• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.11-20
• /
• 2015

In the present work, a basic study on the in-situ biogenic methane generation from low grade coal bed was conducted. Lignite from Indonesia was used as a sample feedstock. A series of BMP (Biochemical Methane Potential) tests were carried out under the different experimental conditions. Although nutrients and anaerobic digester sludge were added to the coal, the produced amount of methane was limited. Both temperature control and particle size reduction showed little effect on the increase of methane potential. When rice straw was added to lignite as an external carbon source, methane yield of 94.4~110.4 mL/g VS was obtained after 60 days of BMP test. The calorific value of lignite after BMP test decreased (4.5~12.1 %) as increasing the content of rice straw (12.5~50 wt % of lignite), implying that anaerobic digestion of rice straw led to partial degradation of lignite. Therefore, rice straw could be used as an external carbon source for the start-up of in-situ biogas generation from low grade coal bed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1285-1290
• /
• 2017

In this paper, we developed a core module of the steering system to control and operate the outboard ship with the automatic steering system, and implemented it as a complete integrated system. In particular, this paper presents the problem of the rudder sensor used in the existing system and implements the contactless rudder sensor as an improvement. In the case of existing rudder sensors, there is a problem that safety operation and economic loss of the ship operation is caused by malfunction due to immersion during use in outboard vessels. However, the proposed rudder sensor is separated from the rotary shaft to constitute a contactless type, and a circular magnet is fixed so that the rotating value can be detected and used by the Hall sensor to completely solve the flooding problem. As a result of the characteristic test, the voltage value from 1.8V to 3.2V was obtained between $-35^{\circ}$ and $+35^{\circ}$ degrees and satisfied the reference value. The proposed rudder sensor was mounted on the outboard ship, and all the performance of controller system were checked. According to the system proposed in this paper, it satisfies the Korean Standard Specification, which defines the speed of convergence in 30 seconds by switching from left to right in 7 seconds. We also confirmed that automatic steering was performed by comparing the compass sensor with the destination in the integrated controller at the start-up.

• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.98-107
• /
• 2000

This paper compares the performance of feedback consolidation algorithms with or without a fast overload indication function which has been recently proposed in the ATM Forum for multicast ABR (Available Bit Rate) services in ATM networks. We use the performance criteria such as the ACR (Allowed Cell Rate) of a source, queue length at a switch, link utilization, fairness, and BRM (Backward Resource Management) cell overhead. Simulation results show that performance of the feedback consolidation algorithms with a fast overload indication function can be improved sign.ificantly than that of algorithms without this function in terms of ramp-down delay, particularly in initial start-up period or under a severe overload situation. The fast overload indication function can be combined with any feedback consolidation algorithm, whereas its performance is highly dependent on an underlying basic feedback consolidation algorithm.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.123-131
• /
• 2007

Effect of nitrogen-load condition on hydrogen ($H_2$) production and bacterial community in a continuous anaerobic hydrogen fermentation were investigated. The slight $H_2$ production on extremely low nitrogen-load condition (C/N ratio: 180) at the start-up period. The highest $H_2$ production was obtained when the C/N ratio was 36, the $H_2$ production yield ($mol-H_2/mol-glucose$) reached to 1.7, and it was indicated that Clostridium pasteurianum mainly contributed to the $H_2$ production. The $H_2$ production was decreased on both the lower (C/N: 72) and higher (C/N: 18) nitrogen-load conditions. The excess nitrogen-load was not always suitable for the hydrogen production. The fluctuation of $H_2$ production seemed to be caused by a change in the bacterial community according to the nitrogen-load condition, while a recovery of $H_2$ productivity was possible by a control of nitrogen-load condition through the bacterial community change. When the nitrogen-load condition was not suitable for hydrogen production, the lactic acid concentration was increased and also lactic acid bacteria were definitely detected, which suggested that the competition between hydrogen fermentator and lactic acid producer was occurred. These results demonstrated that the nitrogen-load condition affect on the $H_2$ productivity through the change of bacterial community in anaerobic hydrogen fermentation.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.434-438
• /
• 2005

Nitrification characteristics and performance of wastewater treatment plants depend on not only temperature, pH, and dissolved oxygen of the wastewater but also species, distribution, and their metabolic stages of nitrifying bacteria. Due to their low specific growth rate, nitrifying bacteria are easy to wash out of the reactor and need long time to start-up and recover from damaged nitrifiers community. In order to overcome this limitation, nitrifying bacteria were coated on a polyurethane-based media. Laboratory and pilot-scale reactor had been designed and operated to compare the effect of coated nitrifying bacteria on wastewater nitrification efficiency and performance. Furthermore, the species and quantitative distribution of nitrifying bacteria were also investigated in the suspension and on the media. The results showed that nitrifier-coated reactor had better nitrification efficiency and performance than the control experiments. It also demonstrated that the amounts of total nitrifying bacteria of a coated reactor was higher than other reactors and it increased with operation time and wastewater temperature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3351-3369
• /
• 2017

In recent years, datacenters, network devices and computers have proliferated. The power consumed by information and communication technology (ICT) devices has inflated in an extraordinary manner. Green communication has emerged as a new approach to reduce and optimize power consumption in ICT sector. Many methods and protocols have been proposed and implemented to achieve green communication. Nevertheless, the increase of power consumption remains a problem. In this work, we attempt to reduce and optimize power consumption of network devices in datacenters environment utilizing software defined network (SDN) paradigm. To gain more insight of the power consumption requirements of network switches, a power measurement system is constructed to measure power consumption levels of network devices. Subsequently, we propose a duplication resolver algorithm (DRA) to power off/on switches reactively. DRA algorithm reduces the required time by switches to construct their flow tables after rebooting. To this end, DRA-based external circuit has been constructed utilizing Ethernet module and an Arduino kit to control power supplies of network devices. To facilitate our work, a testbed has been constructed utilizing Ryu SDN controller, HP2920-24G switches and Arduino kits. Our results show that DRA algorithm can reduce both the power usage and start-up time delay of network switches after failures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.239-247
• /
• 2016

Background: The overall cervical cancer incidence rate is low in Iran; however, because of a higher risk of death for cervical cancer, a disease that kills women in middle age, a cervical cancer control program is needed. The aim of this study was to provide consensus recommendation for cervical cancer prevention in Iran and other Muslim societies with low incidences of cervical cancer. Materials and Methods: Through a practical guideline development cycle, we developed six questions that were relevant to produce the recommendation. We reviewed 190 full text records of cervical cancer in Iran (1971 to 2013) of which 13 articles were related to the data needed to answer the recommendation questions. We also reviewed World Health Organization, IARC, GLOBOCAN report, Iran Ministry of Health cancer registry report and 8 available foreign countries guidelines. Lastly, we also evaluated the Pap smear results of 825 women who participated in the Iranian HPV survey, of whom 328 were followed-up after a 5-year interval. Results: The obtained data highlighted the burden of HPV and cervical cancer situation in Iran. Experts emphasized the necessity of a cervical cancer screening program for Iranian women, and recommended an organized screening program with a cytological evaluation (Pap smear) that would start at the age of 30 years, repeated every 5 years, and end at the age of 69 years. Meanwhile, there is no need for screening among women with a hysterectomy, and screening should be postponed to post-partum among pregnant women. Conclusions: An organized cervical cancer screening is a necessity for Iran as more than 500-900 women in middle age diagnosed with an invasive cervical cancer every year cannot be ignored. This recommendation should be taken into account by the National Health System of Iran and Muslim countries with shared culture and behavior patterns. CUBA HPV test could be consideration in countries Muslim country with appropriate budget, resources and facility.

• Journal of ILASS-Korea
• /
• v.25 no.1
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.33-41
• /
• 2018

This study was designed to provide basic data for developing exercise program that helps correcting posture by knowing the effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction. In this study determined subjects whether they had forward head posture or not. On the basis of the New York state posture rating, if a subject's posture is match up with the normal standard posture, gives 5 points and if the posture is slightly get out of the normal standard posture, gives 3 points and if the posture is apparently get out of the standard, gives 1 points. When determining the forward head posture, if talus, humerus and outer ear center are on the same line, it is determined as normal and if outer ear center is off the line less than 1.0cm, it is a slight deformation and if outer ear center is off the line more than 1.0cm, it is a high deformation. In the study selected people who have more than 1 cm gap between two vertical lines start from outer ear center and acromion separately as subjects. Length between the ideal alignment line measured by using goniometer and temporal region showed statistically significant decrease as $2.36{\pm}1.07cm$ before the intervention and $1.06{\pm}0.88cm$ after the intervention. After 4 weeks of neck and chest extensor muscle exercise, the group who exercised both showed increase in range of neck joint motion and neck flexion of the forward head posture. Meanwhile the group who only exercised neck extensor muscle only and the group who only exercised chest extensor muscle didn't showed statistically significant result. That only the group who exercised both muscles showed significant result is the different with studies before. Because this study didn't target patient who had a lesion, couldn't compare effect of the conservative manner and exercise. However, this study provides the fact that the group who exercised both neck and chest muscle had more effect than the control group.

• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.460-469
• /
• 2010

To develop coal gasfication system, many studies have been actively conducted to describe the simulation of steady state. Now, it is necessary to study the gasification system not only in steady state but also in dynamic state to elucidate abnormal condition such as start-up, shut-down, disturbance, and develop control logic. In this study, a model was proposed with process simulation in dynamic state being conducted using a chemical process simulation tool, where a heat and mass transfer model in the gasifier is incorporated, The proposed model was verified by comparison of the results of the simulation with those available from NETL (National Energy Technology Laboratory) report under steady state condition. The simulation results were that the coal gas efficiency was 80.7%, gas thermal efficiency was 95.4%, which indicated the error was under 1 %. Also, the compositions of syngas were similar to those of the NETL report. Controlled variables of the proposed model was verified by increasing oxygen flow rate to gasifier in order to validate the dynamic state of the system. As a result, trends of major process variables were resonable when oxygen flow rate increased by 5% from the steady state value. Coal flow rate to gasifier and quench gas flow rate were increased, and flow rate of liquid slag was also increased. The proposed model in this study is able to be used for the prediction of gasification of various coals and dynamic analysis of coal gasification.