• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.900-903
• /
• 2003

An identification method of induction motor parameters such as rotor time constant and mutual inductance at standstill condition is discussed assuming that stator resistance and leakage has already been obtained applying two different DC voltage and single phase voltage to the induction motor, respectively. This proposed scheme is implemented by means of Model Reference Adaptive Control (MRAC) technique, which uses a rotor flux equation in voltage model as a reference model and one in current model and is demonstrated through experiment.

• 전력전자학회논문지
• /
• 제13권6호
• /
• pp.403-410
• /
• 2008

본 논문에서는 벡터제어에 필요한 유도전동기의 상수를 정지 상태에서 부가적인 신호 주입을 이용하여 추정하는 방법을 제안하였다. 농형 유도전동기 회전자 바의 표피효과를 수학적으로 모델링을 하고 분석하였다. 상수 추정을 위해 정지 상태에서 두 가지의 서로 다른 주파수의 신호를 주입한다. 전동기의 초기 상수를 알지 못하므로 개-루프 전압 주입방법 대신 폐-루프 전류제어 방법을 이용한다. 이 방법은 전기적 사고를 미리 방지할 수 있으므로 개-루프 전압 주입방법 보다 안전하다. 그리고 유도전동기의 상수 추정에 심각한 영향을 주는 위상지연효과를 보상하기 위한 오프라인 시험방법을 제안하였다. 그리고 제안된 상수 추정 방법의 타당성을 증명하기 위해 세 가지 용량의 유도전동기에 대해 실험을 수행하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권4호
• /
• pp.151-157
• /
• 2001

This paper presents an identification method of parameters of induction motor which is driven by PWM voltage inverter. The method uses least square estimation based on the step voltage input and current response. Utilizing the fact that ratio of two characteristic roots is large in the induction motor circuit, we derived two 1st-order difference equations for direct computation of parameter values. experimental results are compared with conventional motor test results to demonstrate that the proposed method is capable of estimating parameters of induction motor at standstill.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.13-20
• /
• 2020

Accurate parameters based on equivalent circuit are required for high-performance field-oriented control in a three-phase induction motor. In a normal case, stator resistance can be accurately measured using a measuring equipment. Except for stator resistance, all machine parameters on the equivalent circuit should be estimated with particular algorithms. In the viewpoint of traditional regions, the parameters of an induction motor can be identified through the no-load and standstill test. This study proposes an identification method that uses the d-axis model of the induction motor in a stationary frame with the predefined information on stator resistance. Mutual inductance is estimated on the rotational dq coordination similar to that in the traditional no-load experiment test. The leakage inductance and rotor resistance can be estimated simply by applying different voltages and frequencies in the d-axis model of the induction motor. The proposed method is verified through simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.723-725
• /
• 2000

This paper presents a parameter identification method to estimate the stator resistance. stator inductance, rotor resistance and rotor inductance of the induction motor. A step voltage is applied across the stator terminals while the machine is in the standstill condition, and the resulting stator voltage and current response are measured. Observer/Kalman Filter Identification(OKID) algorithm is used to estimate induction motor parameters. Simulation results are presented to verify the identified model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.173-175
• /
• 2004

This paper presents a novel design of a self tuning PI controller of induction motor using fuzzy control. In this approach, the fuzzy tuning of a PI controller gains is achieved through fuzzy rules deduced from many robustness simulation tests applied to several induction motors, for a variety of operating conditions such as response to speed command from standstill, step load torque application and speed variations, with nominal parameters and an changed rotor resistance, self inductance and inertia. Simulation results on a speed controller of induction motor are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.