• Water for future
• /
• v.17 no.1
• /
• pp.31-36
• /
• 1984

This study has performed to investigate and evaluate the simulation model of steam Water Quality and the simulated results have 매내 been compared with the observed data in the Han River. The predicted BOD, Total-N, Coliform concentrations in the downstream of the Chungrang-Cheon are 8.6m/1, 4.5mg/1 and $3.7X10^5$ respectively. It is interesting to note that the results simulated based on the WQRRS model are extremely in good agreement and also are very much comparable with those observed data reported previously references.

• Korean journal of food and cookery science
• /
• v.5 no.2
• /
• pp.35-41
• /
• 1989

This study was written to assess microbilogical quality by passage of time and holding method after making foods, by means of evaluating time, temperature and microbiological quality during vairous phases in product flow of hard-boiled mackerel served by an industry feeding operation for 500 persons a day, measuring pH & Aw and analyzing factors affecting nicrobiological growth conditions. The results were as fallows: 1. According to phases in product flow of hard-boiled mackerel, it showed 4.9 hours of mean of needed time, $27.5^{\circ}C$ of room temperature, 4.8~5.7 of pH value and 0.95~0.98 of Aw. these conditions were suitable for microbiological growth, and the phases with potential hygienic danger were pre-preparation and assembly & service. 2. As for holding methods and passage of time, holding as steam table was more effective than holding at room temperature as time past. 3. Food poisoning bacteria were not dectected from phases in product flow of hard-boiled mackerel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.64-70
• /
• 2012

Two kinds of eddy current probes are mainly used to perform the steam generator tube integrity assesment in NPPs. The first one is the bobbin probe using for inspection of volumetric defect like a fretting wear. The second one is the rotating probe using for inspection of non-volumetric defect like a crack. The eddy current probe is one of the essential components which consist of the whole eddy current examination system, and provides a decisive data for the tube integrity in accordance with acceptance criteria described in specific procedures. The design of ECT probe is especially important to improve examination results because the quality of acquired ECT data is depended on the probe design characteristics, such as coil geometry, electrical properties, operation frequency. In this study, it is analyzed that the coil winding number of differential bobbin probe affects the electrical properties of the probe. Eddy current bobbin probes for the steam generator tubes in NPPs are designed and fabricated according to the results. Experiment shows that the change in coil winding number has much effects on the optimum inspection frequency determined by the tube geometry and material. Therefore, the coil winding number in bobbin probe is very important in the probe design. In this study, a basis of the coil winding number for the eddy current bobbin probe design for steam generator tubes in NPPs is established.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.169-174
• /
• 2002

We can consider that the study on early evaluation of compressive strength and durability of concrete is useful to raise safety of quality control of concrete. In this paper, was proposed to method early to predict strength and durability of concrete with parameter, such as Water/cement(W/C) ratio and steam curing conditions. Through analyzing the relationship between the compressive strength and the amount of chloride penetration into concrete specimens, a new formula early estimating durability of the concrete structure was suggested.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.76-81
• /
• 2016

Recycled aggregate is a valuable resource in Korea in lack of natural aggregate. Government recognizes the importance and suggests various policies enhancing its use for higher value-added application. Most of recycled aggregate produced currently in Korea, however, is applied for low value-added uses such as embankment, reclamation, etc. Its higher valued application such as for structural concrete is very limited. Although domestic manufacturing technology of recycled aggregate is at the world level, recycled aggregate is not applied for structural concrete. Primary reasons for the limited use of the recycled aggregate include bonded mortar and cracks occurred during crushing and hence it is very difficult to predict and control the quality of recycled aggregate concrete. This research intended to grasp combined characteristics of recycled aggregate, high early strength cement, maximum temperature and time duration of steam curing and then, analyze the effects of factors. Also, it suggested the method to improve field applicability of recycled aggregate concrete.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.8-17
• /
• 1999

Unfortunately leaks occur in heat exchangers periodically, usually at the tube to tubeplate joint. The usual method of repair is to plug off the defective area and isolate the tubes of concern from the circuit. If the leaks continua the thermal capacity of the units is progressively reduced and for this reason the alternative of using an internal bridging sleeve has been examined. This paper discusses the overall development activities that has been found necessary to bring this repair procedure to a successful conclusion for use on the nuclear steam generator. In this work we have investigated optimum explosives and explosive quality, explosive sleeving's thickness, the design of sheath stress relieving heat treatment pull-out load, hydraulic leakage, stress corrosion cracking properties. The results obtain are as follows : (1) The optimum explosives and explosive qualities are PETN and about 15~40 gr/ft of explosive sleeving in nuclear steam generator. (2) Explosive sleeving's thickness is 1.1~l.4mm, If groove of 0.35mm formed in sleeve outside existed, For the hydraulic leakage is go up, explosive sleeving of formed groove are applicate tube and turnplate. (3) If the stress relieving heat treatment are experiment in $750^\circ{C}$, $850^\circ{C}$, 15 minutes Pull-out strength of sleeving 1,500~2,300kg, hydraulic leakage is $250kg/cm^2$.

• Journal of Information Technology Applications and Management
• /
• v.28 no.1
• /
• pp.53-61
• /
• 2021

The year 2020 was a time when the coronavirus infections-19 (COVID-19) caused various changes in society. In particular, the fields that have been conducted face-to-face have been greatly confused by the transition to an online non-face-to-face method, and this is the case with the field of education. There are two main advantages of offline education. The first is that we can improve our understanding through communication with teachers, and the second is that we can develop social skills through interaction with friends. But as online classes progressed due to corona 19, interaction could not be achieved. As a result, the motivation for learning has been reduced due to difficulties in real-time feedback, and the participation rate has been significantly lowered, especially in lower grades, raising concerns about the learning gap that will occur after corona 19. However, there are some cases in which online classes were conducted as effectively as offline classes by utilizing various contents. What they have in common is the use of content. Teachers generally improved the quality of education by linking interesting sights and videos that enhance learning comprehension. The provided video conveys learning-related content into stories, enabling intuitive observation. Many students were already enjoying these videos through VOD (Video on Demand) such as TV and YouTube, they were able to connect their easy access to content and interest in learning. Appropriate use of video content has rather increased the learning effect and should continue after corona 19. Therefore, it is necessary to study methodologies that apply video content efficiently to education. This study looked at the steps that needed content application through the development of education programs, and observed its meaning. Students were curious about the content, motivated to learn and participated in learning on their own. Intuitive learning, conducted through appreciation, play and content production, provided an opportunity to learn on their own in everyday life.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.05a
• /
• pp.35-45
• /
• 2009

Reservoir Characterization (RC) using 3-D seismic attributes analysis can provide properties of the oil sand reservoirs, beyond seismic resolution. For example, distributions and temporal bed thicknesses of reservoirs could be characterized by Spectral Decomposition (SD) and additional seismic attributes such as wavelet classification. To extract physical properties of the reservoirs, we applied 3-D seismic attributes analysis to the oil sand reservoirs in McMurray formation, in BlackGold Oilsands Lease, Alberta Canada. Because of high viscosity of the bitumen, Enhanced Oil Recovery (EOR) technology will be necessarily applied to produce the bitumen in a steam chamber generated by Steam Assisted Gravity Drainage (SAGD). To optimize the application of SAGD, it is critical to identify the distributions and thicknesses of the channel sand reservoirs and shale barriers in the promising areas. By 3-D seismic attributes analysis, we could understand the expected paleo-channel and characteristics of the reservoirs. However, further seismic analysis (e.g., elastic impedance inversion and AVO inversion) as well as geological interpretations are still required to improve the resolution and quality of RC.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.4
• /
• pp.71-80
• /
• 2018

In this paper, we developed an interactive animation authoring tool and developed the Android based interactive edutainment contents. The authoring tool for creating interactive animations developed in this paper is based on a graphical user interface, so users can easily create interactive animations. Interactive animation contents created by this authoring tool can be created as images and xml files so that they can be used directly on mobile devices. In order to increase learning efficiency for children, Android-based interactive edutainment electronic storybooks, which is implemented using this authoring tool, provided a recording function to listen to the parents' voice as well as an interactive action in which the characters move in accordance with the story line. We also provided a STEAM game that combines creativity and imagination with creative science and technology. Therefore, by creating the edutainment contents through the proposed authoring tool for interactive animation, various interactive animation contents could be produced more easily than the code implementation method. Through this study, I hope that it will be helpful for the development of various interactive edutainment contents to provide educational contents considering the quantity and quality to infants.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.