• 전자공학회논문지A
• /
• 제30A권7호
• /
• pp.75-81
• /
• 1993

In this paper, New type of Static Edge Triggered D Flip-Flop Circuits which are effective for the sequencial selecting and addressing of Matrix type Electrodes being applied to Flat Display Devices is proposed by the Design Technique using the Transmission Characteristics of Feedback Transistors and Charge Back Up Function. These Circuits composed of 2-4 less transistors in number than Conventional Static D Flip Flop's have some advantages that the Maximum Transition Time of Clock Signals allowed is increased by 100-450 times more than that of the Conventional circuit at 100KHz Clock Frequence and Circuit Safety is much increased by making the wider ranges, 1-4V, of Clock Levelas a Non-operating periods than 3-3.2V ranges in case of the Conventional Circuit at 10MHz clock frequence. By these advantages, These circuits can be very effectively used in case that clock signal has long transition time, especially on the low frequency operation.

• Membrane and Water Treatment
• /
• 제3권4호
• /
• pp.231-242
• /
• 2012

The performance of a nanofiltration membrane for treatment of a low-level radioactive liquid waste was investigated through static and dynamic tests. The liquid waste ("carbonated water") was obtained during conversion of $UF_6$ to $UO_2$. In the static tests membrane samples were immersed in the waste for 24, 48 or 72 h. The transport properties of the samples (hydraulic permeability, permeate flow, selectivity) were evaluated before and after immersion in the waste. In the dynamic tests the waste was permeated in a permeation flow front system under 0.5 MPa, to determine the selectivity of NF membranes to uranium. The surface layer of the membrane was characterized by zeta potential, field emission microscopy, atomic force spectroscopy and infrared spectroscopy. The static test showed that the pore size distribution of the selective layer was altered, but the membrane surface charge was not significantly changed. 99% of uranium was rejected after the dynamic tests.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.617-625
• /
• 2005

The purpose of this study was to develop functional and environment-friendly polyester fabric by irradiating Ultra-Violet, which was produced by the low-pressure mercury lamp. UV irradiation was conducted with various treatment times and distances. Also, pretreatments of solvents and photoinitiator were used to improve the surface modification effects. The effects of UV irradiation on the moisture regain were found to increase gradually with increase of UV treatment time and decrease of treatment distance. Compared the effects of UVC and UVA, UVC was more effective than UVA. Moisture regain and wicking of PET was increased after UV treatment in our experimental condition. And owing to increasing of moisture regain, static charge was decreased. Pretreatment of solvents such as methanol, ethyl ether and addition of photoinitiator such as Benzophenone accelerated surface modification. The moisture regain was increased but wicking was decreased with pretreatment and addition of photoinitiatior. Therefore it is considered as inappropriate f3r clothing because of wicking effects. Yellowness, tensile strength and elasticity slightly decreased after UV irradiation.

• 대한화학회지
• /
• 제30권2호
• /
• pp.172-180
• /
• 1986

치환-벤조산, -베젠 및 -나프탈렌의 세 계열에 대해 LCAO MO법으로 Hammett치환기 상수를 해석하였다. Hammett ${\sigma}$값은 이론적으로 유도효과와 공명효과의 독립적인 기여의 합으로 취급됨을 알았다. 즉, 유도효과를 정적유도효과(static inductive effect, Is)와 동적유도효과 (dynamic inductive effect, Id)로 나누어 각각 net charge 및 근사자기편극률 지수로 취하고 공명효과로서 치환 분자와 비치환분자의 HOMO에너지 차$({\Delta}E^{HOMO})$로 취하였으며 계산결과 Hammett ${\sigma}$값은 정적유도효과, 동적유도효과 및 ${\Delta}E^{HOMO}$의 합에 의존됨을 알았다.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.42-51
• /
• 1997

The purpose of this article is to investigate the effect of $O_{2}$ low temperature plasma treatment oft chitosan treatment of polyester fabrics. Moisture regain, static charge, crease resistance and reduction ratio of the treated fabric were measured. The results of this study were as follows: The add-on ratio and. the moisture regain of polyester fabrics treated with chitosan after treated by plasma(CP PET) were higher than those of polyester fabrics treated with only chitosan(C PET). The static charge of polyester fabrics decreased greatly with increasing the concentration of chitosan. A durability for laundering of CP PET was higher than those of C PET. The crease resistance of polyester fabrics decreased with ihcreasing the concentration of chitosan continuously. CP PET had higher decreasing rate and better durability than C PET. It showed that chitosan-treated polyester fabrics had over 90% reduction ratio after 10 times of laundering, and CP PET had better reduction ratio than C PET.

• 센서학회지
• /
• 제7권2호
• /
• pp.140-146
• /
• 1998

정전기는 고집적 반도체소자의 제조공정에서 제품의 제조수율을 감소시키거나, 정전하에 의해 가스폭발이나 화재 등을 일으키는 원인이 되므로 정전기를 제거하기 위한 수단이나 장치가 필수적으로 요구된다. 본 논문에서는 전하중화장치의 사용시간 경과에 따른 침전극 마모 및 분진부착 특성에 대해서 실험적으로 연구하였다. 또한 전하중화장치의 침전극의 마모 최소화와 발생이온량의 정량적인 제어를 위해 인가전원을 종래의 교류전원 대신에 고주파 펄스전원으로 하여 펄스주파수 및 펄스의 시비율을 변화시킴으로서, 펄스전력을 유효하게 제어할 수 있었으며, 또 펄스전원을 사용함으로서 전하중화장치의 이온 발생특성을 크게 할 수 있음을 실험적으로 확인하였다.

• 한국안전학회지
• /
• 제5권1호
• /
• pp.57-66
• /
• 1990

The purpose of this study is to investigate electrostatic charge condition and possibility of electrostatic hazards in case of putting on synthetic smocks and antistatic garments for the purpose of prevention of electrostatic hazards due to a human body electrical charge. It is shown in case of a synthetic smocks, electrostatic voltage by friction is about 2,900 (V), half life period is 12 second, and electrostatic charge is 1.4―1.8 ($\mu$ C). When putting on a synthetic smocks, electrostatic voltage is 2,500―2,800(V). When putting on a jumper of chemical fiber, electrostatic voltage is 8,000(V) . It is, therfore, possible to cause a electrostatic hazards. It is also shown in case of a antistatic garments, electrostatic voltage by friction is 87(V) ―280(V) (washing 90 times), half life period is 3―5 second, and electrostatic charge is 0.24―0.28($\mu$ C) which is much lower than 0.6($\mu$ C) limitation of fire and explosion occurance. When putting on a antistatic garments, electrostatic voltage is 10(V) ―125(V). In conclusion, it is shown when putting on a antistatic garments it is possible to prevent a electrostatic hazards such as fire or explosion due to human body, to prevent a destruction of semiconductor elements and capacity decline, and to prevent a misoperation of automation facilities and semiconductor electric and electronic products.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.52-60
• /
• 2015

Static electricity is an imbalance of electric charges within or on the surface of a material. All packed items that are particularly sensitive to static discharge must be protected by antistatic treatment. Otherwise, static electricity generated by an electrical insulator may cause serious damages to some sensitive electronics. In order to remove or prevent a buildup of static electricity, packed items must be treated with the application of an antistatic agent, which helps any excess charge to be evenly distributed. Functional pulp tray used for packing of electronic goods was developed with application of an antistatic agent. As the concentration of the antistatic agent increased, charging voltage and surface resistance of molded pulps decreased. The increase of humidity in surrounding atmosphere around molded pulps led to the decrease of accumulation of static charges. In conclusion, the surface treatment of the antistatic agent not only reduced or eliminated buildup of static electricity in the surface, but also prevented generation of tiny dirts from molded tray.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1606-1616
• /
• 1989

In this paper, the design of DYNAMIC CMOS ARRAY LOGIC which has both advantages of dynamic CMOS and array logic circuits is proposed. The major components of DYNAMIC CMOS ARRAY LOGIC are two-stage dunamic CMOS circuits and an internal clock generator. The function block of dynamic CMOS circuits is realized as a parallel interconnection of NMOS transistors. Therefore the operating speed of DYNAMIC CMOS ARRAY LOGIC is much faster than the one of the conventional dynamic CMOS PLAs and static CMOS PLA. Also, the charge redistribution problem by internl delay is solved. The internal clock generator generates four internal clocks that drive all the dynamic CMOS circuits. During evaluation, two clocks of them are delayed as compared with others. Therefore the race problem is completoly eliminated. The internal clock generator also prevents the reduction of circuit output voltage and noise margin due to leakage current and charge coupling without any penalty in circuit operating speed or chip area utilization.

• 대한가정학회지
• /
• 제17권4호
• /
• pp.23-28
• /
• 1979

In order to measure the change of constructional and some properties of knitted under wears by laundry, constructional properties, such as fabric count , yarn count, loop length and cover, factor, and some properties , such as shrinkage, tearing, strength, air permeability, electrostatic charge of under wears sold in the market were tested. The results of the experiment can be summarized as follows.1. Interlock and rib were increased in wale direction after laundry and decreased in course direction , plain was decreased, in both direction after laundry. 2. Loop form of plain was changed more than those interlock and rib after laundry. 3. Tearing strength was decreased 51% in wale direction, and 70% in course direction after 20 times laundry. Air permeability was generally increased. 4. Electro static charge was increased 9 times after laundry.