• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.562-567
• /
• 2003

This paper presents the method of Rate of Loading(ROL) improvement for the Motor Operated Gate Valve operating in high differential pressure condition. The character of ROL and Stem Factor is analyzed. Static test and dynamic test were performed and acquired the diagnosis signal for the valve closing stroke. The result of this study is the modification of stem factor is very important factor for the ROL improvement. In order to obtain the same value of dynamic test thread friction coefficient stem and stem nut should be combined appropriately.

• 국제물리치료학회지
• /
• 제11권2호
• /
• pp.2042-2051
• /
• 2020

Background: Many trials have been conducted the methods and types of intervention of form rollers, but no research has been done yet that mixes the methods and types of intervention. Objectives: To analyze the effects of myofascial release on the improvement of range of motion (ROM), flexibility, pain pressure threshold, and balance. Design: Randomized controlled trial. Methods: All subjects measured ROM, flexibility, pressure pain threshold, and dynamic balance by pre-test. After pre-test, subjects were randomized that static-vibration foam rolling group (n=12), dynamic-vibration foam rolling group (n=12), general foam rolling group (n=12). For the intervention, 3 sets of 90 seconds were applied to each group, and rest time was set to 60 seconds between sets. In the post-test and follow-up test after 10 minutes, all three groups were measured the ROM, flexibility, pressure pain threshold, and dynamic balance. Results: The results of comparing ROM, flexibility, pressure pain thresholds, dynamic balance ability appeared higher significant difference in the pre-post-10 minutes follow up test in comparison between time in the intragroup (P<.001). As a result of comparing the change of pre-post-10 minutes follow up, static vibration foam rolling showed higher significant difference compared to control groups (P<.001). Conclusion: Through this study, when foam rolling is applied within the same intervention time, static foam rolling can be expected to have a better effect than the existing dynamic foam rolling as well as vibration foam roller can expect better effect than general foam rolling.

• 대한정형도수물리치료학회지
• /
• 제28권1호
• /
• pp.61-69
• /
• 2022

Background: This study aimed to investigate the effect of maitland mobilization and mobilization with movement (MWM) applied to the ankle joint on ankle dorsiflexion range of motion (ROM), static and dynamic balance, plantar pressure, and gait ability. Methods: A total of 24 individuals were assigned to either the maitland mobilization group (n=12) or the MWM group (n=12). Dorsiflexion ROM, static and dynamic balance, plantar pressure, 10-meter walk test were measured before and 4 weeks after the intervention. Results: Both groups showed a significant difference in the evaluation after 4 weeks as the dorsiflexion ROM of the ankle increased (p<.05), and the sway length and sway area indicating static balance decreased (p<.05). Furthermore, the movement area showing dynamic balance showed a significant increase (p<.05), the plantar pressure difference between both feet significantly decreased (p<.05). In the 10-meter walk test, there was a significant difference as the time decreased (p<.05). However, no significant difference between the two groups was observed (p>.05). Conclusion: According to the results of this study where, maitland mobilization and MWM were applied to the ankle joint of hemiplegic patients for 4 weeks, we found no difference between the two groups. However, each technique was found to be effective for dorsiflexion ROM, static and dynamic balance, plantar pressure, and gait.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.245-251
• /
• 2004

This paper discuss the conditionally sampled actual wind pressure distributions causing peak quasi-static wind loads in the large span roofs using the wind pressures at many locations on dome models measured simultaneously in a wind tunnel. The actual extreme pressure distributions are compared itk load-response-correlation (LRC) method and the quasi-steady pressure distributions. Based on the results, the reason for the discrepancy in the LRC pressure distribution and the actual extreme pressure distribution are discussed. Futhermore, a brief discussion is made of the equivalent static wind load estimation for the large span roofs.

• 한국추진공학회지
• /
• 제26권4호
• /
• pp.10-20
• /
• 2022

한국항공우주연구원의 자유제트형 지상추진시험설비인 스크램제트 엔진 시험설비의 마하 5 조건에서 스크램제트 엔진 흡입구의 성능분석 시험을 진행하였다. 스크램제트 엔진 흡입구의 대표적인 성능 인자인 전압력 회복률, 공기 포획율 측정을 위하여 격리부 후방에 설치되는 피토/정압 레이크가 설계 제작되었다. 격리부 후방에 장착된 레이크가 전방의 흡입구 램프와 격리부에 미치는 영향과 레이크로 측정된 흡입구의 성능 인자 분석 그리고 흡입구의 받음각 변화에 따른 벽면 정압력 분포 변화에 대한 분석이 수행되었다. 끝으로 연소기에서의 압력 상승을 모사하는 장치인 흡입구 후방 배압 조정 장치를 이용하여 흡입구 불시동이 발생하는 시점을 확인하였으며, 본 논문에는 그 결과를 정리하였다.

• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.19-28
• /
• 2003

통상 콘크리트 옹벽에 작용하는 수평토압 산정에는 Rankine이나 Coulomb의 토압이론을 사용하고 있으나 문헌연구결과, 실제 옹벽 벽체에 발생하는 변위인자에 의한 영향으로 벽체 중단부 이상에서는 주동토압 상태를 나타내고 있으나 벽체 중단부 하단에서는 주동토압보다 큰 토압을 가지고 있다. 본 연구에서는 이와 같은 수평토압을 저감하기 위한 방안의 하나로 압축성 재료인 EPS를 벽체 배면에 설치하여 배면토체의 변위를 인위적으로 유발함으로서 수평토압의 크기를 저감시킬 수 있는 방안을 제시하였다. EPS에 의한 수평토압 저감효과, 최적의 EPS 포설두께 및 밀도를 알아보기 위한 실내모형토조시험을 실시하였으며 그 효과가 검증되었다. 실내모형토조시험에서 도출된 결과를 이용한 현장 시험시공결과, EPS 포설에 의해 약 20%의 수평토압저감효과를 가질 수 있는 것으로 평가되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.37-40
• /
• 2002

The engine performance test was carried out to investigate the effects of breath and exhaust on the performance of a reciprocating engine for small aircraft. In this test, three valves to control flow areas of a inlet and two outlets were used, the engine manifold pressure and the static thrust of propeller were measured in nine breath/exhaust conditions. Generally, small variations on the performance were showed as the test conditions were changed. The manifold pressure was increased as flow area of the inlet or the outlet was decreased in normal condition, however it was decreased as both flow areas were decreased. The static thrust of propeller was showed similar as the manifold pressure.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.219-222
• /
• 2007

본 연구에서는 노즐 외기 압력 변화에 따른 KSLV-I 2단 고체추진기관의 성능 분석을 수행하였다. 2단 고체추진기관은 고도 약 300km 상공에서 연소를 할 예정이다. 모터의 성능 검증을 위해 대기 압력 환경에서 연소시험을 수행하였다. 그리고, 환경 시험 설비를 적용하여 진공환경의 모터 성능 검증을 진행하였다. 지상 및 진공환경에서의 모터 비추력 변화를 통해 노즐 외기 압력이 고체추진기관의 성능에 미치는 영향을 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1231-1234
• /
• 2003

Pneumatic servo valve which is widely applied in industrial world is advanced technology compounded with electric, electronic and machine. And It is consist of Linear Force Motor. Spool Commutation Mechanism and Microprocessor. In this study, we accomplished test method of Linear Force motor test, Static characteristic test, Dynamic characteristic test for KS(Koran industrial standard) of Pneumatic servo valve. we accomplished study about the main item of Static characteristic test which is related to unload flow characteristic test. And Dynamic characteristic test was step input test and frequency response test. Specially about frequency response test, There was a difficulty resulting from the time delay problem caused by the basic compressibility of air. In order to solve the problem in this study. we proposed two methods. First, displacement of the servo valve spool was directly measured by using a laser sensor. Second, method of calculating control flow by measuring pressure and temperature of chamber.

• 한국운동역학회지
• /
• 제26권1호
• /
• pp.115-126
• /
• 2016

Objective: The purpose of this study was to investigate plantar foot pressure and static balance according to the type of insole in the elderly. Methods: Thirteen elderly (mean age: $67.08{\pm}2.25years$, mean height: $159.63{\pm}9.64cm$, mean body weight: $61.48{\pm}9.06kg$) who had no previous injury experience in the lower limbs and a normal gait pattern participated in this study. Three models of insoles of the normal, 3D, and triangle types were selected for the test. The Pedar-X system and Pedar-X insoles, 3.3 km/h of walking speed, and a compilation of 20 steps walking stages were used to analyze foot-pressure distribution. Static balance test was conducted using Gaitview AFA-50, and balance (opening eyes, closing eyes) was inspected for 20 s. One-way ANOVA was conducted to test the significance of the results with the three insoles. p-value of less than .05 was considered statistically significant. Results: The mean foot pressure under the forefoot regions was the lowest with the 3D insole during treadmill walking (p<.05). The mean value under the midfoot was the highest with the 3D insole (left: p<.05, right: p<.01). The mean value under the rearfoot was the lowest with the 3D insole (p<.001). The maximum foot pressure value under the foot regions was the lowest on both sides of the forefoot with the 3D insole. A statistically significant difference was seen only in the left foot (p<.01). The maximum value under the midfoot was the highest with the 3D insole (p<.001). No statistically significant difference was detected on the values under the rearfoot. In the case of vertical ground reaction force (GRF), statistically significant difference was seen only in the left side rearfoot (p<.01). However, static balance values (ENV, REC, RMS, Total Length, Sway velocity, and Length/ENV) did not show significant differences by the type of insole. Conclusion: These results show that functional insoles can decrease plantar pressure and GRF under the forefoot and rearfoot. Moreover, functional insoles can dislodge the overload of the rearfoot and forefoot to the midfoot. However, functional insoles do not affect the static balance in the elderly.