• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.173-180
• /
• 2011

본 연구에서는 일반 점검용 사진목적으로 촬영되어 저장되어 있는 데이터베이스(Data Base)의 이미지에서 목표물의 색, 형태 및 공간이동 정보를 수치 해석적으로 접근하여 교량의 변위를 산출하는 비접촉, 비타켓 방식의 영상처리기법(Image Processing Technique)을 제안하였다. 수치해석 및 모형실험을 통하여, 일반 교량점검 사진에서 교량의 변위를 추출하는 방법으로 타당함을 검증하였다. 이를 활용하여 공용중인 교량의 온도에 의해 변화하는 교량의 정적 거동특성을 파악할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.859-862
• /
• 2008

We have realized static image on organic light emitting diodes (OLEDs) using photoluminescence degradation. Ultraviolet (UV) was irradiated to the glass side of device. UV power was 350 Wand the wavelength was 365 nm. The UV irradiation gives rise to the degradation of photoluminescence. Due to the degradation, the current density-voltage curve was shifted to the higher voltage side and the luminescence was also degraded by the current and photoluminescence drop. The negative imaged films were prepared to control the transmittance of UV. The UV light was passed through the film. By this method, the film image was transferred to the device with reversed image and the static image was realized on the OLED.

• 핵의학기술
• /
• 제14권1호
• /
• pp.46-53
• /
• 2010

정적 영상 획득 시 기존의 정적 영상 획득 방식 대신 동적 영상 획득 방식을 이용하여 움직임에 의한 motion correction을 적용함으로써 정적 영상 획득 시 발생되는 움직임에 의한 문제점을 해결하고자 하였다. 실험은 capillary tube와 IEC body phantom을 이용하여 움직임이 없을 때 정적 영상 획득 방식으로 얻은 영상과 동적 영상 획득 방식으로 얻은 각각의 frame을 더한 영상에 대해 resolution, frequency, total counts, blind test를 비교 분석하였으며 임의로 최소한의 움직임과 과도한 움직임을 주어 motion correction 전후의 영상에 대해서도 resolution, frequency, total counts, blind test를 비교 분석 하였다. 기존의 정적 영상 획득 방식으로 얻은 영상과 동적 영상 획득 방식으로 얻은 각각의 frame을 더한 영상의 resolution, frequency, total counts, blind test의 결과 값의 차이가 없었다. 또한 최소한의 움직임과 과도한 움직임을 준 영상에 대해 motion correction 적용 전후의 비교 결과 값은 motion correction 후 resolution, frequency, blind test의 결과 값이 움직임이 없을 때의 정적 영상과 거의 차이가 없었다. 하지만 과도한 움직임에 대한 보정 시 frame당 흐림 현상이 많이 발생 하였으므로 좌표 보정이 어려워 frame을 제외하는 방법을 적용하였기 때문에 과도한 motion correction 후 삭제한 frame 수만큼 total counts에서 차이를 보였다. 정적 영상 획득 시 움직임이 예상되는 환자에게 기존의 정적 영상 획득방식이 아닌 동적 영상 획득 방식을 이용하여 움직임 발생시 좌표 보정과 흐림 현상이 심한 frame 제외 방법을 이용하여 정적 영상에서 움직임에 의해 발생되었던 영상의 질 저하와 정량적 분석의 신뢰도 감소, 재검사에 대한 문제점을 해결할 수 있을 것이라고 생각되며 motion correction에 제공되는 다양한 프로그램 개발과 임상 적용에 대한 광범위한 연구가 현실적으로 필요하며 향후 지속적인 연구가 기대되는 바이다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.91-98
• /
• 2000

The fuels of water-in-oil emulsion have a potential of reducing PM(Particulate Matter) and NOx emissions, and increassing combustion efficiency in the furnaces and the burners. For making the most of the beneficial of the secondary atomization due to the microexplosion, the water droplets distributed in the oil must have the optimal sizes. The purpose of this paper is to investigate the water droplet size distribution characteristics of the different types of the static mixers. For analysing the size distribution characteristics efficiently, image analysis system was constructed and an appropriate image processing algorithm was developed. Two kinds of static mixers: Kenics type and RF type, were tested. As a results, RF type static mixer shows a better characteristics in the mean drop sizes, particularly in the condition of high water content.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.904-911
• /
• 2001

The fuels of water-in-oil emulsion have a potential of reducing PM(Particulate Matter) and NOx emissions, and increasing combustion efficiency in the furnaces and the burners. For making the most of the beneficial of the secondary atomization due to the microexplosion, the water droplets distributed in the oil must have the optimal sizes. The purpose of this paper is to investigate the water droplet size distribution characteristics of the different types of the static mixers. For analysis the size distribution characteristics efficiently, image analysis system wes constructed and an appropriate image processing algorithm was developed. Two kinds of static mixers: Kenics type and RF type, were tested. As a results, RF type static mixer shows a better characteristics in the mean drop size, particularly in the condition of high water content.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.5-7
• /
• 1991

We have developed an efficient and robust image reconstruction algorithm for static impedance imaging. This improved Newton-Raphson method produced more accurate images by reducing the undesirable effects of the ill-conditioned Hessian matrix. We found that our electrical impedance tomography (EIT) system could produce two-dimensional static images from a physical phantom with 7% spatial resolution at the center and 5% at the periphery. Static EIT image reconstruction requires a large amount of computation. In order to overcome the limitations on reducing the computation time by algorithmic approaches, we implemented the improved Newton-Raphson algorithm on a parallel computer system and showed that the parallel computation could reduce the computation time from hours to minutes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.527-532
• /
• 2010

This paper is concerned with the measurement of static and dynamic displacement by image processing(IP) and study for prediction method of velocity and acceleration. To measure the displacement visually, the measurement system consists of a telephoto zoom camera, ccd image device and a computer. The specific target on the white board is used to calculate the displacement of the structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the pixel-size of image. In this paper, we developed for the displacement measurement using the image processing method. The proposed method enables us to measure the vibration measurement, velocity and acceleration directly without any contact. The current resolution of the displacement measurement is limited to 1/100 millimeter scale.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.112-119
• /
• 2011

This paper is concerned with the measurement of static and dynamic displacement by image processing(IP) and study for prediction method of velocity and acceleration. To measure the displacement visually, the measurement system consists of a telephoto zoom camera, CCD(charge coupled device) image device and a computer. The specific target on the white board is used to calculate the displacement of the structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the pixel-size of image. In this paper, we developed for the displacement measurement using the image processing method. The proposed method enables us to measure the vibration displacement, velocity and acceleration directly without any contact. The current resolution for the displacement measurement can be seen from the results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1025-1028
• /
• 1999

After detecting the edge which is applying the morphological operators to the hybrid FCNN, we could analyze and compare. The hybrid FCNN is completely removed to the noise in the image, and worked in order to obtain the result image which is closest to the original image. Also, the morphological operator is applied to the image as the method in order to detect more good the edge than the conventional edge. FCNN which is the pipeline type is completely suitable to detecting the image processing as well as the hardware size. In this paper. we would make the structure elements of the morphological operator the variable template and the static template, and compare with the edge enhancement of two images. After being the result which is applying the variable template morphological operator and the static template morphological operator to the image, we could know that the edge images applying the variable template is superior in a edge enhancement side.

• Journal of Korea Trade
• /
• 제25권2호
• /
• pp.178-195
• /
• 2021

Purpose - This study aims to analyze consumer in the multidimensional aspect of a combination of corporate image and brand personality in order to identify the structural causal relationship between consumer choice and corporate image and brand personality. Design/methodology - This study combined theoretical literature studies with empirical field studies using questionnaire survey methods. To achieve this objective, a hypothetical causal model consisting of three potential variables and nine measurement variables was created based on prior research, and a structural equation model was used to identify the suitability of the model. Findings - The hypothetical model established by this study was judged to be generally appropriate. In particular, corporate image was shown to have significant static direct effects on consumer choice and brand personality. It was also shown that brand personality had a direct static effect on consumer choice, and that corporate image has an indirect significant impact on consumer choice by moderating brand personality. Originality/value - Previous papers have mainly focused on one-dimensional studies of various images, such as companies and brands. However, this paper used a model that analyzed consumer choice through multi-clue information rather than corporate images as the only clue to consumer choice.