• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1647-1650
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was 16${\times}$8 array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue lift curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.108-111
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16\;{\times}\;8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.375-382
• /
• 2001

This study is attempted to predict experimentally the fatigue crack propagation behavior of two-span beams with steel fibrous for various steel fibrous contents. The static tests and the fatigue tests were performed on a series of SFRC(steel fibrous reinforced concrete) to investigate the fatigue behavior of SFRC varying with the steel fibrous contents. Through this test, the diagonal cracking loads, ultimate loads, deflections, strains of concrete and steels. Fatigue crack length were measured by the eye-observation. As a result of test, A model for S-N relationship, and propagation life of fatigue crack of SFRC was proposed. The crack growth and failure of SFRC beams were studied.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.39-44
• /
• 2003

The welded specimens were made by butt welding of the 2 wires of 50mm length using the pulsed YAG laser. The laser welded wires were tested for investigating the shape memory effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was Investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.745-757
• /
• 2023

In order to study the fatigue performance of the flat steel plate-lightweight aggregate concrete hollow composite bridge slab subjected to fatigue load, both static test on two specimens and fatigue test on six specimens were conducted. The effects of the arrangement of the steel pipes, the amplitude of the fatigue load and the upper limit as well as lower limit of fatigue load on failure performance were investigated. Besides, for specimens in fatigue test, strains of the concrete, residual deflection, bending stiffness, residual bearing capacity and dynamic response were analyzed. Test results showed that the specimens failed in the fracture of the bottom flat steel plate regardless of the arrangement of the steel pipes. Moreover, the fatigue loading cycles of composite slab were mainly controlled by the amplitude of the fatigue load, but the influences of upper limit and lower limit of fatigue load on fatigue life was slight. The fatigue life of the composite bridge slabs can be determined by the fatigue strength of bottom flat steel plate, which can be calculated by the method of allowable stress amplitude in steel structure design code.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.15-21
• /
• 2011

복합재료가 건설 분야에서 보다 광범위하게 이용되기 위해서는 일반 기술자에게 이론을 쉽게 하기 위한 연구와 시험을 통한 데이터의 축적이 필요하다. 따라서 본 논문에서는 복합재료인 FRP 바닥판 부재의 따른 정적 및 피로성능을 평가하고 향후 FRP 바닥판의 해석 및 설계기준의 기초 자료를 제공하여 복합재료의 구조재 활용을 위한 기반기술을 제공하고자 하였다. 정적시험 결과 섬유방향 시험체가 섬유직각방향 시험체보다 큰 강성을 갖고 있으며 데이터 값이 훨씬 수렴되는 경향을 보이는바 이는 파괴과정에서 기지 배열에 따른 구조 특성으로 보다 안정적인 거동을 보이는 것을 알 수 있었다. 피로시험 결과 섬유방향 시험체는 섬유직각방향 시험체가 초기에 균열이 발생하는 것과 달리 시험체의 반복횟수가 증가하면서 파괴 직전에 균열을 확인할 수 있었으며, 접착면이 떨어지는 양상을 보였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.363-366
• /
• 2003

Concrete structures are becoming larger, higher, longer and more specialized. Currently, one of the biggest problems of concrete structures is the occurrence of cracks. Cracks are a serious structural problem that decreases durability and causes external damage leading to corrosion. The specimen without steel fiber fractured between 60-70% of the static ultimate strength (the fatigue strength to one million cycles on the number of cycles from the S-N curve was 73.7% and the fatigue strength to two million cycles was approximately 67.2%). The specimen with steel fiber fractured at 65-80% of the static ultimate strength, concluding fatigue strength to one million cycles around 74.6% and to two million cycles around 75%.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.602-608
• /
• 2021

최근에는 다양한 보강재를 매트릭스에 혼입하는 방식으로 콘크리트 재료에 다양한 유형의 성능을 부여하는 연구 개발이 이루어지고 있다. 다량의 섬유를 사용하여 배합된 고인성 콘크리트는 다중균열분산 특성을 가지고 있으며, 이에 대한 다양한 연구가 수행되고 있다. 하지만 정적 하중에 대한 연구가 집중되고 있으며, 반복적인 하중에 대한 연구는 부족한 실정이다. 본 연구에서는 섬유비율을 달리한 고인성 콘크리트로 보를 제작하였고, 정적 휨시험과 피로 휨시험을 수행하였다. 그 결과 섬유 함량이 휨 거동에 미치는 영향을 분석하였고, 고인성 콘크리트의 하중-수명 관계를 S-N관계식으로 제안하였다. 2%의 섬유 혼입량으로 고인성 특성의 콘크리트를 배합할 수 있었다. 0.5% 섬유를 추가하는 경우 최대 휨강도는 유사하지만 휨인성은 2배 가까이 향상되는 것으로 나타났다. 반면, 두 배합의 피로수명은 큰 차이를 보이지 않았다.

• Composites Research
• /
• 제12권3호
• /
• pp.26-35
• /
• 1999

복합재료내의 결함을 원공노치로 가정하고 노치의 크기에 따른 정하중 및 피로실험을 수행하였다. 원공이 존재하는 복합재료에 대하여 다양한 수리기법을 적용하여 정하중 실험을 수행하였다. 수리기법중에 precured double patched 방식과 cure-in-place 방식의 수리는 가장 우수한 결과를 보여 평활재의 약 60∼80%의 강도복구효과를 보였다. 우수한 결과기법을 나타낸 수리기법중에 보다 실제적인 방식이라고 사료되는 cure-in-place 방식으로 수리된 재료에 대하여 피로실험을 수행하였다. 수리된 재료는 정하중 및 피로의 경우에 있어서 향상된 결과를 보였으며 피로시 평활재의 거동을 나타낸다. 참고계수를 도입하여 회귀분석된 피로수명예측식(MFLPE's)은 수리된 시편에 비해 타 예측식에 비해 더 좋은 결과를 나타낸다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.139-144
• /
• 2002

Ti-50.9at%Ni wires were welded using pulsed YAG laser. The laser welded wires were tested for investigating the shape memo교 effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.