• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.1-10
• /
• 2010

In the present paper, a numerical method based on the constraint interpolation profile (CIP) method is applied for simulating two-dimensional violent sloshing problems. The free surface boundary value problem is considered as a multiphase problem which includes water and air. A stationary Cartesian grid system is adopted, and an interface capturing method is used to trace the shape of free surface profile. The CIP combined unified procedure (CCUP) scheme is applied for flow solver, and the tangent of hyperbola for interface capturing (THINC) scheme is used for interface capturing. Numerical simulations have been carried out for partially-filled 2D tanks under forced sway and roll motions at various filling depths and frequencies. The computational results are compared with experiments and/or the other numerical results to validate the present numerical method.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.65-73
• /
• 2014

In this paper, the detection scheme of the voltage variation using a two difference voltage is proposed. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on a d-q transformation using an all-pass filter (APF). The APF generates a virtual q-axis voltage component with $90^{\circ}$ phase delay but the APF cannot generate the virtual q-axis voltage depending on the phase of the grid voltage. To overcome the problem, q-axis voltage component is generated from difference between the current and previous value of d-axis voltage component in the stationary reference frame. However, the difference voltage around the zero crossing is not enough to detect the voltage sag. Therefore, the new detection scheme using the two difference voltage which can detect the sag around the zero crossing voltage is proposed.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.96-104
• /
• 2014

The all pass filter generates a virtual q-axis voltage component with $90^{\circ}$ phase delay but the virtual q-axis voltage cannot detect the voltage depending on the phase of the grid voltage. To overcome the problem, q-axis voltage component is generated from difference between the current and previous value of d-axis voltage component in the stationary reference frame. However, the difference voltage between the current and previous value around the zero crossing voltage is not enough to detect the voltage sag. Therefore, the new detection scheme which can detect the sag around the zero crossing voltage is proposed.

• 한국인터넷방송통신학회논문지
• /
• 제16권6호
• /
• pp.147-152
• /
• 2016

배선 작업이 어려운 공장 환경에서 설비의 상태를 모니터링하는 시스템을 구축하기위해 배포와 설치가 쉬운 무선센서 네트워크가 적합하다. 지그비는 다른 무선 통신 프로토콜에 비해 저가격, 저전력 특징을 가지고 있어 다수의 노드를 필요로 하는 모니터링 시스템에 적용하기 적합하다. 지그비 통신은 모든 프로토콜 계층이 서로 신뢰하는 OTM을 기반으로 하고 있기 때문에 디바이스 간에 암호화 보안이 필요하다. 각 노드간의 통신에 있어서 노드 인증을 보장하고, 각 노드가 관리하고 있는 비밀 정보의 노출을 최소화 해야 한다. 공장의 설비는 배포 위치가 규칙적이고 고정적이다. 공장 환경에서 센서로부터 수집되는 정보와 센서 노드에 연결되어 있는 엑츄에이터 제어 정보를 보호하기 위해 설비의 배포 환경과 유사한 이차원 그리드 기반 키 선분배 기법을 기반으로 하는 암호화 기법을 제안한다.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.569-576
• /
• 2011

본 논문에서는 PWM 인버터에 적합한 새로운 데드타임 보상방법을 제안한다. 최근 PWM 인버터는 교류전동기, 분산전원용 계통연계 시스템, 정지형보상기 등의 다양한 산업에 사용되고 있다. 그러나 사용되는 전력용 소자의 비선형적인 특성과 데드타임에 의해 전력의 품질이 저하되고 전류에 고조파가 발생하게 된다. 데드타임에 의한 고조파는 정지좌표계상에서는 제 5, 7 고조파가, 동기좌표계상에서는 제 6 고조파가 가장 현저하다. 본 논문에서는 동기좌표계상에서 공진제어기를 사용하여 제 6 고조파를 보상하는 방법을 제안한다. 제안된 방법은 시스템의 안정도를 유지하면서도 데드타임에 의한 전류의 고조파를 억제하여 전력품질을 향상시킬 수 있고, 제 6 고조파를 검출하기 위한 별도의 연산이나 외부적인 하드웨어, 추가적인 실험이 필요하지 않다는 장점이 있다.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.1-10
• /
• 2011

A new computational program, which is based on the CIP/CCUP(Constraint Interpolation Profile/CIP Combined Unified Procedure) method, has been developed to numerically analyse sloshing phenomena dealt as multiphase-flow problems. For the convection terms of Navier-Stokes equations, the RCIP(Rational function CIP) method was adopted and the THINC-WLIC(Tangent of Hyperbola for Interface Capturing-Weighted Line Interface Calculation) method was used to capture the air/water interface. To validate the present numerical method, two-dimensional dam-breaking and sloshing problems in a rectangular tank were solved by the developed method in a stationary Cartesian grid system. In the case of sloshing problems, simulations by using a improved MPS(Moving Particle Simulation) method, which is named as PNU-MPS(Pusan National University-MPS), were also carried out. The computational results are compared with those of experiments and most of the comparisons are reasonably good.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.129.1-129.1
• /
• 2010

Since the commencement of the fuel cell business in 2007, POSCO POWER has been the major supplier of the MCFC (Molten Carbonate Fuel Cell), which is the most commercialized stationary fuel cell system in the world. With its quite, yet active movement, more than 20MW MCFC systems have been installed and are operating in Korea. While trying to localize the components and set up a firm supply chain in Korea to provide more reliable and cost-competitive products to its customers, POSCO POWER is also devoting itself to developing new MCFC application products. One such product is a back-up power system, in which a back-up algorithm is embedded to the present system so that the product can work as a back-up generator in case of grid failure. The technology to enhance load following capability of a stack module is also being developed with the back-up algorithm. Another example is a building application, the goal being to make the present Sub-MW product suitable for urban area. For this, downsizing and modularization are the main R&D scope. The project for developing ship service fuel cell for APU application will launch soon as well. In the project, a system which can operate in marine environment, and reforming technology for liquid logistic fuel will be developed.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1334-1344
• /
• 2014

A novel single phase Phase-Locked Loop (PLL) is proposed in this paper to accurately and rapidly estimate the instantaneous phase angle of a grid. A conjugate rotating vector pair is proposed and defined to synthesize the single phase signal in the stationary reference frame. With this concept, the proposed PLL innovatively sets one phase input of the PARK transformation to a constant zero. By means of a proper cancellation, a zero steady state phase angle estimation error can be achieved, even under magnitude and frequency variations. The proposed PLL structure is presented together with guidelines for parameters adjustment. The performance of the proposed PLL is verified by comprehensive experiments. Satisfactory phase angle estimation can be achieved within one input signal cycle, and the estimation error can be totally eliminated in four input cycles for the most severe conditions.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1322-1333
• /
• 2014

To track the sinusoidal current under stationary frame and suppress the effects of low-order grid harmonics, the multi-resonant quasi-proportional plus resonant (PR) controller has been extensively used for digitally controlled LCL-type pulse-width modulation (PWM) converters with capacitor-current-feedback active damping. However, designing the controller is difficult because of its high order and large number of parameters. Moreover, the computation and PWM delays of the digitally controlled system significantly affect damping performance. In this study, the delay effect is analyzed by using the Nyquist diagrams and the system stability constraint condition can be obtained based on the Nyquist stability criterion. Moreover, impact analysis of the control parameters on the current loop performance, that is, steady-state error and stability margin, identifies that different control parameters play different decisive roles in current loop performance. Based on the analysis, a simplified controller design method based on the system specifications is proposed. Following the method, two design examples are given, and the experimental results verify the practicability and feasibility of the proposed design method.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.12-26
• /
• 2004

수치점성을 효과적으로 줄이기 위한 새로운 AUSM-type 수치기법을 개발하였다. TVD 제한자 분석을 통하여 제어면에서의 불성치를 보다 정확하게 예측할 수 있는 기준을 찾아내고 이를 이용하여 제어면의 물성치를 적절히 정의하는 M-AUSMPW+를 개발하였다. M-AUSMPW+의 장점은 다차원 유동을 해석하는데 있어 분명히 나타난다. M-AUSMPW+ 는 유동과 격자계가 일치하지 않는 격자계에서 수치점성을 효과적으로 제거할 수 있기 때문에 다차원 유동을 계산하는데 있어 기존의 어떠한 수치기법보다 정확하고 효과적인 계산이 가능하다. 접촉불연속면, 와류 유동, 충격파 경계층 상호작용, 정성 충격파관 문제를 통해 이를 확인하였다.