• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.111-114
• /
• 2000

Single Electron Transistor Logic (SETL) can be characterized by HSPICE simulation using a SPICE macro model. First, One unit SET is characterized by Monte-carlo simulation and then we fit SPICE macro-modeling equations to its characteristics. Second, using this unit SET, we simulate the transient characteristics of two-input NAND gate in both the static and dynamic logic schemes. The dynamic logic scheme shows more stable operation in terms of logic-swing and on/off current ratio. Also, there is a merit that we can use the SET only as current on-off switch without considering the voltage gain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1055-1059
• /
• 1992

Instantaneous Voltage Control of inverter for uninterruptible power supply(UPS) is presented. In order to improve the transient response, the authors propose a control scheme based on a double regulation loop with sinusoidal hysteresis band. And also, using 8097 single chip microprocessor, software synchronization and static switch control scheme is impremented with minimal hard ware structure.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.557-567
• /
• 1990

This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter with frequency control. The natural commutation of all switch element is realized when the switching frequency is below the resonant frequency of the tank circuit, and the analysis is limited to only this region. For the analysis method, state plane technique is adopted, and each operation mode is defined from normalized switching frequency Fsn. Under this condition, circuit performance is analyzed ideally. The physical characteristics of the series resonant converter is easily grasped by this analysis method with frequency control and this analytical results are directly applicable to the actual converter design. The validity of the analysis is verified by comparing with experimental results and the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis.

• 전기저널
• /
• 통권277호
• /
• pp.69-77
• /
• 2000

최근 전력설비 운용상의 여러 가지 과제에 대한 유망한 해결책으로서 파워일렉트로닉스 기기를 사용한 FACTS(Flexible AC Transmission System)가 주목을 받고 있다. 그 중에서도 자려식 변환기를 사용한 FACTS기기는 계통의 유효전력$\cdot$무효전력을 계통의 상태에 의존하지 않고 자유롭게 제어할 수 있어, 계통운용의 유연성을 비약적으로 확대할 수 있는 가능성이 있다. 미쓰비시전기는 전력기기간 계통에서의 자려식 변환기 응용의 파이어니어로서 1991년 간사이전력(주) 태산개폐소에 80Mvar SVG(전지형 무효전력발생장치)를 납품하였으며 또한 자원에너지청의 ''연계강화기술개발'' 보조사업으로 도쿄전력(주)을 비롯하여 전력회사 각사, 전원개발(주)와 (재)전력중앙연구소의 지도 하에 3단자 BTB(Back to Back) 실증시스템용으로 세계 최초의 6인치 GTO(Gate Turn-off Thyristor)를 사용한 53MVA의 자려식 변환기를 제작납품하여 수백MVA 클래스의 자려식변환기 제작기술을 확립하였다. 또한 최근에는 동사가 개발한 신소자 GCT(Gate Commutated Turn-off Thyristor)는 지금까지 대용량 자려식 변환기의 커다란 과제였던 운전손실을 반감할 수 있을 것으로 기대되고 있다. 한편 배전 분야에서는 전압변동, 고조파, 순간전압강하 등의 과제가 증가하고 있어, 미쓰비시전기는 이에 응할 수 있는 파워일렉트로닉스 기기로서 콤팩트 SVG(Static Var Generator), SSTS(Solid-state Transfer Switch), 액티브필너를 다수 납품하여 전력품질문제 해결에 공헌하고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.155-156
• /
• 2015

Recently, electricity consumption has rapidly increased along with economic growth. The operating strategy using emergency generator is aimed, to resolve a demand response management. For strategy of peak shedding using emergency generator, it is essential to introduce the fast transfer switching device. One of the most effective solutions is to use a static transfer switch (STS) based on thyristor. However, the characteristic of natural commutated SCR thyristor should anticipate short duration voltage sag. STS system thus requires more than a quarter cycle to successfully complete transfer process. This paper proposes the operation scheme of the STS system using the forced-commutation technique to mitigate instantaneous voltage sag during peak transfer process. Proposed STS system improved turn-off characteristic thus accomplishes the peak load shedding satisfied power quality. Performance of the proposed STS system is evaluated using electromagnetic transient program (EMTP) to confirm the effectiveness.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.561-570
• /
• 2010

This paper presents an advanced dynamic simulation model of a proton exchange membrane fuel cell for the optimal design of a fuel cell power conditioning system (FC-PCS). For the development of fuel cell models, the dynamic characteristics of the fuel cell are considered, including its static characteristics. Then, software fuel cell simulation is realized using Matlab-Simulink. Specifically, the design consideration of PCS (i.e., power semiconductor switch, capacitor, and inductor) is discussed by comparatively analyzing the developed simulator and ideal DC source. In addition, a cosimulation between the fuel cell model and PCS realized using the PSIM software is performed with the help of the SimCoupler module. Detailed analysis and informative simulation results are provided for the optimal design of fuel cell PCS.

• 대한전기학회논문지
• /
• 제39권9호
• /
• pp.934-943
• /
• 1990

There are no turn-on losses in the series Resonant Converter which operates above the resonance frequency, and the commutation stress on the switched component is low. For a given Series Resonant Converter with specified load resistance, the output voltage is a function of the operation frequency. This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter, which is operating above the resonant frequency, with frequency control. For the analysis method, state plane technique is adopted, and the circuit operation is defined from normalized switching frequency, Fsn. Under this condition, circuit performance is analyzed ideally. The validity of the proposed analysis is verified by comparing with experimental results, the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis, and the stress quantity added to switch component is shown.

• 전기의세계
• /
• 제53권7호
• /
• pp.18-18
• /
• 2004

수용가측의 전력품질에 대한 관심이 나날이 높아지고 있는 가운데 공장자동화, 및 컴퓨터의 보급확산으로 배전계통에 비선형 부하와 같은 악성부하들이 증가되고 있으며, 다른 한편으로는 공정제어기 및 인버터, 마이크로 프로세서와 같은 전력품질에 매우 민감한 부하기기들이 불특정 다수 분산적으로 도입ㆍ활용되고 있다. 이에 따라서 최근 전 세계적으로 전력품질에 의한 경제적 피해 사례가 보고되고 있어, 세계 선진국의 전력관련 산업체 및 연구소를 중심으로 한 전력품질 보상기기 개발에 대한 연구가 활발히 진행되고 있다. 이들에 대한 대표적인 기기들로서는 병렬형 전력품질 보상기기인 STATCOM(Static Compensator)과 직렬형 전력품질 보상기기인 DVR(Dynamic Voltage Restorer), 고속 전력 절체 스위치인 SSTS(Solid State Transfer Switch) 등을 열거할 수 있다. (중략)

• 전기의세계
• /
• 제53권7호
• /
• pp.31-35
• /
• 2004

본 고에서는 현재 개발 및 필드테스트되고 있는 전력품질 보상기기인 STATCOM(Static Compensator), DVR(Dynamic Voltage Restorer), 고속전력절체스위치 SSTS(Solid State Transfer Switch)들이 국내 22.9kV급 배전계통에 도입되어 운용될 경우, 배전계통의 전력품질상의 외란, 즉 voltage sag, voltage swell, interruption등에 대해서도 부하기기가 문제없이 잘 동작할 수 있어야 하는 전력품질향상기기의 성능(전력품질향상기준)에 대한 평가방법 에 대하여 기술하고자 한다. 먼저, 전력품질향상기기인 DVR, D-STATCOM, SSTS들이 만족해야할 전력품질향상기준을 국내 전력 품질 실태를 고려하여 제시하고, 또한, 이들 전력품질향상기기에 대한 국내 배전계통적용에 적합한 성능평가방안을 제안/소개하기로 한다. (중략)

• 한국조명전기설비학회지:조명전기설비
• /
• 제6권6호
• /
• pp.49-57
• /
• 1992

This paper proposes a Intel 8097 single-chip microprocessor based instantaneous voltage control scheme of inverter for UPS(Uninterruptible Power Supply). There microprocessors are used to control the output voltage and frequency of the inverter, the synchronization with by-pass, and the switching of the static switch. And the status and operating conditions of UPS systems is monitored by micro processor. The inverter output voltage is controlled instantaneously with a double regulation loop so that it has very good dynamic response for the varying loads or nonlinear loads as a rectifier. And also, the software and hardware of control system is described. From simulation and experimental results, it is shown that the proposed scheme has very good performance.