• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.195-212
• /
• 2012

Most of the office-workers are worrying about their future and try to make diverse future plan. Fast shifting industry pattern make office-workers retire early and their remain life time are getting longer and many of them try to consider some kind of new start-up. In this article factors affecting entrepreneurial intention were discussed such as individual factors, psychological factors, environmental factors. Individual factors were economic situations and future life expectation were analyzed. Psychological factors were composed of risk taking tendency, self efficiency, career value, and entrepreneurial characteristics were discussed. Environmental factors were composed of recognition on social-economic risks and recognition on negative mind on start-up, and employment unstability. 340 sample questionaries were collected and 26 samples were excluded. Data were analyzed by SPSS Win 18.0 Version. The results of the study were as follows. Among individual factors life-expectation after retirement was positive impact on entrepreneurial intention. Among psychological factors risk taking factor has positive impact on entrepreneurial intention. Among Environmental factors negative recognition on start-up has negative impact on entrepreneurial intention. Based on the studies diverse understanding and implementation of policies were necessary to change negative social atmospheres on start-up.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.107-112
• /
• 2021

This study aims to analyze a cafe built by reflecting the characteristics of Jeju among the cafes in Jeju. This is to provide practical help to prospective prep entrepreneurs who want to start a cafe in Jeju. The cafe reflecting the characteristics of Jeju maintains its own competitiveness and constant interest of tourists by securing differentiation and uniqueness. In addition, by looking at the characteristics of Jeju applied to cafe architecture, the academic foundation for understanding the Jeju and applicable characteristics of Jeju were summarized. The study was conducted in parallel with literature analysis and on-site analysis, and as a result, the following contents were found. First, it is a reflection of Jeju's phenomenal materiality. Second, it is a reflection of Jeju's interpretive everyday life. Third, it is a reflection of Jeju's materiality time. In this regard, if prep entrepreneurs start a cafe that reflects the characteristics of Jeju, they can create a cafe with very specific characteristics if they integrate the three characteristics above.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1052-1061
• /
• 2005

A small-scale loop heat pipe (LHP) with polypropylene wick was fabricated and tested for investigation of its thermal performance. The container and tubing of the system were made of stainless steel and several working fluids were tested including methanol, ethanol, and acetone. The heating area was $35\;mm\;{\times}\;35\;mm$ and nine axial grooves were provided in the evaporator to provide vapor passages. The pore size of the polypropylene wick inside the evaporator was varied from $0.5\; {\mu}m\;to\;25\;{\mu}m.$ The inner diameter of liquid and vapor transport lines were 2.0 mm and 4.0 mm, respectively and the length of which were 0.5 m. The size of condenser was $40\;mm\;(W)\;{\times}\;50\;mm\;(L)$ in which ten coolant paths were provided. Start-up characteristics as well as steady-state performance was analyzed and discussed. The minimum thermal load of $10\;W\;(0.8\;W\;/cm^{2})$ and maximum thermal load of $80\;W\;(6.5\;W\;/cm^{2})$ were achieved using methanol as working fluid with the condenser temperature of $20^{\circ}C$ with horizontal position.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.44-52
• /
• 2014

Solid oxide fuel cell(SOFC) makes electric power using hydrogen or reformed from methane and emits high temperature products that contain flammable species like hydrogen, carbon monoxide and methane which varies with operation condition. SOFC/gas turbine integrated system which uses thermal and chemical energy of the discharges is more efficient than SOFC itself. Burning character of the SOFC products will affect the efficiency and stability of the system. Experiments were conducted to know the characteristics of the flame for two typical composition of SOFC products, i.e. start-up and steady state composition. When coflowing air temperature was higher than $600^{\circ}C$, auto-ignitin occurred for both fuels. Though start-up fuel has higher contents of hydrogen, it makes longer flame than steady state composition. It was inferred that the amount of oxidizer necessary to burn makes this phenomenon. Steady state composition fuel was unstable since it contains lots of water. Nozzle that had 6 holes, distance between each hole was 16.7 times of hole diameter, improved the stability of the flame.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.1
• /
• pp.7-18
• /
• 2012

So many researchers have been interested in key success factors of technological start-ups. However, even previous studies have focussed on key success factors, as their findings have not been consistent. The purpose of this study is to investigate the determinants of technological start-ups' performance. The first aim of this study is intended to explores impact of entrepreneurs' characteristics, technological capabilities and network on firm performance. The second aim is to examine the causal relationships among latent variables with firm performance and with the use of path analysis. For this study, information has been gathered through surveys from entrepreneurs of 701 Korean technological start-up companies. As for analysis of the data, SPSS 18.0 OK for Windows and AMOS 4.0 were used for testing of hypothesis. Results of the hypothesis testing are summarized as follows: First, it was found that entrepreneurs' characteristics, technological capabilities and network had statistically significant influence on firm performance. Second, entrepreneurs' characteristics had significant influence on technological capabilities and network. Third, network did not have significant influence on technological capabilities. The major contributions of this study are (1) identifying the determinants on firm performance of technology-based start-ups by means of structural equation model, (2) verifying effects on firm performance of technology-based start-ups by the variables.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.8
• /
• pp.1148-1154
• /
• 2012

A novel two-phase anaerobic treatment technology was developed to treat high-concentration organic cassava bioethanol wastewater. The start-up process and contribution of organics (COD, total nitrogen, and $NH_4^+$-N) removal in spatial succession of the whole process and spatial microbial diversity changing when sampling were analyzed. The results of the start-up phase showed that the organic loading rate could reach up to $10kg\;COD/m^3d$, with the COD removal rate remaining over 90% after 25 days. The sample results indicated that the contribution of COD removal in the pre-anaerobic and anaerobic phases was 40% and 60%, respectively, with the highest efficiency of 98.5%; TN and $NH_4^+$-N had decreased to 0.05 g/l and 0.90 g/l, respectively, and the mineralization rate of total nitrogen was 94.8%, 76.56% of which was attributed to the anaerobic part. The microbial diversity changed remarkably among different sample points depending on the physiological characteristics of identified strains. Moraxellaceae, Planococcaceae, and Prevotellaceae were dominant in the pre-anaerobic phase and Bacteroidetes, Campylobacterales, Acinetobacter, Lactobacillus, Clostridium, and Bacillus for the anaerobic phase. Methanosarcinaceae and Methanosaeta were the two main phylotypes in the anaerobic reactor.

• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.62-68
• /
• 2016

Laser welding has superior characteristic such as low distortion, high welding speed, easy automation and real time control. But it is easy to occur weld defects such as porosity, crater, humping bead in the area of welding start and end. These weld defects can be suppressed by applying the wave shape control. In this study CW fiber laser was used for welding of $0.5mm^t$ pure titanium. Penetration properties were evaluated with the time of slope up and down. After then the bead shape was observed, and the maximum depth and the area of crater were measured. The bead shape of welding start area changed to be sharp with increase of slope up time and non-weld area of welding start increased. The crater and humping bead were suppressed with slope down time. The cooling rate of crater area was understood through measure of the hardness. Also, The distribution tendency of alloying elements was observed by EPMA and EDS. When wave shape control didn't applied to weld, the hardness of end weld increased due to rapid cooling rate and the hardness of rear part in the crater was higher than that of fore part. On the other hand, when the wave shape control was used for end weld, the increase of hardness in the end weld couldn't be found due to gradual cooling rate.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.2
• /
• pp.109-121
• /
• 2021

With the recent increase in senior retirement, and senior start-ups are becoming more active due to high interest in start-ups. Research on young entrepreneurship, including college students, is being actively conducted, but most of the preceding research on senior entrepreneurship was conducted mainly on personal characteristics and social environment, and there were not many empirical studies on the influencing factors of entrepreneurship support policies. In this study, research and discussion on the entrepreneurial support policy and entrepreneurial competence as the influencing factors of senior entrepreneurship. As the independent variable of this study, the founder's competency was adopted as two factors: technical competence and creative competency, and the entrepreneurial support policy was divided into education support and funding support. Mentoring was set as a controlling variable and entrepreneurial intention was set as a dependent variable. A total of 232 questionnaires collected from seniors in their 40s or older were empirically analyzed. To verify the hypothesis of the study, SPSS 23 was used for exploratory factor analysis and regression analysis, and Process 3.4 was used for moderation effect. As a result of the study, it was found that the factors of technical competence, creative competence, educational support, and funding all have a significant influence on the will of entrepreneurship. It was found that creative competency(𝛽=.318), funding support(𝛽=.188), educational support(𝛽=.152), and technical competence(𝛽=.139), in this order, influenced the entrepreneurial intention. It was verified that the moderating effect of mentoring was significant between technical competence, creative competence, and entrepreneurial intention, but the moderating effect of mentoring between educational support, funding and entrepreneurial intention was not. The implications of this study will contribute to the research of senior start-up support policies, institutional supplementation, and differentiated start-up support programs by studying the factors of senior start-up capabilities and start-up support policies. It is also believed that it will contribute to the search for ways to increase creative capabilities that have a high influence on the willingness to start a business and the expansion of mentoring functions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.133-142
• /
• 2023

The large process plant is currently implementing predictive maintenance technology to transition from the traditional Time-Based Maintenance (TBM) approach to the Condition-Based Maintenance (CBM) approach in order to improve equipment maintenance and productivity. The traditional techniques for predictive maintenance involved managing upper/lower thresholds (Set-Point) of equipment signals or identifying anomalies through control charts. Recently, with the development of techniques for big analysis, machine learning-based AAKR (Auto-Associative Kernel Regression) and deep learning-based VAE (Variation Auto-Encoder) techniques are being actively applied for predictive maintenance. However, this predictive maintenance techniques is only effective during steady-state operation of plant equipment, and it is difficult to apply them during start-up and shutdown periods when rises or falls. In addition, unlike processes such as nuclear and thermal power plants, which operate for hundreds of days after a single start-up, because the pumped power plant involves repeated start-ups and shutdowns 4-5 times a day, it is needed the prediction and alarm algorithm suitable for its characteristics. In this study, we aim to propose an approach to apply the optimal predictive alarm algorithm that is suitable for the characteristics of Pumped Storage Power Plant(PSPP) facilities to the system by analyzing the predictive maintenance techniques used in existing nuclear and coal power plants.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.81-93
• /
• 2023

Under the digital economy, companies are facing a new business environment. Previous studies with a traditional perspectives on start-ups explained they are at a disadvantaged compared to large companies in mobilizing resources and building new relationships. However, recent researches on the digital economy and platform ecosystems have suggested that digital platforms can be an efficient means of overcoming the liabilities of smallness and newness for start-up companies. Through platforms start-ups can secure routes to mobilize resources, collect and analyze market information. Especially as various platorms are established within categorized industry or market, unique characteristics and market awareness regarding an individual startup company have been formed. Accordingly there is also an advantage that startup companies have umbrella effect by participating in the platform. From this point of view, this study describes the process by which a start-up company effectively utilizes a platform to overcome the liabilities of newness and smallness through the case the study of 'Genie the Bottle'. The results suggest that platforms play a crucial role for start-ups to secure awareness and legitimacy and grow the market in the beauty industry in which high consumer involvement is dominant.