• The Korean Journal of Physiology and Pharmacology
• /
• 제4권5호
• /
• pp.403-408
• /
• 2000

The outward currents elicited in hamster eggs by depolarizing pulses were studied. The currents appeared to comprise at least two components, a transient outward component $(I_{to})$ and a steady-state outward component $(I_{\infty}).\;I_{to}$ was transiently followed by the cessation of inward $Ca^{2+}$ current $(I_{Ca}),$ and its current-voltage (I-V) relation was a mirror image of that of $(I_{Ca}).$ Either blockade of $(I_{Ca})$ by $Co^{2+}$ or replacement of $Ca^{2+}$ with $Sr^{2+}$ abolished $I_{to}$ without change in $I_{\infty}.$ Intracellular EGTA (10 mM) inhibited $I_{to}$ but not $I_{\infty}.$ suggesting strongly that generation of $I_{to}$ requires intracellular $Ca^{2+}.$ Apamin (1 nM) abolished selectively $I_{to},$ indicatingthat $I_{to}$ is $Ca^{2+}-dependent\;K^+$ current. On the other hand, $I_{\infty}$ was $Ca^{2+}-independent.$ Both $I_{to}$ and $I_{\infty}$ were completely inhibited by internal $Cs^+$ and external TEA. The estimated reversal potential of $I_{to}$ was close to the theoretical $E_K.$ Taken together, both outward currents were carried by $K^+$ channels. From these results, $I_{to}$ is likely to be a current responsible for the hyperpolarizing responses seen in hamster eggs at fertilization.

• KDI Journal of Economic Policy
• /
• 제31권2호
• /
• pp.1-13
• /
• 2009

환율 결정 모형의 근간이 되는 이론으로 널리 알려져 온 화폐모형은 두 국가 간의 환율이 각국의 통화량과 소득 수준에 의해 결정된다고 설명하고 있다. 그러나 이 이론이 성립하려면 이 모형에 내포된 변수 간에 공적분이 성립해야 하는데, Rapach and Wohar(2002)의 논문은 10개 국가의 자료 중 대 여섯개의 자료에만 (선형) 공적분이 존재한다는 결과를 제시하였다. 본 논문은 그들이 사용한 100년간에 걸친 자료를 사용하되, 환율 결정과정에서 발생할 수 있는 비대칭적 조정과정을 감안하여 비선형 공적분이 성립하는가를 검증하였다. 또한 독립변수가 불안정적이 아닐 경우에는 공적분 관계를 설정하기 곤란하다는 이유로 누락시키는 경우가 많은데 본 논문에서 사용되는 방법론에서는 그러한 문제가 제기되지 않는다. 본 논문에서는 선형 공적분 검정 결과에 비해 더 많은 경우에 있어서 비선형 공적분 관계가 있다는 검정 결과가 산출되었다.

• 한국통신학회논문지
• /
• 제39C권4호
• /
• pp.315-325
• /
• 2014

유비쿼터스 환경에서 실내 공간의 사용자 위치정보는 다양한 응용분야에서 사용자에 특화된 서비스를 제공하는데 필요한 필수적인 정보이기 때문에 매우 중요하다. 기존연구들은 규모가 큰 건물에서의 사용자 위치 예측만 고려하고 있고 실험 대상이 되는 공간에서 고정된 AP가 다수 존재한다고 가정한다. 그러나 일반 가정은 면적이 좁은 공간들로 구성되며 고정된 AP가 소수이고 변화가 유동적인 환경이다. 본 논문에서는 기존 연구들이 AP환경이 비교적 안정적인 큰 건물에서의 사용자 위치 예측에 집중한 것과 달리, 일반 가정환경에서 와이파이 핑거프린트 방식을 기반으로 하여 공간을 식별하고 사용자의 위치를 Room-level로 예측하는 사용자 공간 예측 시스템을 제안한다. 실제 가정에서 실험을 한 결과 제안하는 시스템이 모든 가정에서 평균 80%이상의 정확도로 사용자가 위치한 공간을 예측함을 알 수 있었다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.373-375
• /
• 2002

4D CT is a dynamic volume imaging system of moving organs with an image quality comparable to conventional CT, and is realized with continuous and high-speed cone-beam CT. In order to realize 4D CT, we have developed a novel 2D detector on the basis of the present CT technology, and mounted it on the gantry frame of the state-of-the-art CT-scanner. In the present report we describe the design of the first model of 4D CT-scanner as well as the early results of performance test. The x-ray detector for the 4D CT-scanner is a discrete pixel detector in which pixel data are measured by an independent detector element. The numbers of elements are 912 (channels) ${\times}$ 256 (segments) and the element size is approximately 1mm ${\times}$ 1mm. Data sampling rate is 900views(frames)/sec, and dynamic range of A/D converter is 16bits. The rotation speed of the gantry is l.0sec/rotation. Data transfer system between rotating and stationary parts in the gantry consists of laser diode and photodiode pairs, and achieves net transfer speed of 5Gbps. Volume data of 512${\times}$512${\times}$256 voxels are reconstructed with FDK algorithm by parallel use of 128 microprocessors. Normal volunteers and several phantoms were scanned with the scanner to demonstrate high image quality.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 한국화재소방학회논문지
• /
• 제20권1호
• /
• pp.43-49
• /
• 2006

본 논문은 조명설비 중 220V/100W 백열전구의 온도특성과 화재분석에 관하여 연구하였다. 백열전구의 발열에 의한 발화가능성을 실험한 결과 정상상태에서는 최고 $161.9^{\circ}C$로 측정되었다. 밀폐된 공간에서 축 열이 되면 약 $538.1^{\circ}C$까지 상승하는 것으로 나타났다. 유리구를 파손하였을 경우 필라멘트는 공기 중에서 용단되었다. 외부 열에 의한 경우 전구 내부의 가스가 약한 부분으로 분출되었다. 따라서 백열전구는 산소의 공급이 원활하면서 폐쇄된 공간에서 화재의 가능성이 높으며, 가연성 물질 등이 주변에 있다면 화재 가능성이 매우 높은 것으로 나타났다. 백열전구의 외형변화, 재료특성의 변화 등을 통해 화재원인을 규명하는 중요한 자료로 이용될 것이 기대된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권4호
• /
• pp.27-31
• /
• 2004

This paper describes the development and fabrication of a high temperature superconducting motor which consists of HTS rotor and air-core stator. The machine was designed for the rated power of 100hp at 1800 rpm. The HTS field windings are composed of the double-pancake coils wound with AMSC's SUS-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. Characteristic parameters such as reactances, inductances, and time constants were determined to obtain a consistent overview of the machine operation properties. This motor has met all design parameters by demonstrating HTS field winding, cryogenic refrigeration systems and an air-core armature winding cooled with air. The HTS field winding could be cooled down below 30K. No-load test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction, and basic experimental test results of the 100hp HTS machine.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1078-1088
• /
• 2010

In order to analyze the quantitative characteristics of acoustic streaming, experimental setup of 3-D stereoscopic PIV(particle imaging velocimetry) was designed and quantitative ultrasonic flow fields in the gap between the ultrasonic vibrator and heat source were measured. Utilizing acoustic streaming induced by ultrasonic vibration, surface temperature drop of cooling object was also measured. The study on smart cooling method by acoustic streaming induced by ultrasonic vibration was performed due to the empirical relations of flow pattern, average flow velocity, different gaps, and enhancement on cooling rates in the gap. Average velocity fields and maximum acoustic streaming velocity in the open gap between the stationary cylindrical heat source and ultrasonic vibrator were experimentally measured at no vibration, resonance, and non-resonance. It was clearly observed that the enhancement of cooling rates existed owing to the acoustic air flow in the gap at resonance and non-resonance induced by ultrasonic vibration. The ultrasonic wave propagating into air in the gap creates steady-state secondary eddy called acoustic streaming which enhances heat transfer from the heat source to encompassing air. The intensity of the acoustic streaming induced by ultrasonic vibration experimentally depended upon the gap between the heat source and ultrasonic vibrator. The ultrasonic vibration at resonance caused the increase of the acoustic streaming velocity and convective heat transfer augmentation when the flow fields by 3D stereoscopic PIV and temperature drop of the heat source were measured experimentally. The acoustic streaming velocity of air enhancement on cooling rates in the gap is maximal when the gap agrees with the multiples of half wavelength of the ultrasonic wave, which is specifically 12 mm.

• 한국통신학회논문지
• /
• 제29권9A호
• /
• pp.1022-1030
• /
• 2004

차세대 이동 및 우선통신 시스댐은 현재보나 얘우 큰 고속의 데이터 전송과 시스템 용량을 요구하고 였으며 이러한 요구를 충족시키기 위해서 복수의 안테나를 사용하여 송수신을 하는 MIMO(m 비 tiple input, multiple output) 기술이 널리 연구되고 있다 이 논문은 다수의 안테나를 가지고 있는 기지국, 소수의 안테나를 가지고 있는 단말기의 하향 링크에서 스케터령과 변동이 적으며 평탄한 페이딩 채널을 가정한다. 단영 사용가 MIMO 시스템에서 가지국이 채널상태정보를 가지고 있다연 SVD(singular value decomposition) 와 water filling 읍 사용 한 MIMO 기숭이 최대의 채널용량을 이룬다. 그러나 복수 사용자 시스템의 경우에는 공간분할 다중접속 기술을 이용하여, 보다 큰 전체 채널용량을 얻는 것이 가능하다 이 논문은 복수 사용가 시스템에서 각 사용자에게 복수 의 데이터 스트림을 전송하는 MIMO 공간분할 다중접속 기술을 제안한다. 제안하는 기술은 SVD 기반의 MIMO 기술이나 스마트 안테나를 사용한 공간분항 다중정속 기술보다 더 큰 전체 채널용량을 얻을 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.