• Preventive Nutrition and Food Science
• /
• v.12 no.3
• /
• pp.167-172
• /
• 2007

This study was conducted to determine the effect of hygienic processing (HP) on the reduction of microorganisms during manufacturing of saengshik with two vegetables (carrots and cabbage) and two grains (barely and glutinous rice) compared to general processing (GP). For GP, distilled water was used for washing raw materials and equipment. For HP, aqueous ozone (3 ppm) in combination with 1% citric acid and 70% alcohol were used for washing raw materials and the equipment, respectively. In carrots, after cutting, total aerobic bacteria (TAB), yeast and mold (YM) and coliforms were significantly increased to 5.19, 8.04 and 2.08 ($log_{10}$ CFU/g), respectively (p<0.05). Washing effectively reduced the increased microorganisms from cross contamination during cutting, but cross contamination increased with subsequent GP drying and milling procedures to 8.56, 8.27 and 3.71 ($log_{10}$ CFU/g) for TAB, YM and coliforms, respectively (p<0.05). On the other hand, HP washing of carrots with 3 ppm ozone in combination with 1% citric acid showed higher antimicrobial effect than GP washing, significantly decreasing the number of microorganisms (p<0.05). Further cross contamination did not occur through drying and milling due to cleaning the equipments with 70% alcohol prior to processing. After milling, the number of TAB, YM and coliforms were significantly decreased to 3.89, 4.47 and not detectable level ($log_{10}$ CFU/g), respectively (p<0.05). Similar results were observed in cabbage and grains. During storage for two months at different temperatures (22 or $4^{\circ}C$), there were no changes in numbers of spoilage microorganisms in the packaged saengsik after either processing. This suggests the importance of HP for the reduction of microorganisms during saengsik production, and demonstrates the effectiveness of disinfection at each processing stage in minimizing contamination levels to enhance microbial safety of saengshik products.

• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.576-581
• /
• 2021

To improve the shortcomings and expand the advantages of the single-roll melt drag method, which is a type of continuous strip casting method, the melt drag method with a molding belt is applied to AZ31 magnesium alloy. By attaching the forming belt to the melt drag method, the cooling condition of the thin plate is improved, making it possible to manufacture thin plates even at high roll speed of 100 m/min or more. In addition, it is very effective for continuous production of thin plates to suppress oxidation of the molten metal on the roll contact surface by selecting the protective gas. As a result of investigating the relationship between the contact time between the molten metal and the roll and the thickness of the sheet, it is possible to estimate the thickness of the sheet from the experimental conditions. The relationship between the thin plate thickness and the grain size is one in which the thinner the thin plate is, the faster the cooling rate of the thin plate is, resulting in finer grain size. The contact state between the molten metal and the roll greatly affects the grain size, and the minimum average grain size is 72 ㎛. The thin plate produced using this experimental equipment can be rolled, and the rolled sample has no large cracks. The tensile test results show a tensile strength of 303 MPa.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.243-244
• /
• 2022

In this paper, experiments were conducted on signal amplification of polymer capsules for application to Ground Penetrating Radar so as to enable real-time monitoring of polymer capsules inside concrete using the Morphology Dependent Resonance phenomenon. A TEM CELL and a vector network analyzer were used to analyze the difference in resonance frequency depending on the material of the sphere and the presence or absence of fracture. In order to manufacture a capsule of a size that can be measured using millimeter waves used in GPR, we manufactured a capsule with a 3D printer and analyzed the effects of the presence or absence of coating and the size of the capsule on the resonance frequency. Resonant frequency or signal amplification is more affected by diameter than coating. The capsule showing the highest amplification is the resin-coated 50 mm diameter capsule with a 316-fold increase and the lowest capsule is the uncoated 10 mm diameter capsule with a signal amplification of 11.9 times. These results demonstrate the potential of GPR to measure the position and state of self-healing capsules, which are small-sized polymers, in real time using millimeter waves.

• Journal of the Korea Furniture Society
• /
• v.24 no.2
• /
• pp.183-190
• /
• 2013

This article intends to explore the formation of furniture terms with the name of furniture, furniture materials, tools, and machinery from eight furniture companies manufacturing their own different furniture items. As a result of this study, the terms can be abstracted as four things as follows. First of all, the terminology that the furniture firms is are unified over 80 percent and has no problem on the communication among the companies. Especially office furniture all is using common words because the terms are almost fixed by an administration agreement relating to the Supply Administration. Second, the furniture terms being used at the fields are mixed with Korean, English, and Japanese, and this current state shows more at small businesses than at large businesses Third, the terms of foreign words, almost English, present 48 percent as 156 words among the total 325 terms. Japanese shows 6 percent as 21 terms but it tends to be handed down from mouth to mouth with inaccurate conditions. Finally, the formation of the terms are from the original words or English, from the combination of Korean and foreign words for convenience at the fields, and from being created as Korean newly in considering Korea's special situation.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.823-830
• /
• 1995

A reactive piloting policy for Flexible Assembly Lines (FAL) is proposed, where the sequencing of the operations as well as the assignment of tasks to manipulators are not predetermined but driven by the actual state of the FAL For all work-in-process coming from a manipulator, the next destination is determined by minimizing a temporal criterion taking into account the time needed to reach the destination, the load of the manipulator to reach, the durati on of the operation to be completed in the destination manipulator, and the availability of product components in this manipulator. The purpose of proposed piloting policy is to manufacture a given quantity of products as rapidly as possible by balancing the amount of work allocated to manipulators and to reduce the efforts required for scheduling the production of short series of diversified products. After introducing the characteristics of assembly processes and FAL modelization, the proposed algorithm is evaluated by simulations. The simulations of the proposed algorithm showed satisfactory results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.70-75
• /
• 2018

Smart Factory is an intelligent factory that can enhance productivity, quality, customer satisfaction, etc. by applying information and communications technology to the entire production process including design & development, manufacture, and distribution & logistics. The precise amount of data generated in a smart factory varies depending on the factory's size and state of facilities. Regardless, it would be difficult to apply traditional production management systems to a smart factory environment, as it generates vast amounts of data. For this reason, the need for a distributed big-data processing system has risen, which can process a large amount of data. Therefore, this article has designed a Gluster File System (GlusterFS)-based distributed big-data processing system that can be used in a smart factory environment. Compared to existing distributed processing systems, the proposed distributed big-data processing system reduces the system load and the risk of data loss through the distribution and management of network traffic.

• The Journal of the Korea Contents Association
• /
• v.5 no.2
• /
• pp.137-145
• /
• 2005

This study is a model of research for the developing 3D character contents about facial expression as a sort of non-linguistic signs, focusing on an expression of emotion factors of a person. It contributes a framework for symbolic analysis about Human's emotions along with a general review of expression. The human face is the most complex and versatile of all species. For humans, the face is a ich and versatile instrument serving many different functions. It serves as a window to display one's own motivational state. This makes one's behavior more predictable and understandable to others and improves communication. The face can be used to supplement verbal communication. A prompt facial display can reveal the speaker's attitude about the information being conveyed. Alternatively, the face can be used to complement verbal communication, such as lifting of eyebrows to lend additional emphasis to stressed word. The facial expression plays a important role under the digital visual context. This study will present a frame of facial expression categories for effective manufacture of cartoon and animation that appeal to the visual emotion of the human.

• Clean Technology
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2004

Manufacturing with a chemical for eco-friendly leather for nitrogen decrease of leather falling hair process waste water and the falling hair process that a number to decrease with sulfuration water decrease, a pollution load of COD, BOD. In this study manufactured lining agent and the unhairing assist product which did urea, mercaptan by basic matter. As a result of having dealt in hair saving process, compared, and was recalled by the existing hair burning process recovered hair, increased approximately 2times. Grain state to influence the yield that was quality of leather and an index of productivity evaluation, an improvement of contraction phenomenon (drawing) were possible. Is increased going seal, tear strength property of matter and softness and touch leather native nature in wet blue. Also, it is possible confirmation with decrease being more possible than about 50% COD, T-N density in a hair saving waste water.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.439-444
• /
• 2020

The purpose of this study is to seek an alternative method to prevent the contamination of normal saline caused by the back-flow of Gadolinium Based Contrast Agent(GBCA) by the use of auto-injector for dynamic MRI. The research method is to manufacture the non-return valve as an alternative to the existing, and to examine the usefulness of the normal saline by dividing the state of normal saline into three groups. The signal intensity were compared. As a result, there was no statistically significant difference between normal saline before injection of group 1 and group 3 non-return valve (p> 0.05). It is analyzed that the self-produced non-return valve completely blocked the GBCA back to normal saline when the GBCA was injected. In conclusion, the application of the non-return valve presented in this study for dynamic MRI imaging using the auto injector can prevent normal saline contamination due to GBCA back-flow.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.461-461
• /
• 2013

Over the last decade, zinc oxide (ZnO) thin films have attracted considerable attention owing to large band gap of 3.37 eV and large exciton binding energy of 60 meV at room temperature [1-3]. Recent interest in ZnO related researches has been switched into the fabrication and characterization of low-dimensional nanostructures, such as nano-wires and nano-dots that can be applicable to manufacture the optoelectronic devices such as ultraviolet lasers, light-emitting-diodes and detectors. Since the optical properties of ZnO nano-structures might be distinct from those of bulk materials or thin films, the low-dimensional phenomena should be examined further. In order to utilize such advanced optoelectronic devices, one of the challenges is how to control the surface state related emissions that are drastically increased with increasing the density of the nano-structures and the surface-to-volume ratio. This paper reports the synthesis and characterization of self-assembled ZnO hexagonal nano-disks grown by radio-frequency magnetron sputtering. X-ray diffraction data and scanning electron microscopy data showed that ZnO hexagonal nano-disks were nucleated on top of the flat surfaces as the film thickness reached to 1.56 ${\mu}m$ and then the number of nano-disks increased with increasing the film thickness. The lateral size of hexagonal nano-disks was ~720 nm and height was ~74 nm. The strong photo luminescence spectra obtained at 10 K was also observed, which was assigned to a surface exciton emission at 3.3628 eV arising from the surface sites of hexagonal nano-disks.