• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2007년도 추계학술발표회
• /
• pp.107-108
• /
• 2007

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.91-103
• /
• 2004

지반-유체-구조물 시스템에 대한 1g 진동대 실험을 위한 상사법칙의 유효성을 검증하기 위하여 일련의 모형실험을 수행하였다. 크기가 서로 다른 3가지의 모형에 대한 실험결과 분석에는 lai가 제안한 상사법칙뿐만 아니라 과잉간극수압 발생을 위한 정상상태개념도 적용하여 각 크기의 모형이 예측하는 안벽시스템의 거동을 서로 비교하였다. 그 결과, 가속도와 과잉간극수압, 그리고 변위 응답의 경우, 가장 작은 모형벽체와 가장 큰 모형벽체는 비슷한 값을 예측한 반면, 중간크기의 모형벽체는 공진현상으로 인해 엉뚱하게 큰 값을 예측하였다. 또한 벽체의 수직침하와 회전각은 모형의 크기와 관계없이 모형벽체시스템의 크기가 증가할수록 증가하는 경향을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2821-2835
• /
• 2020

The phenomenon identification and ranking table (PIRT) is an important basis in the nuclear power plant (NPP) thermal-hydraulic analysis. This study focuses on the importance ranking of the input parameters when lacking the PIRT, and the target scenario is the small break loss of coolant accident (SBLOCA) in a pressurized water reactor (PWR) CPR1000. A total of 54 input parameters which might have influence on the figure of merit (FOM) were identified, and the sensitivity measure of each input on the FOM was calculated through an optimized moment-independent global sensitivity analysis method. The importance ranking orders of the parameters were transformed into the Savage scores, and the parameters were categorized based on the Savage scores. A parameter importance ranking table for the SBLOCA scenario of the CPR1000 reactor was obtained, and the influences of some important parameters at different break sizes and different accident stages were analyzed.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.675-684
• /
• 2017

In this paper, a hybrid seismic response control (HSRC) system was developed to control bridge behavior caused by the seismic load. It was aimed at optimum vibration control, composed of a rubber bearing of passive type and MR-damper of semi-active type. Its mathematical modeling was driven and applied to a bridge model so as to prove its validity. The bridge model was built for the experiment, a two-span bridge of 8.3 meters in length with the HSRC system put up on it. Then, inflicting the EI Centro seismic load on it, shaking table tests were carried out to confirm the system's validity. The experiments were conducted under the basic structure state (without an MR-damper applied) first, and then under the state with an MR-damper applied. It was also done under the basic structure state with a reinforced rubber bearing applied, then the passive on/off state of the HSRC system, and finally the semi-active state where the control algorithm was applied to the system. From the experiments, it was observed that pounding rather increased when the MR-damper alone was applied, and also that the application of the HSRC system effectively prevented it from occurring. That is, the experiments showed that the system successfully mitigated structural behavior by 70% against the basic structure state, and, further, when control algorithm is applied for the operation of the MR-damper, relative displacement was found to be effectively mitigated by 80%. As a result, the HSRC system was proven to be effective in mitigating responses of the two-span bridge under seismic load.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.261-261
• /
• 2000

This paper analyzes the characteristics of pre-sliding friction of an X-Y table of CNC machining center at velocity reversal, and presents a simple and effective method of friction compensation based on this characteristics. At velocity reversal, a large position tracking error occurs because of the discontinuous change of friction. The relationship between the occurrence time of maximum position tracking error and the acceleration at zero velocity is analyzed by using the spring-like friction model. Furthermore, the experimental observation verifies this relation. From this, the state transition tine from pre-sliding regime into sliding regime can be predicted. Using the predicted transition time, the friction can be effectively compensated and table experimental results show its effectiveness.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2001년도 학술발표대회논문집
• /
• pp.77-82
• /
• 2001

This paper is contents that measure the ventilation rates and temperature by driving condition of exhaust fan, vapor, contaminant occurrence amount of carbon dioxide etc. In kitchen of apartment house. The ventilation rates in the apartment kitchen measured by Tracer Gas Method. And, temperature of when cook by gas table hood lower part 10cm and floor upside 10cm of kitchen central part, 120cm, 210cm heights measure. As ventilation rates measurement result, ventilation number of times was 0.7(number of times/hour) when did not to operate exhaust fan. but we were measured by 2.3(number of times/hour) when drove strongly. As temperature measurement result at cooking by gas table, temperature showed highest in hood lower part 10cm of case that do not operate exhaust fan. Temperature at kitchen central was most low in 10cm height in talc floor, and 210cm were measured highest. Concentration of carbon dioxide is very high by 4,350ppm after measurement time 10 minutes in state who do not operate exhaust fan at cooking by gas table.

• 한국식품조리과학회지
• /
• 제6권2호
• /
• pp.105-119
• /
• 1990

A study on the dietary habit and the food perference of Pre-school Children was made in order to identify the state of their dietary life and provide the data of dietetic education which can help the children to live a desirable food life, by analysing the present dietry life into the dietry habits, food preference, the actual condition of nutrition intake and table manners. 1. The Diet Habits. Both boys and girls were fond of dinner best and tended to neglect breakfast and lunch. 64.2% of the total children took meals regularly. 2. Food Preference. The most favorite food was beef, ham, Dupoo (beancurd), squid, ice-cream, bananas, watermelon, sweet potatoes, corn, Ingeolmi (cake form glutinous rice), doughnuts, JJajangmyon (Chinese noodles), Coke, fried chicken. 3. The Actual Conditions of Nutrition Intake. The frequency of intake of meat and its processed food was the lowest and that of fishes, shellfishes, fats and vegetables was low, too. 4. Table manners and Sanitary Conditions. The average mark of table manners and sanitary conditions is 12.49${\pm}$2.65. The children didn't practice well in the following points; talking at table, beginning to eat after the beginning of elder person's, brushing their teeth after taking meals, keeping a straight posture.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.187-201
• /
• 2004

A shaking table test on a three-story one-bay steel frame model with metallic yield dampers and their parallel connection with oil dampers is carried out to study the dynamic characteristics and seismic performance of the energy dissipation system. It is found from the test that the combined energy dissipation system has favorable reducing vibration effects on structural displacement, and the structural peak acceleration can not evidently be reduced under small intensity seismic excitations, but in most cases the vibration reduction effect is very good under large intensity seismic excitations. Test results also show that stiffness of the energy dissipation devices should match their damping. Dynamic analysis method and mechanics models of these two dampers are proposed. In the analysis method, the force-displacement relationship of the metallic yield damper is represented by an elastic perfectly plastic model, and the behavior of the oil damper is simulated by a velocity and displacement relative model in which the contributions of the oil damper to the damping force and stiffness of the system are considered. Validity of the analytical model and the method is verified through comparison between the results of the shaking table test and numerical analysis.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.29-38
• /
• 1998

This ppaer suggests a congestion control scheme for CL(ConnectionLess) overlay network using the feedback loops getween CL werver, between CL servers, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadband Data Service) defined by ITU0T(International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In this CL overlay network, two kinds of congestions, link congestion and CL server congestion, may occur. We suggest a scheme that can solve the congestion using ABR(Available Bit Rate) feedback control loop, the traffic control mechanism. This scheme is the link-by-link method suing the ABR feedback control loops between CL user and CL server or between CL servers, and the header translation table of CL server. As CL servers are always endpoints of ABR connections, the congestion staturs of the CL server can be informed to the traffic sources using RM(Resource Management) cell of the ABR feedback loops. Also CL server knows the trafffic sources making congestion by inspecting the source address field of CLNAP-PDUs(ConnectionLess Network Access Protocol - Protocol Data Units). Therefore this scheme can be implemeted easily using only both ABR feedback control loop of ATM layer and the congestion state table using the header translation table of CL server because it does not require separate feedback links for congestion control of CL servers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.504-504
• /
• 2000

The flow ratio in the industrial process is usually accomplished by using PID controller with series type ratio. But always the large overshoot and a long rise time may be achieved from this conventional control. These problems are involved to the inexact flow ratio control. In order to avoid this poor performance. the paper presents a designing of the two controller modes for the flow ratio plants. This proposed controller combine the lookup table technique and the well-known PID controller to obtain the fast response and low overshoot of flow ratio control. The PID controller mode will be operated when the flow ratio reaches the preset value while the lookup table technique mode is applied for initial operation. The data in tile table is calculated by the valve sizing equation and convened to the valve position control signal. The experimental results show that the transient and steady state responses of the control systems using the proposed technique can be efficiently obtained when compared with tile conventional controller.