• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.5-11
• /
• 2007

국내에서는 조립토를 이용한 연약지반 처리공법 중 모래다짐말뚝공법이 많이 활용되고 있으나, 모래자원의 고갈과 단가상승으로 인해 적용이 제한되고 있어 대체공법이 필요한 실정이다. 본 연구에서는 육상부 현장에 시험시공된 단일쇄석다짐말뚝에 대한 정재하시험을 수행하였다. 시험시 말뚝의 직경을 700mm로 고정하구 재하판의 면적을 변화시켰으며, 치환율 20, 30, 40%에 대하여 정재하시험을 실시하였다. 그 결과를 토대로 하여 단일쇄석다짐말뚝의 지지력 증가효과를 평가하였다. 치환율이 증가할수록 침하량이 작아지는 경향을 보였다. 또한, 치환율이 고려된 단일쇄석다짐말뚝의 항복지지력 공식을 제안하였다.

• Geomechanics and Engineering
• /
• 제29권4호
• /
• pp.407-420
• /
• 2022

Embedded piles, which are typically used in Korea, are precast piles inserted into prebored ground with cement paste. Dynamic pile tests tend to underestimate the bearing capacity of embedded piles because of the undeveloped shaft resistance prior to the curing of the cement paste and the insufficient energy transferred after the curing. In this study, a resistance combination method using the base resistance before the cement paste is cured and the shaft resistance after the cement paste is cured is proposed to obtain a combined load-settlement curve from dynamic pile tests. Two pairs of embedded piles with diameters of 600 and 500 mm are installed. Each pair comprises one pile for the dynamic pile test and another pile for the static load test. The shape of the load-settlement curve obtained using the proposed method is similar to that obtained from the static load test. Thus, the resistances evaluated using the proposed method at selected settlements are similar to those obtained from the static load test. This study shows that the resistance combination method may be used effectively in dynamic pile tests to accurately evaluate the bearing capacity of embedded piles.

• 한국지반환경공학회 논문집
• /
• 제9권5호
• /
• pp.45-52
• /
• 2008

본 연구에서는 지반 및 구조물의 문제점을 이상화 하는데 필요한 응용기술을 개발하기 위해 공개되어 있는 소프트웨어 즉 도스용 프로그램을 윈도우상에서 OpenSees 말뚝의 정적 지지지력과 침하를 분석할 수 있도록 하여 윈도우상에서 사용자가 편리하게 전 처리와 후 처리 및 경제조건 처리가 가능하도록 OpenSees프로그램을 개선하였다. 본 연구에 사용된 지지력 분석은 유한요소 해석과 합성된 하중전이함수에 근거한 수치해석방법이다. 본 연구에서는 흙-말뚝의 상호작용에 의한 마찰력과 선단 지지력을 각각 모델링하기 위해 경험적인 비선형 T-z과 Q-z곡선에 의한 하중전이법을 이용하여 하중재하에 따른 침하조건에서의 흙-말뚝의 반응을 나타내었다. 본 연구에서 예측한 정적 지지력과 침하량은 문헌에 의한 정적재하시험 결과와 잘 일치하는 것으로 나타나 유용하게 활용될 수 있을 것으로 판단된다.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.378-385
• /
• 2008

In foil bearings, the friction between bumps and their mating surfaces is the major factor which exerts great influence on the bearing performance. From this point of view, many efforts have been made to improve the understanding of the influence of the friction on the foil bearing performance by developing a number of analytical models. However, most of them did not consider the hysteretic behavior of the foil structure resulting from the friction. The present work developed the static structural model in which hysteretic behavior of the friction was considered. The foil structure was modeled using finite element method and the algorithm which determines the conditions of the contact nodes and the directions of the friction forces was used to take into account the friction. The developed model was integrated into the foil bearing prediction code to investigate the effects of the friction on the static performance of the bearing. The results of analysis show that multiple static equilibrium positions are presented for the one static load under the influence of the friction, inferring its great effects on the dynamic performance. However, the effect of friction on the minimum film thickness which determines load capacity of the bearing is negligible.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.201-212
• /
• 2001

In order to investigate the effect of the loading rate on the mechanical behavior of SRC shearwalls, we conducted the lateral loading tests on the 1/3 scale model shearwalls whose edge columns were reinforced by H-shaped steel. The specimens were subjected to the reversed cyclic lateral load under a variable axial load. The two types of loading rate, 0.01 cm/sec for the static loading and 1 cm/sec for the dynamic loading were adopted. The failure mode in all specimens was the sliding shear of the in-filled wall panel. The edge columns did not fail in shear. The initial lateral stiffness and lateral load carrying capacity of the shearwalls subjected to the dynamic loading were about 10% larger than those subjected to the static loading. The effects of the arrangement of the H-shaped steel on the lateral load carrying capacity and the lateral load-displacement hysteresis response were not significant.

• 한국지반신소재학회논문집
• /
• 제22권1호
• /
• pp.39-51
• /
• 2023

매입말뚝의 지지력은 많은 연구자들에 의해 연구되었다. 하지만 하중분담률과 침하량에 대하여 설계 자료와 말뚝재하시험 지료를 비교한 연구는 미미하였다. 그래서 매입 개단 강관말뚝에 대하여 설계식 자료와 정재하시험 결과를 비교하였다. 압축재하시험에서는 선단지지하중과 주면마찰하중의 분담률이 각각 13%~40%, 60%~87%로 나타났고, 이때의 침하량은 2.2mm~4.7mm로 측정되었다. 현행 지지력 산정식에서는 선단지지력과 주면마찰력이 각각 54%~75%, 25%~46%를 분담하는 것으로 나타났고, 침하량은 19.8mm~23.6mm로 계산되었다. 현행지지력 산정식에서의 침하량은 시험에서의 침하량보다 321%~776% 만큼 크게 나타났으며, 평균적으로 445%만큼 크게 나타났다. 말뚝재하시험에서의 하중분담률을 이용하여 침하량을 산정하면, 시험 침하량보다 137%~525% 만큼 크게 나타났으며, 평균적으로 204% 만큼 크게 나타났다. 하중분담률의 적절한 평가는 말뚝 기초의 침하량 산정에 중요한 영향을 미치는 것으로 확인되었다.

• Smart Structures and Systems
• /
• 제32권6호
• /
• pp.371-382
• /
• 2023

Box girder bridges are now widely used in bridge construction, and it is necessary to perform load rating regularly to evaluate the load capacity of box girder bridges. Load testing is a common measure for load rating. However, the bridge must be loaded by many trucks under different loading conditions, which is time-consuming and laborious. To solve this problem, this paper proposes a load rating method for box girder bridges based on rapid moving loads testing. The method includes three steps. First, the quasi-influence factors of the bridge are obtained by crossing the bridge with rapidly moving loads, and the structural modal parameters are simultaneously obtained from the dynamic data to supplement. Second, an objective function is constructed, consisting of the quasi-influence factors at several measurement points and structural modal parameters. The finite element model for load rating is then updated based on the Rosenbrock method. Third, on this basis, a load rating method is proposed using the updated model. The load rating method proposed in this paper can considerably reduce the time duration of traditional static load testing and effectively utilize the dynamic and static properties of box girder bridges to obtain an accurate finite element model. The load capacity obtained based on the updated model can avoid the inconsistency of the evaluation results for the different structural members using the adjustment factors specified in codes.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.137-142
• /
• 2002

The fluid mechanics and operating conditions of gas-lubricated proceeding bearings in micro rotating machinery such as micro polarization modulator and micro gas turbine are different from their larger size ones. Due to non-continuum effects, there is a slip of gas at the walls. Thus in this paper, the slip flow effect is considered to estimate the pressure distribution and load-carrying capacity of micro gas-lubricated proceeding bearings as the local Knudsen number at the minimum film thickness is greater than 0.01. Based on the compressible Reynolds equation with slip flow, the static characteristics of micro gas-lubricated proceeding bearings are obtained. Numerical predictions compare the pressure distribution and load capacity considering slip flow with the performance of micro proceeding bearings without slip f]ow for a range of bearing numbers and eccentricities. The results clearly show that the slip flow effect on the static characteristics is considerable and becomes more significant as temperature increases.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.43-59
• /
• 2014

Many bridges are subject to lateral damage for their girders due to impact by over-height vehicles collision. In this study, the optimum configurations of carbon fiber reinforced polymers (CFRP) laminates were investigated to repair the laterally damaged prestressed concrete (PS) bridge girders. Experimental and analytical investigations were conducted to study the flexural behavior of 13 half-scale AASHTO type II PS girders under both static and fatigue loading. Lateral impact damage due to vehicle collision was simulated by sawing through the concrete of the bottom flange and slicing through one of the prestressing strands. The damaged concrete was repaired and CFRP systems (longitudinal soffit laminates and evenly spaced transverse U-wraps) were applied to restore the original flexural capacity and mitigate debonding of soffit CFRP longitudinal laminates. In addition to the static load tests for ten girders, three more girders were tested under fatigue loading cycles to investigate the behavior under simulated traffic conditions. Measurements of the applied load, the deflection at five different locations, strains along the cross-section height at mid-span, and multiple strains longitudinally along the bottom soffit were recorded. The study investigated and recommended the proper CFRP repair design in terms of the CFRP longitudinal layers and U-wrapping spacing to obtain flexural capacity improvement and desired failure modes for the repaired girders. Test results showed that with proper detailing, CFRP systems can be designed to restore the lost flexural capacity, sustain the fatigue load cycles, and maintain the desired failure mode.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.85-92
• /
• 2007

최근, 대형구조물의 기초로서 현장타설말뚝의 사용이 증가하면서 신뢰성있는 말뚝 지지력의 산정이 중요해졌다. 이에 따라, 본 연구에서는 국내 풍화암에 근입된 현장타설말뚝을 대상으로 정재하시험 수행결과와 지지력 공식으로부터 구한 지지력값을 비교함으로써 지지력 공식의 신뢰성을 확인하고자 하였다. 분석대상은 4개 현장에서 수행된 총 12본의 정재하시험 말뚝이며, 시험말뚝에 대한 재하시험 자료 및 풍화암의 암반 물성값을 분석하였다. 본 연구에서 분석한 지지력 공식은 실무에서 널리 적용되고 있는 AASHTO 방법(1996), Carter와 Kulhawy 방법(1988), 그리고 FHWA 방법(1999)등이다. 재하시험에서 결정된 지지력과 각 지지력 공식들의 산정 결과를 비교 분석한 결과 Carter와 Kulhawy 방법(1988)이 설계 안전측의 지지력값을 주며 변동계수가 작아서 신뢰성이 높은 것으로 평가되었다.