• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.5
• /
• pp.56-64
• /
• 1994

본 논문은 직류초퍼구동 전동기 제어시스템을 해석 대상으로 하여 전류 연속모드와 전류 불연속모드의 양 모드 동작시에 있어서의 해석을 상태변수법과 상태평균화법을 적용하여 해석하였으며 두 해석 방법의 결과를 비교 검토함과 동시에 상태평균화법에 의하여 시스템의 해석이 근사적이지만 해석이 용이하다는 것을 나타내고 있다. 또한, 본 시스템의 궤환루프 제어시스템에 있어서 상태평균화법을 이용한 평형점 근방의 근사 선형화 방법을 적용함으로써 전달 매트릭스의 형태로 동특성을 표현할 수 있으며, 이것을 이용한 선형 제어법을 적용하여 궤환루프 제어계의 설계기법을 제시하고 있다.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.77-82
• /
• 2013

By using simulation, compensating characteristics of a voltage sag compensator utilizing single-phase matrix converter is examined. System configuration is described and mathematical model of single-phase matrix converter is derived by using the state space averaging method. In addition, the single-phase matrix converter is stabilized by phase-lead compensation. Finally, compensating characteristics of the compensator is investigated for 500 W R-L load and it is demonstrated that the compensator can operate correctly for loads for the range of power factor 0.6 (lagging) - 0.8 (leading) and for up to 50% voltage sag.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2008

A dynamic model for II-SEPIC(Isolated Inverse-SEPIC) is developed based on the state-space averaging method and its control characteristics are investigated in this paper. Equations for circuit design of II-SEPIC are derived through steady state analysis and the resulted circuit parameters are used in the consequent simulation and experiment works. A structure of control system is devised to obtain better control performance. In order to verify validity and effectiveness of the design equations and dynamic model derived, dynamic control responses of II-SEPIC system against line and load variation are illustrated in both simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.109-114
• /
• 2001

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method. In the future, properly designed controller for compensation will be constructed for maximum photovoltaic power tracking control.