• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.143-148
• /
• 2005

The main purpose of this study is to suggest and evaluate an operational method for assessing the potential impact of climate change on hydrologic components and water resources of regional scale river basins. The method, which uses large scale climate change information provided by a state of the art general circulation model(GCM) comprises a statistical downscaling approach and a spatially distributed hydrological model applied to a river basin located in Korea. First, we construct global climate change scenarios using the YONU GCM control run and transient experiments, then transform the YONU GCM grid-box predictions with coarse resolution of climate change into the site-specific values by statistical downscaling techniques. The values are used to modify the parameters of the stochastic weather generator model for the simulation of the site-specific daily weather time series. The weather series fed into a semi-distributed hydrological model called SLURP to simulate the streamflows associated with other water resources for the condition of $2CO_2$. This approach is applied to the Yongdam dam basin in southern part of Korea. The results show that under the condition of $2CO_2$, about $7.6\% of annual mean streamflow is reduced when it is compared with the observed one. And while Seasonal streamflows in the winter and autumn are increased, a streamflow in the summer is decreased. However, the seasonality of the simulated series is similar to the observed pattern and the analysis of the duration cure shows the mean of averaged low flow is increased while the averaged wet and normal flow are decreased for the climate change.

• Clinical and Experimental Reproductive Medicine
• /
• 제29권4호
• /
• pp.251-258
• /
• 2002

Objective : The aim of this study was to evaluate the outcomes of the GnRH antagonist (Cetrotide) minimal stimulation protocol comparing with GnRH agonist combined long step down stimulation protocol in PCOS patients. Materials and Method: From Apr 2001 to May 2002, 22 patients (22 cycles) were performed in controlled ovarian hyperstimulation using by GnRH antagonist and GnRH agonist for PCOS patients. GnRH antagonist (Cetrotide) combined minimal stimulation protocol was administered in 10 patients (10 cycles, Study Group) and GnRH agonist long step down stimulation protocol was administered in 12 patients (12 cycles, Control Group). We compared the pregnancy rate/cycle, total FSH (A)/cycle, Retrieved oocyte/cycle, the incidence of ovarian hyperstimulation syndrome, multiple pregnancy rate between the two groups. Student-t test were used to determine statistical significance. Statistical significance was defined as p<0.05. Results: Group of GnRH antagonist (Cetrorelix) minimal stimulation protocol produced fewer oocytes (6.4 versus 16.3 oocytes/cycle) using a lower dose of FSH (22.2 versus 36.1 Ample/cycle) and none developed OHSS and multiple pregnancy. Although the trends were in favour of the GnRH antagonist (Cetrorelix) protocol, the differences did not reach statistical significance. This was probably due to small sample size. Conclusion: The use of GnRH antagonist reduce the risk of ovarian hyperstimulation and multiple pregnancy. We suggest that GnRH antagonist might be alternative controlled ovarian hyperstimulation method, especially in PCOS patients who will be ovarian high response.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.6033-6038
• /
• 2015

Background: Experience of lung cancer includes negative impacts on both physical and psychological health. Pain is one of the negative experiences of lung cancer. Cognitive behavioral therapy techniques are often recommended as treatments for lung cancer pain. The objective of this review was to synthesize the evidence on the effectiveness of cognitive behavioral therapy techniques in treating lung cancer pain. This review considered studies that included lung cancer patients who were required to 1) be at least 18 years old; 2) speak and read English or Thai; 3) have a life expectancy of at least two months; 4) experience daily cancer pain requiring an opioid medication; 5) have a positive response to opioid medication; 6) have "average or usual" pain between 4 and 7 on a scale of 0-10 for the day before the clinic visit or for a typical day; and 7) able to participate in a pain evaluation and treatment program. This review considered studies to examine interventions for use in treatment of pain in lung cancer patients, including: biofeedback, cognitive/attentional distraction, imagery, hypnosis, and meditation. Any randomized controlled trials (RCTs) that examined cognitive behavioral therapy techniques for pain specifically in lung cancer patients were included. In the absence of RCTs, quasi-experimental designs were reviewed for possible conclusion in a narrative summary. Outcome measures were pain intensity before and after cognitive behavioural therapy techniques. The search strategy aimed to find both published and unpublished literature. A three-step search was utilised by using identified keywords and text term. An initial limited search of MEDLINE and CINAHL was undertaken followed by analysis of the text words contained in the title and abstract, and of the index terms used to describe the article. A second search using all the identified keywords and index terms was then undertaken across all included databases. Thirdly, the reference list of all identified reports and articles were searched for additional studies. Searches were conducted during January 1991- March 2014 limited to English and Thai languages with no date restriction. Materials and Methods: All studies that met the inclusion criteria were assessed for methodological quality by three reviewers using a standardized critical appraisal tool from the Joanna Briggs Institute (JBI). Three reviewers extracted data independently, using a standardized data extraction tool from the Joanna Briggs Institute (JBI). Ideally for quantitative data meta-analysis was to be conducted where all results were subject to double data entry. Odds ratios (for categorical data) and weighted mean differences (for continuous data) and their 95% confidence intervals were to be calculated for analysis and heterogeneity was to be assessed using the standard Chi-square. Where statistical pooling was not possible the finding were be presented in narrative form. Results: There were no studies located that met the inclusion requirements of this review. There were also no text and opinion pieces that were specific to cognitive behavioral therapy techniques pain and lung cancer patients.Conclusions: There is currently no evidence available to determine the effectiveness of cognitive behavioural therapy techniques for pain in lung cancer patients.

• 한국콘텐츠학회논문지
• /
• 제8권9호
• /
• pp.259-273
• /
• 2008

경제의 발전과 더불어 산업사회가 고도화 되면서 국민소득의 증가, 여가시간의 증가, 여성의 취업 증가 등의 변화에 따라 국민의 생활수요도 다양해지고 있다. 이러한 수요의 변화에 따라 서비스 산업은 여러 형태로 발전하면서 오늘날 현대 경제는 서비스 경제 또는 서비스 사회라고도 불리어 지고 있다. 이는 서비스 산업이 경제 전체에서 차지하는 비중이 확대되고 서비스 산업의 범위가 넓어지고 있고 현대사회에서 서비스 산업의 중요성이 크게 부각되고 있기 때문이다. 이러한 서비스 산업의 경우 최근 경쟁이 치열해지고 브랜드에 대한 충성도가 감소함에 따라 신규고객 유치와 시장점유율 확대 등의 공격적 마케팅전략 보다는 기존고객 유지의 방어적 마케팅 전략의 중요성이 커지고 있다. 특히 여행사와 항공사의 경우 많은 경쟁과 성수기, 비수기의 수요 양극화 현상 등으로 인하여 서비스전환의 용이성이 증가함에 따라 기존 고객을 유지하고 전환을 억제하는 것이 더욱 중요시되고 있는 실정이다. 이에 본 연구는 고객특성에 따른 전환장벽과 전환의도 그리고 재방문 의사의 관계에 대하여 연구하여 업계에 도움이 되는 시사점을 찾고자 하였다.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.196-203
• /
• 2011

PURPOSE. This study evaluated marginal fit of glass infiltrated alumina cores fabricated using two techniques and their marginal stability after firing cycles of veneering porcelain. MATERIALS AND METHODS. Fifteen standardized all-ceramic crowns were fabricated on a metal die using each technique: slip cast technique of VITA In-Ceram sprint Alumina (Group A as control) and plastic foil matrix technique of Turkom-Cera fused alumina core system (Group B). Copings were compared between groups and within groups at coping stage and after firing each layer of veneering porcelain. A device was used to standardize seating of copings on the metal die and positioning of the specimens under the microscope after each stage of fabrication. The specimens were not cemented and marginal gap was measured using an image analyzing software (Imagepro Express) on the photographs captured under an optical microscope. Two tailed unpaired 't test' was used to compare marginal gaps in two groups and one way ANOVA was used to analyze marginal distortion within each group at 95% confidence interval. RESULTS. The marginal gap was smaller at the coping stage in group B ($60+30{\mu}M$) than group A ($81+21{\mu}M$) with statistical significance. After firing of veneering porcelain the difference was insignificant. At the final stage, both groups exhibited lower mean marginal gaps than at the initial coping stage with the difference of $11.75{\mu}M$ for group A and $11.94{\mu}M$ for group B, but it was statistically insignificant due to high value of standard deviation. CONCLUSION. Within the limitations of this study, it was concluded that both techniques produced copings with comparable and acceptable marginal fit and marginal stability on firing veneering porcelain.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1172-1180
• /
• 2004

Recently, the gene expression data, product of high-throughput technology, appeared in earnest and the studies related with it (so-called bioinformatics) occupied an important position in the field of biological and medical research. The microarray is a revolutionary technology which enables us to monitor several thousands of genes simultaneously and thus to gain an insight into the phenomena in the human body (e.g. the mechanism of cancer progression) at the molecular level. To obtain useful information from such gene expression measurements, it is essential to analyze the data with appropriate techniques. However the high-dimensionality of the data can bring about some problems such as curse of dimensionality and singularity problem of matrix computation, and hence makes it difficult to apply conventional data analysis methods. Therefore, the development of method which can effectively treat the data becomes a challenging issue in the field of computational biology. This research focuses on the gene selection and classification for cancer subtype discrimination based on gene expression (microarray) data.

• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.389-394
• /
• 2006

Inaccurate localization exposes a robot to many dangerous conditions. It could make a robot be moved to wrong direction or damaged by collision with surrounding obstacles. There are numerous approaches to self-localization, and there are different modalities as well (vision, laser range finders, ultrasonic sonars). Since sensor information is generally uncertain and contains noise, there are many researches to reduce the noise. But, the correctness is limited because most researches are based on statistical approach. The goal of our research is to measure more exact robot location by matching between built VRML 3D model and real vision image. To determine the position of mobile robot, landmark-localization technique has been applied. Landmarks are any detectable structure in the physical environment. Some use vertical lines, others use specially designed markers, In this paper, specially designed markers are used as landmarks. Given known focal length and a single image of three landmarks it is possible to compute the angular separation between the lines of sight of the landmarks. The image-processing and neural network pattern matching techniques are employed to recognize landmarks placed in a robot working environment. After self-localization, the 2D scene of the vision is overlaid with the VRML scene.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.13-20
• /
• 2010

본 연구의 목적은 Display 산업의 중요성에 주목하여 옥외 광고를 위한 LCD 패널용 콘솔(이하 'LCD 콘솔'이라 한다.)을 개발하는데 있다. 본 연구의 핵심 과제는 LCD 콘솔의 내부온도를 제어할 수 있도록 해주는 냉각시스템(Cooling System)을 개발하는 것이다. 냉각시스템은 상용화되어 있는 냉각휀(Cooling Fan), 히트싱크(Heat sinks), 열전소자(Thermo Electronic Module) 등의 제품들을 시스템적으로 통합시키는 응용기술로서 통계적 검정기법을 적용하여 개발되었다. 본 연구는 먼저 냉각시스템을 설계/제작한 후 실험을 통하여 냉각시스템 제어에 필요한 인자들의 설정 값들을 구하는 과정을 보였다. 이어서 개발된 냉각시스템을 이용하여 46인치 LCD Panel이 탑재된 LCD 콘솔을 설계/제작하고 실험을 통하여 완성품 LCD 콘솔의 성능을 확인하는 과정을 보였다.

• 대한수의학회지
• /
• 제38권1호
• /
• pp.133-137
• /
• 1998

To investigate the effect of acupuncture on bovine parasitosis, we first surveyed the prevalence of parasite by fecal sedimentation and floatation techniques, and Giemsa stain for blood parasites. Coccidia were the most frequent parasite(22.1%), which followed by Buxtonella sulcata. Others were very few. After acupuncture, infection rates of Coccidia and B sulcata started to decrease at 1 day after acupuncture(DAA) and reduced to 5.3% and 0% at 7 and 21 DAA, respectively. In comparison between treated and control groups, due to small sample number, statistical evaluation was impossible. But diarrhea of treated group was slightly decreased, while, haemoparasites infection rate is decreased in control group. To gain the confident result of acupuncture effect, the more investigation is needed.

• Advances in nano research
• /
• 제14권2호
• /
• pp.155-164
• /
• 2023

Grain size in sheet metals in one of the main parameters in determining formability. Grain size control in industry requires delicate process control and equipment. In the present study, effects of grain size on the formability of steel sheets is investigated. Experimental investigation of effect of grain size is a cumbersome method which due to existence of many other effective parameters are not conclusive in some cases. On the other hand, since the average grain size of a crystalline material is a statistical parameter, using traditional methods are not sufficient for find the optimum grain size to maximize formability. Therefore, design of experiment (DoE) and artificial intelligence (AI) methods are coupled together in this study to find the optimum conditions for formability in terms of grain size and to predict forming limits of sheet metals under bi-stretch loading conditions. In this regard, a set of experiment is conducted to provide initial data for training and testing DoE and AI. Afterwards, the using response surface method (RSM) optimum grain size is calculated. Moreover, trained neural network is used to predict formability in the calculated optimum condition and the results compared to the experimental results. The findings of the present study show that DoE and AI could be a great aid in the design, determination and prediction of optimum grain size for maximizing sheet formability.