• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1304-1312
• /
• 1993

본 연구는 열 발생 장치 형상이 다양화 되고 이들 장비들이 설치위치에 따라 수직 이나 수평 또는 경사진 경우를 고려하여 수직으로 부터 경사각도를 증가 시키면 서 부력의 영향에 따른 혼합대류 유동의 온도분포, 속도분포와 국소 Nusselt수, 국소 마찰계수, 열유속및 열전달계수 등의 값을 수치해석적으로 구하여, 쉴리렌 간섭계를 사용하여 실험적으로 구한 열유속, 열전달계수 값과 비교하여 비가열부의 영향을 검토하고자 한다.

• 한국결정성장학회지
• /
• 제11권1호
• /
• pp.33-37
• /
• 2001

$213^{\circ}C$에서 깁사이트와 pseudoboehmite를 출발물질로 하여 산성도를 변화시켜 수열합성법에 의해서 카올리나이트를 합성하였다. 합성된 카올리나이트는 X-선회절 분석기와 적외선 분광광도계를 이용하여 결정화 과정을 조사하였으며 Hinckley 지수를 계산하였다. 산을 이용한 카올리나이트 합성은 출발물질의 용해를 촉진시켜 결정화하였다. 결정화 속도와 적층결함은 음이온의 종류, 산성도와 출발물질에 의존하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.288-289
• /
• 1992

The method of simulated annealing is a technique that has recently attracted significant attention as suitable for optimization problem of very large scale. If the temperature is too high, then some of the structure created by the heuristic will be destroyed and unnecessary extra work will be done. If it is too low then solution is lost, similar to the case of a quenching cooling schedule in the Simulated Annealing (SA) phase. Therefore, a crucial issue in this study is the determination of the starting temperature and cooling schedule for SA phase.

• Journal of Yeungnam Medical Science
• /
• 제9권1호
• /
• pp.110-120
• /
• 1992

경뇨도 전립선 절제술을 시행한 환자 30명을 대상으로 하여 furosemide부여에 따른 혈중 나트륨치와 삼투질 농도를 비교 관찰한 결과 다음과 같은 결론을 얻었다. 1. 혈중 나트륨치는 대조군에서 술전에 비해 10분, 20분, 30분, 수술직후에 의의있는 감소(p<0.05)가 있었으나 실험군에서는 변화가 없었다. 2. 혈장 삼투질농도와 유효 삼투질농도는 대조군에서 술전치와 비교시 술중 30분과 수술직후에 의의있는 감소(p<0.05)가 있었으나 실험군에서는 잘 유지가 되었다. 이상의 결과로 보아 술중 흡수된 관류액의 영향을 줄일 목적으로 furosemide를 투여한 실험군에서 대조군에 비해 혈중나트륨치와 삼투질농도를 잘 유지시키기에 그 예방적 투여가 의의있다고 사료되며 특히 울혈성 심부전이나 신부전이 있는 환자의 수술시 furosemide를 투여하면 그 의의가 더 클 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.408-412
• /
• 2010

The single-phase switched reluctance motor(SRM) generates the positive torque in the restricted section. So, it can not started by itself and the torque ripple is heavier than poly-phase. For self-starting and fixing rotating direction, the rotor should be placed at the rising inductance slope when stationary. The parking permanent magnet locates the rotor in the fixed position, which can be started by it-self. It is very simple and cost effective but has some drawbacks. It affects the rotor during the operation, so the characteristics of motor, such as a torque, speed, and ripple are changed to go bad. This paper presents the detent torque of parking magnet starting device through the finite element analysis and experiments. The finite element analysis is performed at incremental rotor positions over one detent torque cycle for any one pole. The prototype, fabricated in the previous research, is used for the experiments. The inductance, instant torque, and detent torque are calculated using the terminal voltage and phase current. Finally, the finite element analysis result and the experiment result are compared for analysis and validity.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.217-223
• /
• 2004

Submicron nickel powders were prepared from aqueous solution under hydrothermal condition. The experimental conditions including the types of protective agents, concentration of the solution and the pH were studied in detail. Starting concentration of nickel ion is a dominant factor affecting particle size. It was shown that the subsequent addition of Poly Vinyl Pyrrolidone(PVP) and Sodium Dodecyle Sulfate(SDS) can help to disperse the nickel powder. X-ray diffraction and SEM were employed to characterize the products.

• 산업경영시스템학회지
• /
• 제27권4호
• /
• pp.42-48
• /
• 2004

This paper concerns on a multiprocessor task scheduling problem with precedence relation, in which each task requires several processors simultaneously. Meta-heuristic generally finds a good solution if it starts from a good solution. In this paper, a tabu search is presented to find a schedule of minimal time to complete all tasks. A modified tabu search is also presented which uses a new initial solution based on the best solution during the previous run as the new starting solution for the next iteration. Numerical results show that a tabu search and a modified tabu search yield a better performance than the previous studies.

• Journal of applied mathematics & informatics
• /
• 제8권1호
• /
• pp.181-197
• /
• 2001

A heuristic method TABU-CSP using Tabu Search (TS) is described for solving Constraint Satisfaction Problems (CSPs). The method is started with a complete but inconsistent solution of a binary CSP and obtained in prespecified number of iterations either a consistent solution or a near optimal solution with an acceptable number of conflicts. The repair in the solution at each iterative step is done by using two heuristics alternatively. The first heuristic is a min-conflicts heuristic that chooses a variable with the maximum number of conflicts and reassigns it the value which leads to the minimum number of conflicts. If the acceptable solution is not reached after the search continued for a certain number of iterations, the min-conflict heuristic is changed and the variable selected least number of times is chosen for repair. If an acceptable solution is not reached, the method switches back to the min-conflict heuristic and proceeds further. This allowed the method to explore a different region of search space space for the solution as well as to prevent cycling. The demonstration of the method is shown on a toy problem [9]which has no solution. The method is then tested on various randomly generated CSPs with different starting solutions. The performance of the proposed method in terms of the average number of consistency is checked and the average number of conflicts is conflicts is compared with that of the Branch and Bound(BB) method used to obtain the same solution. In almost all cases, the proposed method moves faster to the acceptable solution than BB.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.68-68
• /
• 1998

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.175-181
• /
• 2005

The spherical particles of $CeO_2/SiO_2$ composite powder with narrow-size distribution and pure phase particles were synthesized by ultrasonic spray pyrolysis method from aqueous cerium sulfate solution. The resulting composite powder was characterized by X-ray diffraction, scanning electron microscopy, transmittance electron microscopy, in-vitro sun protect factor, and BET surface area analysis. The concentration of cerium sulfate was tested to vary the particle size from $3.40{\times}10^{-3}$ to $1.02{\times}10^{-2}mol/cm^3$ to study concentration effect of starting material. The average particle size from the $3.40{\times}10^{-3}mol/cm^3$ concentration was found to be slightly smaller than that from the $1.02{\times}10^{-2}mol/cm^3$ concentration, because of the relation between the droplet size and the concentration of the starting material solution.