• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.702-712
• /
• 2016

A wrist watch type wearable cardiovascular monitoring device is proposed for continuous and convenient monitoring of the patient's cardiovascular system. For comprehensive monitoring of the patient's cardiovascular system, the concurrent electrocardiogram (ECG) and arterial pulse wave (APW) sensor front-end are fabricated in $0.18{\mu}m$ CMOS technology. The ECG sensor frontend achieves 84.6-dB CMRR and $2.3-{\mu}Vrms$-input referred noise with $30-{\mu}W$ power consumption. The APW sensor front-end achieves $3.2-V/{\Omega}$ sensitivity with accurate bio-impedance measurement lesser than 1% error, consuming only $984-{\mu}W$. The ECG and APW sensor front-end is combined with power management unit, micro controller unit (MCU), display and Bluetooth transceiver so that concurrently measured ECG and APW can be transmitted into smartphone, showing patient's cardiovascular state in real time. In order to verify operation of the cardiovascular monitoring system, cardiovascular indicator is extracted from the healthy volunteer. As a result, 5.74 m/second-pulse wave velocity (PWV), 79.1 beats/minute-heart rate (HR) and positive slope of b-d peak-accelerated arterial pulse wave (AAPW) are achieved, showing the volunteer's healthy cardiovascular state.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2006

In advanced countries, state-of-the-art temperature monitoring technique is widely used for effective use of geothermal resources. But these kind of modern tools such as Thermal Line Sensor has not been applied to find geothermal characteristics of alluvium and riverbed in domestic area. In this research, state-of-the-art thermal line temperature sensor monitoring was introduced. And long term field test using this type of sensor was performed to find geothermal characteristics of alluvium and riverbed and evaluate the availability for heat energy source. As a result, temperature monitoring technique through thermal line sensor was very effective to obtain basic geothermal information of alluvium deposit and riverbed. Also, it was found that the groundwater temperature phase showed its potential of utilization as a energy source of heat pump. It is estimated that further study shows a specific corelation between temperature monitoring data and its availability as a energy source.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.619-625
• /
• 2016

본 논문에서는 풍력 발전 시스템에서 발생 가능한 고장 중 블레이드에 대한 고장 진단 방법으로 자이로 센서를 이용한 각속도 측정을 통해 고장 진단용 모니터링 시스템을 제안한다. 제안하는 방법은 우선 손상이 발생하지 않은 상태의 블레이드 회전에 대한 각속도 dataset을 구성한다. 블레이드 상태 판별을 위한 dataset 구성이 되었다면, 임의의 상태에 대한 블레이드가 부착된 풍력 발전기를 일정한 힘을 가해 회전시킨 후 최종적으로 블레이드의 손상 정도에 따라 발생하는 각속도의 차이를 비교하여 블레이드의 고장 진단에 대해 판단한다. 실험 결과 정상 상태의 블레이드는 초당 1회 (초당 $360^{\circ}$) 이상의 속도로 회전을 진행하며, 손상 상태의 블레이드는 초당 1회 미만의 속도로 회전하며 표준 편차가 급격히 증가하는 것을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3888-3910
• /
• 2018

As an increasing number of defense methods against control-data attacks are deployed in practice, control-data attacks have become challenging, and non-control-data attacks are on the rise. However, defense methods against non-control-data attacks are still deficient even though these attacks can produce damage as significant as that of control-data attacks. We present a method to defend against non-control-data attacks using influence domain monitoring (IDM). A definition of the data influence domain is first proposed to describe the characteristics of a variable during its life cycle. IDM extracts security-critical non-control data from the target program and then instruments the target for monitoring these variables' influence domains to ensure that corrupted variables will not be used as the attackers intend. Therefore, attackers may be able to modify the value of one security-critical variable by exploiting certain memory corruption vulnerabilities, but they will be prevented from using the variable for nefarious purposes. We evaluate a prototype implementation of IDM and use the experimental results to show that this method can defend against most known non-control-data attacks while imposing a moderate amount of performance overhead.

• Structural Monitoring and Maintenance
• /
• 제6권2호
• /
• pp.125-145
• /
• 2019

Bridge scour is one of the predominant causes of bridge failure. Current climate deterioration leads to increase of flooding frequency and severity and thus poses a higher risk of bridge scour failure than before. Recent studies have explored extensively the vibration-based scour monitoring technique by analyzing the structural modal properties before and after damage. However, the state-of-art of this area lacks a systematic approach with sufficient robustness and credibility for practical decision making. This paper attempts to develop a data-driven methodology for bridge scour monitoring using support vector machines. This study extracts features from the bridge dynamic responses based on a generic sensitivity study on the bridge's modal properties and selects the features that are significantly contributive to bridge scour detection. Results indicate that the proposed data-driven method can quantify the bridge scour damage with satisfactory accuracy for most cases. This paper provides an alternative methodology for bridge scour evaluation using the machine learning method. It has the potential to be practically applied for bridge safety assessment in case that scour happens.

• 소프트웨어공학소사이어티 논문지
• /
• 제28권2호
• /
• pp.1-6
• /
• 2019

블록체인 생태계에는 다양한 이해관계자들이 존재한다. 이더리움이 등장한 이후 스마트 컨트랙트를 활용한 거래가 많이 이루어지게 되었고 개발자뿐만 아니라 투자자, 은행, 기업, 일반 사용자 등등 더욱 폭넓은 이해관계자들이 참여하고 활동하고 있다. 하지만 다양한 이해관계자가 스마트 컨트랙트의 상태를 확인하기 위해서는 어렵고 복잡한 과정을 거쳐야 한다는 문제점을 가지고 있다. 상태 확인이 어렵게 된다면 스마트 컨트랙트에 대한 신뢰도가 낮아지게 되어 활용도가 낮아질 것이다. 개발자에게 있어서도 상태 확인이 어렵고 복잡하다면 자신이 개발한 스마트 컨트랙트의 테스팅과 디버깅을 하는데 어려움을 겪어 높은 품질을 제공하기 힘들 것이다. 본 연구에서는 다양한 이해관계자와 개발자들이 스마트 컨트랙트의 상태를 쉽고 지속적으로 확인할 수 있으며 히스토리 데이터를 활용하여 분석할 수 있도록하는 이더리움 스마트 컨트랙트 상태 모니터링 시스템의 설계 및 구현 방법을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.186-189
• /
• 1997

To monitor abnormal state of rotary compressor, methods for acquisition and processing of Acoustic Emission(AE) signal are arranged and optimal AE parameter for monitoring is determined. The detecting method of abnormal compressor in real time is suggested and special-purpose minitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor in low cost.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.65-68
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, High accuracy and wide frequency bandwidth of sensors are important. This paper describes the factors which has an effect on performances of inductive position sensor. We also report the experimental results that characterize the performances of the inductive position sensor.

• 융합보안논문지
• /
• 제4권3호
• /
• pp.1-8
• /
• 2004

Computational Grid나 Data Grid와 같은 대규모 분산 시스템은 장애 탐지, 성능 측정, 성능튜닝, 성능 예측, 스케줄링, 보안 분석 등의 작업을 위해 많은 량의 모니터링 데이터를 필요로 한다. 네트워크 특성을 나타내는 지표들은 네트워크 모니터링 시스템을 통해 얻어질 수 있으며 시스템에 의해 축적된 자료는 상기한 작업의 정확한 분석을 돕는다. 본 논문에서는 네트워크 모니터링 시스템의 한 형태로 네트워크 모니터링기반의 네트워크 성능 및 보안 분석 시스템을 소개한다. 본 시스템은 이용자 중심으로 네트워크 성능 및 보안 데이터를 제공하며, 이용자가 원격지의 네트워크 특성을 측정 환경에 따라 변화해 가며 측정할 수 있게 함으로써 해당 원격지의 네트워크 서비스를 가늠해 볼 수 있게 한다.

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.305-318
• /
• 2008

The development of a digital signal processor based prototype is described in relation to continuing efforts for realizing a fully self-contained active sensor system utilizing impedance-based structural health monitoring. The impedance method utilizes a piezoelectric material bonded to the structure under observation to act as both an actuator and sensor. By monitoring the electrical impedance of the piezoelectric material, insights into the health of the structured can be inferred. The active sensing system detailed in this paper interrogates a structure utilizing a self-sensing actuator and a low cost impedance method. Here, all the data processing, storage, and analysis is performed at the sensor location. A wireless transmitter is used to communicate the current status of the structure. With this new low cost, field deployable impedance analyzer, reliance on traditional expensive, bulky, and power consuming impedance analyzers is no longer necessary. A complete power analysis of the prototype is performed to determine the validity of power harvesting being utilized for self-containment of the hardware. Experimental validation of the prototype on a representative structure is also performed and compared to traditional methods of damage detection.