• Korean Journal of Optics and Photonics
• /
• v.22 no.4
• /
• pp.161-169
• /
• 2011

In this paper, a tolerance allocation method using Monte-Carlo simulation with measured reflective eccentricity for high-sensitive IR optics is proposed. During optics fabrication and alignment, reflective eccentricity was measured using an optical centration measurement instrument. A Monte-Carlo simulation was performed using measured eccentricity data, and it gives statistical estimated performance of the optics after fabrication. The validity of the proposed tolerance allocation method was verified comparing the estimated MTF result with the measured MTF result of the fabricated optics.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.551-555
• /
• 2017

Tissue optics is a well-established and extensively studied area. In the last decades, Monte Carlo simulation (MCS) has been one of the standard tools for simulation of light propagation in turbid media. The utilization of parallel processing exhibits dramatic increase in the speed of MCS's of photon migration. Some calculations based on MCS can be completed within a few seconds. Since the MCS's have the potential to become a real time calculation method, a dynamic accuracy estimation, which is also known as history by history statistical estimators, is required in the simulation code to automatically terminate the MCS as the results' accuracy achieves a high enough level. In this work, spatial and time-domain GPU-based MCS, adopting the dynamic accuracy estimation, are performed to calculate the light dose/reflectance in homogeneous and heterogeneous tissue media. This dynamic accuracy estimation can effectively derive the statistical error of optical dose/reflectance during the parallel Monte Carlo process.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.209-215
• /
• 2011

A new iterative algorithm is developed to estimate LIDAR ratio for a thin cirrus cloud over an aerosol layer. First, the thin cirrus cloud is screened out and replaced by a modeled LIDAR signal and the extinction coefficients of the aerosol layer are derived using the Fernald backward method. These aerosol coefficients are referred as the "actual values". Second, the original LIDAR signal which includes the thin cirrus cloud is also inverted by the Fernald backward method down to the aerosol layer but using different LIDAR ratio for the thin cirrus cloud. Depending on the different assumptions about the LIDAR ratio of the thin cirrus cloud, different sets of aerosol extinction can be derived. The "actual values" which are found in the first step can be used to constrain this iterative progress and the correct LIDAR ratio of the thin cirrus cloud can be found. The detailed description of this method and retrieval examples are given in the paper. The cases compared with other methods are presented and the statistical result is also shown and agrees well with other studies.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.167-176
• /
• 2022

Adaptive optics (AO) systems compensate for atmospheric disturbance, especially phase distortion, by introducing counter-wavefront deformation calculated from real-time wavefront sensing or prediction. Because AO system implementations are time-consuming and costly, it is highly desirable to estimate the system's performance during the development of the AO system or its parts. Among several techniques, we mostly apply statistical analysis, computational simulation, and optical-bench tests. Statistical analysis estimates performance based on the sum of performance variances due to all design parameters, but ignores any correlation between them. Computational simulation models every part of an adaptive optics system, including atmospheric disturbance and a closed loop between wavefront sensor and deformable mirror, as close as possible to reality, but there are still some differences between simulation models and reality. The optical-bench test implements an almost identical AO system on an optical bench, to confirm the predictions of the previous methods. We are currently developing an AO system for a 1.6-m ground telescope using a deformable mirror that was recently developed in South Korea. This paper reports the results of the statistical analysis and computer simulation for the system's design and confirmation. For the analysis, we apply the Strehl ratio as the performance criterion, and the median seeing conditions at the Bohyun observatory in Korea. The statistical analysis predicts a Strehl ratio of 0.31. The simulation method similarly reports a slightly larger value of 0.32. During the study, the simulation method exhibits run-to-run variation due to the random nature of atmospheric disturbance, which converges when the simulation time is longer than 0.9 seconds, i.e., approximately 240 times the critical time constant of the applied atmospheric disturbance.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.27-31
• /
• 2009

Purpose: The purpose of this study was to document the importance of work capability and the educational needs for optometric duty. Methods: Questionnaires were distributed to 813 optometrists and 89 full-time faculties on nation wide in July, 2008. Results: Statistical analysis showed that high mean of 3.53, maximum of 4, for the importance of work capability, and 3.46 for the educational needs as for the total optometric duty. Especially, optometric dispensing was the highest on the importance of work capability and the educational needs, where as medical ethics and optometric jurisprudence and business management was the lowest. Conclusions: Both optometrists and full-time faculties agreed to the importance of work capability and the educational needs, and therefore it should be reflected in optometric education program.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.71-79
• /
• 2018

For 299 patients who had undergone cataract surgeries we investigated the difference in visual acuity and refractive power before and after cataract surgery and the clinical change of the visual acuity and the refractive power according to age, gender, hospital visit time and specific medical history. We found the factors affecting preoperative and postoperative outcomes of the cataract patients in metropolitan hospitals by input, process, and outcome and analyzed medical characteristics and patient characteristics as the input variables. T-test and ANOVA have been performed for statistical analysis of functional status, and general status and the technical characteristic as the process variable and the outcome variable of diagnosis. Visual acuity improved significantly in patients who had undergone cataract surgery. However, the change in refractive power did not show a statistically significant difference but only a slight difference. The improvement of male patients was greater than that of female patients. The difference in age was more effective in patients under 50 years old and the effect of cataract surgery was relatively high in patients without the presence of specific medical history. Cataract surgery did not seem to help all of the patients, but it is more effective in improving visual acuity and refractive power. We conclude that simultaneous cataract surgery in both eyes is reasonable in order to have at least the better effect.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2018

To measure atmospheric temperature, water vapor, and aerosol simultaneously, an efficient multi-function Raman lidar using an ultraviolet-wavelength laser has been developed. A high-performance spectroscopic box that utilizes multicavity interference filters, mounted sequentially at small angles of incidence, is used to separate the lidar return signals at different wavelengths, and to extract the signals with high efficiency. The external experiments are carried out for simultaneous detection of atmospheric temperature, water vapor, and aerosol extinction coefficient in Beijing, under clear and hazy weather conditions. The vertical profiles of temperature, water vapor, and aerosol extinction coefficient are analyzed. The results show that for an integration time of 5 min and laser energy of 200 mJ, the mean deviation between measurements obtained by lidar and radiosonde is small, and the overall trend is similar. The statistical temperature error for nighttime is below 1 K up to a height of 6.2 km under clear weather conditions, and up to a height of 2.5 km under slightly hazy weather conditions, with 5 min of observation time. An effective range for simultaneous detection of temperature and water vapor of up to 10 km is achieved. The temperature-inversion layer is found in the low troposphere. Continuous observations verify the reliability of Raman lidar to achieve real-time measurement of atmospheric parameters in the troposphere.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.150-155
• /
• 2016

To evaluate the autofocusing performance of recent mobile phone cameras, it is necessary to determine the peak position of the center field MTF (Modulation Transfer Function), -known as the through focus MTF- of the module. However, the MTF peak position found by conventional methods deviates from the ideal position due to the focus scanning resolution of mobile phone cameras. This inaccurate peak position results in false judgements of the optical performance, leading to yield losses or customer complaints. An increase in the focus scanning resolution can address this problem, but the manufacturing UPH (Unit per Hour) level will also unfortunately increase as well, resulting in a loss of manufacturing capabilities. In this paper, several fitting models are studied to find an accurate MTF peak position within a short period of time. With an analysis of a large amount of manufacturing data, it is demonstrated that the fitting methods can reduce false judgements and simultaneously increase the capabilities of the manufacturing system.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.259-269
• /
• 2024

Optical imaging systems that operate through atmospheric pathways often suffer from image degradation, mainly caused by the distortion of light waves due to turbulence in the atmosphere. Adaptive optics technology can be used to correct the image distortion caused by atmospheric disturbances. However, there are challenges in conducting experiments with strong atmospheric conditions. An optical phase plate (OPP) is a device that can simulate real atmospheric conditions in a lab setting. We suggest a novel two-step process to fabricate an OPP capable of simulating the effects of atmospheric turbulence. The proposed fabrication method simplifies the process by eliminating additional activities such as phase-screen design and phase simulation. This enables an efficient and economical fabrication of the OPP. We conducted our analysis using the statistical fluctuations of the refractive index and applied modal expansion using Kolmogorov's theory. The experiment aims to fabricate an OPP with parameters D/r₀ ≈ 30 and r₀ ≈ 5 cm. The objective is defined with the strong atmospheric conditions. Finally, we have fabricated an OPP that satisfied the desired objectives. The OPP closely simulate turbulence to real atmospheric conditions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.363-373
• /
• 2011

Purpose: To establish basic data for effective management and quality improvement on clinical practice by investigating the clinical practice satisfaction of ophthalmic optics students and optical shop owners. Methods: A survey was administered for 281 students with experience in clinical practices and 105 optical shop owners regarding satisfaction of ophthalmic optics students and optical shops. And a statistical analysis was performed on the survey results. Results: 92.% (97 shops) of optical shop owners responded that clinical practice was necessary and there was a significant difference (p=0.004) according to gender. 4 weeks was the preferred length of practice period (53.3%) and there was a significant difference according to the size of the optical shops (p=0.000). Clinical practice satisfaction of students was 3.50 ${\pm}$ 0.68 and satisfaction for clinical practice program, clinical practice time and clinical practice shop (3.74 ${\pm}$ 0.80) were the highest and there was a significant difference according to the age of the students (p<0.05). Clinical practice satisfaction for optical shops was 4.08 ${\pm}$ 0.64 which is higher than student satisfaction. Satisfaction for clinical practice program was (4.17 ${\pm}$ 0.54) was the highest. Conclusions: To maximize the effects of clinical practice, a clinical practice program reflecting the satisfaction of students and optical shops is required and further research and attention are required.