• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.392-398
• /
• 1983

A pilot single-screw food extruder was constructed, and its mechanical properties and product characteristics were investigated by using corn grits. The screw rotational speed was varied and the changes in temperature profile of the barrel for the start-up period of operation were measured. The rate of heat generation for the start-up period was affected by the screw speed and feed rate. The screw speed resulted in a great influence on the estimated dough viscosity. The changes in the dough viscosity could indicate the on-set of termoplastic reaction in the barrel. The expansion ratio during the start-up period mainly depended on the barrel temperature and the degree of thermoplastic reaction in the barrel. The barrel temperatures for the gelatinization and burning of corn grits depended on the screw speed as well as the feed rate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1410-1417
• /
• 1999

A thorough understanding of the transient behavior during start-up is essential in the design and operation of the heat recovery steam generator(HRSG). During this period of time, material that is exposed to high temperature and experiences a large temperature variation is subject to high thermal stress. In this work, a transient formulation of the HRSG is constructed including the estimation of the thermal stress and fatigue of the drum wall. Start-up behavior of a single-pressure HRSG is analyzed and the effect of bypassing part of the gas turbine exhaust flow on the thermal stress evolution is examined. It is found that the modulation of the gas flow rate using a bypass damper is very useful in view of reducing the thermal stress of the drum and ensuring the fatigue lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1544-1551
• /
• 2007

A start-up circuit of the bandgap reference voltage generator of cascode current mirror type with wide operating voltage range and enhanced power-up characteristics is proposed in the paper. It is confirmed by simulation that the newly proposed start-up circuit does not affect the operation of the bandgap reference voltage generatory even though the supply voltage(VDDA) is higher and has more stable power-up characteristic than the conventional start-up circuit. Test chips are designed and fabricated with $0.18{\mu}m$ tripple well CMOS process and their test has been completed. The mean value of measured the reference voltage(Vref) is 738mV and The three sigma value($3{\sigma}$) is 29.88mV.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.159-172
• /
• 2023

The purpose of this study is to explore a collaborative start-up space(Co-Space) configuration plan in terms of university-regional linkage through demand analysis on the composition of university-regional linkage startup space. To this end, a survey was conducted for request analysis, and the collected data were analyzed through the t-test, The Lotus for Focus model. In addition, FGI was implemented for entrepreneurs, and the direction of the composition of the university-region Co-Space was derived from various aspects. The results of this study are as follows. First, as a result of the analysis of the necessity of university-community Co-Space, the necessity of opening up the start-up space recognized by local residents and the necessity of building the start-up space in the region were high. In addition, men recognized the need to build a space for start-ups in the community more highly than women did women. Second, as a result of analysis of demands for university-regional Co-Space, the difference between current importance and future necessity of university-regional Co-Space was statistically significant. Third, as a result of analysis on the composition of the startup space by cooperation between universities and regions, different demands were made for composition of the startup space considering openness and closeness, and for composition of the startup space size. The implications of the study are as follows. First, Co-Spaces need to be constructed in conjunction with universities in accordance with the demands of start-up companies in the region by stage of development. Second, it is necessary to organize a customized Co-Space that takes into account the size and operation of the start-up space. Third, it is necessary to establish an experience-based open space for local residents in the remaining space of the university. Fourth, it is necessary to establish a Co-Space that enables an organic network between local communities, start-up investment companies, start-up support institutions, and start-up companies. This study is significant in that it proposed the regional startup ecosystem and the cooperative start-up space structure for strengthening start-up sustainability through cooperation between universities and local communities. The results of this study are expected to be used as useful basic data for Co-Space construction to build a regional start-up ecosystem in a trend emphasizing the importance of start-up space, which is a major factor affecting start-up companies.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.57-66
• /
• 2016

The study aims to examine the impact of Start-Up Business Incubator System on Performance of the Start-up Graduated from the Business Incubator. This has analyzed 813 startups which had supported by Seoul Metropolitan City in particular from 2009 to 2010. Empirical analysis has choosed business room for free, startup grant for operation, education & coaching support, consulting support by practitioner, promotion & new market opening support and collaboration support among startups in the business incubator as independent variables and also implemented startup success satisfaction degree as a depentent variable. The results shows that the degree of satisfaction on start-up activity support fund for entrepreneur and the degree of satisfaction on collaboration support among firms in the business incubator have statistical significant impact on start-up success satisfaction degree. The study has an implication that it provides a basic data on policy support strategies by central and local autonomous governments that facilitate entrepreneurs to achieve start-up business goals by understanding the factors that affect the business performance of entrepreneurs. In addition, the study offers new directions for entrepreneurs in a way that promotes the start-up performance by business room for free, education & coaching support, consulting support by practitioner, promotion & new market opening support which were investigated as statistical insignificant constructs, so that the author expects new studies about more effective business incubator system to enhance the performanc of start-up in business incubator.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.587-594
• /
• 2012

When a PWM rectifier has a low DC-link voltage during startup, the output voltage vector cannot be high enough to regulate the input current. This lack of a PWM rectifier output voltage vector can cause an unregulated inrush current when the rectifier operation starts. This paper presents a PWM rectifier start-up current control algorithm for when it starts operation with a lower DC-link voltage than unloaded condition case. To avoid the unregulated inrush current caused by a lack of DC-link voltage, the proposed control scheme regulates the one phase current with one switch chopping and it generates the current command considering the uncontrolled current magnitude information, which is calculated in advance. Simulation and experiment results support the validity of the proposed method.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.179-183
• /
• 1999

Rubbing occurs when a rotating element comes in contact with a stationary element. In the steam turbines, the rotating element is the rotor while the stationary elements are usually the oil deflectors and packing seals. Rubbing phenomenon may be often obseued on a new or rebuilt machine rather than on a machine that has been operating for several months or years. Rubbing in the turbine has been classified into two modes by the operating conditions: 1) start up or shut down, 2) steady state. At start up or shut down operation, rubbing produces synchronous whirl vibration, which are caused by thermal bow of the shaft due to localized heating on the shaft surface. While subsynchronous whirl vibration is caused by partial rubbing during the steady state operation. In this paper, the two case studies of troubleshooting for excessive vibration caused by rubbing in the actual steam turbines are investigated.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.163-171
• /
• 2021

The purpose of this study is to examine the current operation condition of fashion start-up companies and the characteristics of their founders in Fashion Creative Studio that is one of government programs supporting fashion start-up of rising fashion designer's brands in Korea and one of supporting facilities. For this purpose, this study surveyed 32 fashion start-up companies founders in Busan Fashion Creative Studio and analyzed the data based on the survey. The results are as follows. First of all, 82% of the founders have experience to start their business in 20s and 60% of founders with not more than 3 to 5 years of work experience related to fashion challenge to start a business. Secondly, major distribution channels of the fashion start-up companies are mainly on-line open-market consisting of 36% and SNS is up to 80% as the main promotion method. In addition, exports to China account for 71% of all exports. Lastly, 33% of businesses consider viral marketing by influencer and 50% of them make plan to export their items to East Asia. It is of research significance that this study can suggest the successful direction of establishing and operating fashion start-up companies through making good use of Fashion Creative Studio, the supporting program including facility.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.41-45
• /
• 2008

This paper describes a simple and straightforward method to determine phase converter reactances for the monocyclic start induction motor which have two different phase converters. In order to determine two reactances, two kinds of simultaneous equations with two unknown reactances at a specified speed are set up by the condition of balance operation. From these equation, these unknown reactances can be solved directly using the application software without any algebraic calculation. The applicability of this method is investigated by comparing with the known method by using the computed results at the starting and rated speed, and the results show good agreement each other. Using these results, the performance characteristics of this motor are computed and compared with three phase balance operation of induction motor.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1720-1728
• /
• 2018

This paper proposes a novel soft starting algorithm by using PWM inverter technique to control an amplitude of the motor starting current at a single-phase induction motor (SPIM). Traditional SPIM starting methods such as a Split-Phase, Capacitor-Start, Permanent-Split Capacitor (PSC), Capacitor-Start Capacitor-Run (CSCR), basically cannot control the magnitude of starting current due to the fixed system structures. Therefore, in this paper, a soft starting algorithm based on a proportional resonant (PR) control with a variable and constant frequency is proposed to reduce the inrush current and starting up time. In addition, a transition algorithm for operation modes is devised to generate a constant voltage and constant frequency (CVCF). The validity and effectiveness of the proposed soft starting method and transition algorithm are verified through experimental results.