• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.375-380
• /
• 2003

기존의 속도센서가 없는 유도전동기의 고정자자속 기준제어에서 추정된 속도가 이산화 될 때, 이산화에 의한 모델링오차 때문에 회전자속도 추정에 오차가 발생한다. 이 오차는 저역통과필터에 의해 제거되지만 추정된 속도는 과도상태에서 지연이 발생해서 약계자영역으로의 천이가 지연되는 문제가 발생하게 된다. 본 논문에서는 기존의 고정자자속 기준제어 속도 센서리스 시스템의 약계자영역에서 추정된 속도의 지연으로 발생하는 문제점을 고찰하고 또한 루엔버거관측기를 사용하여 정확한 속도 추정을 학 수 있는 방법을 제안한다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.38-46
• /
• 2015

This paper propose a variable parameter estimations for variable over current load of five-phase squirrel-cage induction motor(IM) to servo control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, torque command of current components, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental within variable over current load at rated input frequency. There are results of stator winding measurement, no-load test, locked-rotor test, variable over current load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.241-247
• /
• 2014

This paper propose a variable parameter estimations of five-phase squirrel-cage induction motor(IM) for speed control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental of variable input power frequency. There are results of stator winding test, no-load test, locked-rotor test, variable actual load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.405-408
• /
• 2001

This paper investigates the problem of the speed estimation of conventional speed sensorless stator flux-oriented induction machine drive in the field weakening region and proposes a new speed estimation scheme to estimate speed exactly in transients in the field weakening region. The error included in the estimated rotor speed is removed by not a low pass filter but Kalman filter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.130-131
• /
• 2014

집중권 5상 유도전동기에서 기본파 $d_1-q_1$와 3고조파 $d_3-q_3$ 공간의 비동기화시 자속밀도의 파형이 왜곡되어 자속이 포화되고 철손이 증가한다. 이러한 현상을 방지하기 위해 두 좌표축의 동기화가 필요하다. 본 논문에서는 자속각의 동기화를 고려한 고정자 자속기준 벡터제어를 제안하고 시뮬레이션을 통하여 그 유효성을 입증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2117-2119
• /
• 1997

Several methods of induction motor drives, which use speed estimators instead of shaft encoders, have been reported. However, the sensorless field oriented control employing stator voltages and currents has difficulty in estimating rotor flux in the low-speed range. This paper investigates the rotor flux estimator which replace integrators with two lag circuits. The experimental results indicate good speed responses.

• 대한전기학회논문지
• /
• 제40권6호
• /
• pp.567-573
• /
• 1991

Full direct digital control of induction motor driver is implemented with a minimal hardware structure. This paper deals with the presentation of a low-cost single-chip microprocessor-based control system for three-phase PWM generation and vector control that control speed of the induction motor using the field-oriented control method. Rotor flux is estimated using the indirect sensing method based on the rotor circuit equation in the synchronously rotation reference frame, and slip angle and rotor position are calculated from rotor angular velocity and stator current. Through simulation and experiment, it is shown that the proposed scheme gives good static and dynamic performance to the induction motor drive.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.466-469
• /
• 2001

In this paper, closed loop V/f control of induction motor has been implemented by the estimated speed. Closed loop V/f control improve the performance of induction motor drive system at low speed compared to open loop V/f control. However, closed loop V/f control need speed sensor. By using the estimated speed, closed loop V/f control is possible without speed sensor. Rotor speed is calculated from the difference between synchronous frequency and slip angular frequency. 3-phase voltage reference is obtained from synchronous frequency. And the PWM technique using space vector PWM is applied in this scheme. In the space vector PWM, effective time of 3-phase voltage reference is used to simplify the calculation of effective voltage time. This scheme is simple to implement and one chip microprocessor was used in experimental system.

• 한국정보통신학회논문지
• /
• 제4권2호
• /
• pp.487-492
• /
• 2000

본 논문은 유도전동기 간접 벡터 제어시 회전자 시정수 변동에 대한 슬립보상 방법을 제안하였다. 회전자 시정수가 변동하면 고정자 전류의 자속 및 토크 성분의 상호 간섭이 발생하여 벡터제어가 불가능하고 성능이 저하하게 된다. 이를 해결하기 위하여 본 논문에서는 실제 자속 성분과 기준 자속 성분을 비교하여 위상차 없이 자속 성분을 기준 좌표의 q축에 일치시키고 PI 제어기를 이용하여 슬립을 보상하는 방법을 제시하였다. 제안된 방법을 이용하면 유도전동기의 회전자 저항 변동시 q축 자속 성분이 0이 되어 적정 슬립이 유지되고 정확한 벡터제어가 실현된다. 제안된 알고리즘의 타당성을 컴퓨터 시뮬레이션과 실험을 통하여 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1122_1123
• /
• 2009

Doubly Fed Induction Generator (DFIG) used in variable speed constant frequency wind energy generation system can capture wind energy with the highest efficiency by using the stator flux oriented vector control method. This paper sets up a DFIG modeling of wind generation system in PSCAD/EMTDC to simulate the operational performance with wind speed variation. In order to achieve the characteristics of the maximum utilization of wind power, this paper uses the vector control technology to track largest wind power and the independent control of generator active and reactive power.