermocouple junctions installed in the vertical direction of the coolant were cut sequentially by the falling corium jet. It was clearly observed that the visualization image of the corium jet taken during the fuel-coolant interaction corresponded with the temperature variations in the direction of the falling melt. The corium penetrated through the coolant, and the jet leading edge velocity was 2.0 m/s. Debris smaller than 1 mm was 15% of the total weight of the debris collected after a fuel-coolant interaction test, and the mass median diameter was 2.9 mm.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.137-146
• /
• 2016

This experiment was designed to assess the physical and chemical properties of growing media substituted with a range of increasing concentrations of pretreated wood and to relate these properties to plant growth responses. For preparing the growing media, each material was combined with rural soil, peat, perlite and pretreated wood. Physicochemical properties studied were similar to ideal substrate ranges for plant growth on growing media, including pretreated wood. Physical properties were also well maintained over time. In comparison to plants growing in 100% rural soil, tall fescue(Festuca arundinacea) in the prepared growing media achieved better growth, especially when using the 50% rural soil + 50% PPW(peat + perlite + pretreated wood, 3:1:6(w/w/w)) and 30% rural soil + 70% PPW (peat + perlite + pretreated wood, 3:1:6(w/w/w)), and showed improved germination percentage. We confirmed the potential use of growing media, including pretreated wood. Furthermore, our results show a correlation among the physicochemical properties of tall fescue(Festuca arundinacea); physical properties were significantly influenced by germination and aerial parts. The root length of physicochemical properties was correlated with bulk density and organic compound (p<0.01).

• Journal of Nutrition and Health
• /
• v.36 no.1
• /
• pp.9-17
• /
• 2003

The preparation method of a soluble dietary fiber from oak wood (Quercus mongolica) and the effect of the soluble dietary fiber on physiological function in rat fed high cholesterol diets was investigated. The best condition for steam explosion method was 25 kgf/㎤ pressure for 6 min. The exploded samples were delignified by the filtration treatment with 1% NaOH for several times, which is the best condition. The enzymatic hydrolysis of Cellusoft cellulase was more effective than Onozuka R-10 cellulase. The manufactured soluble dietary fiber was assayed using gel permeation chromatography (GPC) and it was dissolved in water. Average molecular weight distribution of manufactured soluble dietary fiber was about 348-1,200 and it was assumed the oligomer form fraction. In order to compare the manufactured soluble dietary fiber with commercial soluble dietary fiber (pectin) on the physiological function, Sprague-Dawley male rats weighing 100$\pm$10 g were randomly assigned to one normal diet and five high cholesterol diet containing 1% cholesterol. The high cholesterol diet groups were classified to fiber free diet (FF group), 5% pectin (5P group), 10% pectin (l0P group), 5% manufactured soluble dietary fiber (5M group) and 10% manufactured soluble dietary fiber (10M group). Body weight gains in all soluble dietary fiber groups were lower than FF group. Food intakes were increased in all soluble dietary fiber groups than that of FF group. Food efficiency ratio (FER) was significantly decreased in all soluble dietary fiber groups than that of the FF group, and it was especially was highest in 10% supplemented soluble dietary fiber group. The weight of liver of the soluble dietary fiber supplemented groups were lower than those of the FF group, but weights of cecum and small intestine of all supplemented soluble dietary fiber groups were significantly increased, compared with that of FF group. The weights and water contents in feces were significantly increased by the soluble dietary fiber. The activity of the glutamic oxaloacetic transaminase in soluble dietary fiber groups were significantly decreased than those of FF group. The hepatic glutathione S-transferase activity in all soluble dietary fiber supplemented groups were higher than that of FF group. The physiological effects of the manufactured soluble dietary fiber are the same as the commercial soluble dietary fiber (pectin). The preparation method of the soluble dietary fiber from the oak chips suited to its purpose. (Korean J Nutrition 36(1) : 9~17, 2003)

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.88-101
• /
• 2008

The aim of this study was to attempt the efficacy of antifungal activity of the wood extracts against Botrytis grey mold. Wood chip derived from Quercus mongolica was obtain from steam explosion process and extracted by hot water and methanol and ethanol. The conidial germination was maximum growth with the application temperature for 20 and $25^{\circ}C$. In pH test, we observed the maximum growth in pH 5.0 and 7.0. Antifungal activity was the best in the hot water extractives against Botrytis cinerea. The separation of the antifungal substances was performed using a silica-gel column (n-hexane : chloroform : ethyl acetate : formic acid = 12 : 17 : 8 : 0.2, v/v/v/v), TLC and UV-Spectrophotometer, and isolated 6 fraction group. The result of antifungal activity in 6 fraction group, fraction group I and fraction group II were the highest antifungal activity against grey mold with the present study. Three peaks in fraction group I and II were detected by HPLC and this compounds were suppose to effective of antifungal activity.

• Composites Research
• /
• v.29 no.1
• /
• pp.40-44
• /
• 2016

Nuclear fuel cladding used in a nuclear power plant must possess superior oxidation resistance in the coolant atmosphere of high temperature/high pressure. However, as was the case for the critical LOCA (loss-of-coolant accident) accident that took place in the Fukushima disaster, there is a risk of hydrogen explosion when the nuclear fuel cladding and steam reacts dramatically to cause a rapid high-temperature oxidation accompanied by generation of a huge amount of hydrogen. Hence, an active search is ongoing for an alternative material to be used for manufacturing of nuclear fuel cladding. Studies are currently aimed at improving the safety of this cladding. In particular, ceramic-based nuclear fuel cladding, such as SiC, is receiving much attention due to the excellent radiation resistance, high strength, chemical durability against oxidation and corrosion, and excellent thermal conduction of ceramics. In the present study, cladding with $SiC_f/SiC$ protective films was fabricated using a process that forms a matrix phase by polymer impregnation of polycarbosilane (PCS) after filament-winding the SiC fiber onto an existing Zry-4 cladding tube. It is analyzed the oxidation and microstructure of the metal cladding with $SiC_f/SiC$ composite protective films using a drop tube furnace for thermal shock test.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.1-14
• /
• 1998

Dangsanbong volcano, which is located on the coast of the western promontory of Cheju Island, occurs in such a regular pattern on the sequences which represent an excellent example of an eruptive cycle. The volcano comprises a horseshoe-shaped tuff cone and a younger nested cinder cone on the crater floor, which are overlain by a lava cap at the top of the cinder cone, and wide lava plateau in the moat between two cones and in the northern part. The volcanic sequences suggest volcanic processes that start with Surtseyan eruption, progress through Strombolian eruption and end with Hawaiian eruption, and then are followed by rock fall from sea cliff of the tuff cone and by air fall from another crater. It is thought that the eruptive environments of the tuff cone could be mainly emergent because the present cone is located on the coast, and standing body of sea water could play a great role. It is thought that the now emergent part of the tuff cone was costructed subaerially because there is no evidence of marine reworking. The emergent tuff cone is characterized by distinctive steam-explosivity that results primarily from a bulk interaction between rapidly ascending magma and external water. The sea water gets into the vent by flooding accross or through the top or breach of northern tephra cone. Dangsanbong tuff cone was constructed from Surtseyan eruption which went into with tephra finger jetting explosion in the early stage, late interspersed with continuous upruch activities, and from ultra-Surtseyan jetting explosions producting base surges in the last. When the enclosure of the vent by a long-lived tephra barrier would prevent the flooding and thus allow the vent to dry out, the phreatomagmatic activities ceased to transmit into magmatic activity of Strombolian eruption, which constructed a cinder cone on the crater floor of the tuff cone Strombolian eruption ceased when magma in the conduit gradually became depleted in gas. In the Dangsanbong volcano, the last magmatic activity was Hawaiian eruption which went into with foundation and effusion of basalt lava.