• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.143-151
• /
• 2020

In the present article, we have analyzed five slags excavated from the Unified Silla period iron smelting site, i.e., location 4-2 of the Inje Bupyeong-ri site, to investigate the iron smelting process. The total Fe content of the slag excavated from the Inje Bupyeong-ri site ranged between 3.65 and 23.78 wt%, lower than that of typical slag, and deoxidation agent of the slag ranged between 65.92 and 88.96 wt%, higher than that of typical slag. These results suggest that the recovery rate of iron was significantly high. Furthermore, cristobalite was detected in most of the samples, and the furnace temperature, estimated by substituting the analyzed data into the FAS and FCS state diagrams, was confirmed as 1,600℃ or more. These results suggest that the operation at the Inje Bupyeong-ri site was performed at a temperature capable of producing cast iron by completely melting the carbon-containing iron. Observation of the microstructure showed that the iron fragments excavated at the Inje Bupyeong-ri site were identified as white cast iron. Steadite from the ternary iron-carbon-phosphorus system was observed in the white cast iron structure. These results show that indirect smelting was performed when the iron smelting by-products were produced. Based on the analysis results, it was confirmed that the Inje Bupyeong-ri site was the indirect smelting site in the Unified Silla period.

• Clean Technology
• /
• v.29 no.4
• /
• pp.244-248
• /
• 2023

Recently, displays play an important role in quickly delivering a lot of information. Research is underway to reproduce various colors close to natural colors. In particular, research is being conducted on the light emitting structure of displays as a method of expressing accurate and rich colors. Due to the advancement of technology and the miniaturization of devices, the need for small but high visibility displays with high efficiency in energy consumption continues to increase. Efforts are being made in various ways to improve OLED efficiency, such as improving carrier injection, structuring devices that can efficiently recombine electrons and holes in a numerical balance, and developing materials with high luminous efficiency. In this study, the electrical and optical properties of the seven-layer stacked structure rear-light emitting blue OLED device were analyzed. 4,4'-Bis(carazol-9-yl)biphenyl:Ir(difppy)2(pic), a blue light emitting material that is easy to manufacture and can be highly efficient and brightened, was used. OLED device manufacturing was performed via the in-situ method in a high vacuum state of 5×10-8 Torr or less using a Sunicel Plus 200 system. The experiment was conducted with a seven-layer structure in which an electron or hole blocking layer (EBL or HBL) was added to a five-layer structure in which an electron or hole injection layer (EIL or HIL) or an electron or hole transport layer (ETL or HTL) was added. Analysis of the electrical and optical properties showed that the device that prevented color diffusion by inserting an EBL layer and a HBL layer showed excellent color purity. The results of this study are expected to greatly contribute to the R&D foundation and practical use of blue OLED display devices.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.22-27
• /
• 2002

The 25 Watt hybrid MIC SSPA has been developed in the frequency rang from 1.6265 GHz to 1.6465 GHz for uplink of INMARST's earth station. To simplify the fabrication process, the whole system is designed of two parts composed of a friving amplifier and a power amplifier. The Motorolas MRF-6401 is used for driving part, the Motorolas MRF-16006 and MRF-16030 is used the power amplifier. We reduced weight and volume of high power amplifier through arranging the bias circuits in the same housing. The realized SSPA has more than 30 dB for gain within 20 MHz bandwidth, and the voltage standing wave ratios(VSWR) of input and output port are less than 1.7, respectively. The output power of 44 dBm is achieved at the 1 dB gain compression point of 106365 GHz These results reveal a high power amplifier of 25 Watt which is the design target. The Proposed SSPA manufacture techniques in this paper can be applied to the implementation of high power amplifiers for some radars and SCPC.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.6
• /
• pp.468-472
• /
• 2015

Background : Chinese matrimony vine (Lycium chinense Mill.) is a deciduous shrub belonging to the Solanaceae. The leaves are used as an alternative raw material replacing dried fruits associated with high production costs in many industires. The aim of this experiment was to determine the effect of drying temperature on the leaves used in the manufacture of functional products. Methods and Results : The leaves of Chinese matrimony vine were harvested when the plant height reached 60 - 70 cm in the spring and treated at four different temperatures ($40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$ and $70^{\circ}C$). The time to reach the desiccation state of 20% was 63 h at $40^{\circ}C$, 37 h at $50^{\circ}C$, 17 h at $60^{\circ}C$ and 11 h at $70^{\circ}C$. The drying rate per hour was 1.28% at $40^{\circ}C$, 2.25% at $50^{\circ}C$, 4.94% at $60^{\circ}C$ and 7.60% at $70^{\circ}C$. No significant difference were observed in ash, crude fat, polyphenol or rutin content of treated samples. Crude protein and betaine content decreased with higher dry temperatures. Nitrogen free extract of the treated samples increased with higher drying temperatures. Conclusions : Taking into consideration drying time, drying rate, color value, energy consumption and functional ingredients is advantageous to dry the leaves of the Chinese matrimony vine at $60^{\circ}C$ using a hot air agricultural dryer.

• The Southeast Asian review
• /
• v.27 no.2
• /
• pp.185-212
• /
• 2017

The National League for Democracy (NLD) has restored a civilian government since the military had taken political power in 1962 as a result of general elections on 7, November 2015. But Daw Aung San Suu Kyi could not take part in the presidential election due to some restraints in constitution, so new government created the state counsellor position and the ministry of sate counsellor's office against military's resistance. It never publicized whether the military has to back to barracks including abolish of military's occupying the parliament seats. The ruling party is still taking laissez-faire to the military's political and economic role. The National level Ceasefire Agreement called the 21st Panglong conference launched in the end of August for a week, but stakeholders only insisted their demands. Rohingya issue is not involved in the 21st Panglong conference which aims to achieve national unity. The U.S. fully lifted a comprehensive sanction toward Myanmar since 1993, Japan promised huge grant assistance succeeding the former quasi civilian government. China strived to restore alienated relations of two countries. Although Korea kept Official Development Assistance, the summit which was planed two times in 2016 did not hold. The civilian government announced twelve points of developmental agenda in July 2016, instead of destroying the national development policy of the Thein Sein government. This agenda only showed the direction of policy not road map which was the same trend of the former government. The main direction of economic development stressed agriculture but manufacture like light industry was ignored.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.857-867
• /
• 2017

This study was performed to encapsulate low molecular weight marine collagen and ${\gamma}$-aminobutyric acid (GABA)-producing lactic acid bacteria to inhibit degradation and improve survival rate during exposure to adverse conditions of the gastro-intestinal tract. Calcium-alginate method was used for the manufacture of a double-layered coated capsule. The inner core material was composed of collagen and lactic acid bacteria, and the coating materials were alginate and chitosan. The sizes and shapes of the double-coated capsule were affected mainly by centrifuge speed and pH. Manufactured capsules were observed with a scanning electron microscope and by confocal laser scanning microscopy to confirm the micromorphological changes of capsules and bacterial cells. As a result, double-layered coated capsules were not degraded at pH 1.2, whereas degradation occurred at pH 7.4. In addition, GABA and collagen were maintained in stable state at pH 1.2. Therefore, double-layered coated capsules developed in this study would not be degraded in the stomach and could be stably delivered to the small intestine to benefit intestinal and dermatic health.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.403-425
• /
• 2015

The Chicago Convention and Annexes have become the basis of aviation safety regulations for every contracting state. Generally, the State's aviation safety regulations refer to the Standards and Recommended Practices(SARPs) provided in the Annexes of the Chicago Convention. In order to properly reflect international aviation safety regulations, constant studies of the aviation fields are of paramount importance. This Paper is intended to identify the main differences between korean and foreign regulation and suggest a few amendment proposals on Mixed-fleet Flying(at or more two aircraft type operation) of flight crew. Comparing with these regulations, the korean regulations and implementations have some insufficiency points. I suggest some amendment proposals of korean regulations concerning Mixed-fleet Flying that flight crew operate aircraft of different types. Basically an operator shall not assign a pilot-in-command or a co-pilot to operate at the flight controls of a type of airplane during take-off and landing unless that pilot has operated the flight controls during at least three take-offs and landings within the preceding 90 days on the same type of airplane or in a flight simulator. Also, flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. An operator shall ensure that piloting technique and the ability to execute emergency procedures is checked in such a way as to demonstrate the pilot's competence on each type or variant of a type of airplane. Proficiency check shall be performed periodically. When an operator schedules flight crew on different types of airplanes with similar characteristics in terms of operating procedures, systems and handling, the State shall decide the requirements for each type of airplane can be combined. In conclusion, it is necessary for flight crew members to remain concurrently qualified to operate multiple types. The operator shall have a program to include, as a minimum, required differences training between types and qualification to maintain currency on each type. If the Operator utilizes flight crew members to concurrently operate aircraft of different types, the operator shall have qualification processes approved or accepted by the State. If applicable, the qualification curriculum as defined in the operator's Advanced Qualification Program could be applied. Flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. The difference among different types of airpcrafts decrease and standards for these airpcrafts can be applied increasingly because function and performance have been improved by aircraft manufacture company in accordance to basic aircraft system in terms of developing new aircrafts for flight standard procedure and safety of flight. Also, it becomes more necessary for flight crews to control multi aircraft types due to various aviation business and activation of leisure business. Nevertheless, in terms of flight crew training and qualification program, there are no regulations in Korea to be applied to new aircraft types differently in accordance with different levels. In addition, it has no choice different programs based on different levels because there are not provisions to restrict or limit and specific standards to operate at or more than two aircraft types for flight safety. Therefore the aviation authority introduce Flight Standardization and/or Operational Evaluation Board in order to analysis differences among aircraft types. In addition to that, the aviation authority should also improve standard flight evaluation and qualification system among different aircraft types for flight crews to apply reasonable training and qualification efficiently. For all the issue mentioned above, I have studied the ICAO SARPs and some state's regulation concerning operating aircraft of different types(Mixed-fleet flying), and suggested some proposals on the different aircraft type operation as an example of comprehensive problem solving. I hope that this paper is 1) to help understanding about the international issue, 2) to help the improvement of korean aviation regulations, 3) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.213-226
• /
• 1993

In Korea, the urban studies of geography have mainly dealt with such a series of research as system of urban place and internal structure of urban area. The existing studies have been carried out with ecological approach. Ecologists, now a days, regard organiation and transfor-mation of the urban space as the process of invasion, succession, and segregation. However it is more proper that cities should be considered not as fragmantary objects, as some ecologists insist, but as synthetic ones in social structure. This research, with adopting a case of the renewasl of central area in Seoul, tried to make it clear that the formation and transition of the city is a product of social structure and examined polical and economic logic which exists in variation of urban space in detail. The results of this study are as follows; Urban renewal of central area is closely related with production and reproduction in capitalist society. In urban center, as business activities had increased since 1973 due to decen-tralization of production process, the necessity of reorganizing the land use in existing central area accordingly increased. The urban renewal program of central area in Seoul was inrroduced under such situation. The urban renewal of central area reflecting the capital logic has changed the central area with six hundred year's tradition. From the urban renewal of central area, not only was the central area, which traditionally had been mixed with various fun-ctions, simplified into the unitary area of busi-ness, but also physical landscape changed. As the land lot in renewal area expanded into regular shape, buildings became larger and taller. The program tremendously raised the price of related area. Aiming at these profits caused by the raised price, a great number of capitalists participated in the program. And as the benefit ratio of the manufacture sector continuously dropped with the economic recession, the pro-gram was carried out much more vigorously. That was because the idle capital accumulated during the recession was invested in property sector and was self-proliferated. The urban renewal raised the land value of central area and drove out the people living in this area. The people moved into the whole parts of the city resulting diffused squatter settlements. And the urban changes in central area were results of the policy of municipal authorities, who supported and systematized the changes lawfully and administratively, as well as reali-zation of capital logic. Due to the renewal policies of central area in Seoul, much more renewals by the only capitalists were carried out than those by the people themselves living in that area. The integration of land ownership in the law of urban renewal shows the reason of that. Moreover, the law allows the third deve-loper to participate in the tasks and admits the land expropriation rights. The municipal autho-rities guaranteed the profitability of the tasks through finacial aid, tax benifit, and relaxation of regulations for construction. As examined above, the changes in the land use of urban space have been led not by the ecological process of development of the city itself, but by the restructuring of capitalism and the intervention of the government authorities.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Journal of the Economic Geographical Society of Korea
• /
• v.8 no.1
• /
• pp.153-169
• /
• 2005

In this study, we analysed the state of the fisheries in Chungnam around 1910 from Hangook Susanji. As a result, there were about 30 ports in the west coast area in Chungnam, and we can classify their locations into 5 types Type I is located in small and mid sized rivers. Type II is located in a costal port. Type III is ports facing the open sea, and type IV is ports in a bay. Type V is ports on islands of coast. Species of fish are porges, mackerels, sting rays, croakers, hairtails, shrimps, etc. The base of fishing porge was Jukdo and Yeondo. The fishing banks of croakers are formed from Chilsantan, Jeonlado to the area of seashore, Chungnam. Hairtails were caught near all the areas of seashore. Salt manufacturing is done near all coasts of Chungnam, Seocheon-bay, Ungcheon-bay, Ocheon-bay, Anmyeon island, Taean, Dangjin area, etc represent this work. Especially, the salt which was produced in Taeangun was so famous that it was called ' Taeansalt'. In the Kum-river area there were 32 fishing villages. Freshwater fish were caught in the upper stream area and the mouth of Geumgang, down stream, was the center for producing Baengeo. There were 23 fishing villages, and the species consisted of croaker, hairtail, Forge, gray mullet, sting ray, sharks, anchovy, shrimps, etc in Biin-bay. The coast of Boryeong had about 33 fishing villages, but their fishing industry was not developed more than their good salt manufacturing. Though there are records that Chunsu-bay had 28 fishing villages, Taean peninsula and Garolim-bay had about 70 fishing villages, and Asan-bay area had about 55 fishing villages, they were developed a little, but not more than Weir fisheries or salt manufacture on the base of salt area and the tideland because these areas were just for farming. South of Anmyeon island of West coast island areas is the biggest area of Stow nets on stakes fishing and the island areas down mouth of Kum river were centers for producing porge.