• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.581-588
• /
• 2015

In this paper, we researched that setting standard for RSC(Radar Cross Section) of naval surface ship could be determined and considered in various ways on ship's survivability, technical building feasibility, operation and so on. This study presented fundamental capacity on anti-ship missile, radar, flight and so no and the procedure to set of target/standards for RSC. The RCS standards is good at setting low as low as to improve survivability aspect, but because we should consider effect, technical limit, cost etc, this paper analyzed necessary elements to set standard than to suggest specific number and suggested procedure to set standars according to suggest the boundary of RCS.

• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.34-42
• /
• 2014

The early post-war modern architecture introduced to Korea in the 60's and 70's have reached its 50 year cycle to emerge as candidates for the registered heritage. However, conservation is a complicated topic when applied to modern architecture due to its social and political status among general public, and is often a sacrificial target for demolition or insensitive alteration. This research tries to identify significant values extracted from the intrinsic characteristics of modern architecture, that can be applied to conducting successful renovation projects on modern architecture. The conservational values of modern architecture to be maintained are identified in this paper as: flexible open space, material and structural system, and extension of interior-exterior relation. These values are examined through the filter of comparative analysis on domestic and international conservation standards, along with cross-examination on recently renovated local works performed on the modern architecture of the period. This research aims to bring focus on conducting respectful conservation and renovation to modern architecture by identifying the significant values that is intrinsic to the modern architecture and is worth preserving.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.2
• /
• pp.83-91
• /
• 2021

Seismic designs for Korean nuclear power plants (NPPs) under earthquakes' design basis are noticed due to the recent earthquake events in Korea and Japan. Japan has developed the technologies and experiences of the NPPs through theoretical research and experimental verification with extensively accumulated measurement data. This paper describes the main features of the design-time history complying with the Japanese seismic design standard. Proper seed motions in the earthquake catalog are used to generate one set of design time histories. A magnitude and epicentral distance specify the amplitude envelope function configuring the shape of the earthquake. Cumulative velocity response spectral values of the design time histories are compared and checked to the target response spectra. Spectral accelerations of the time histories and the multiple-damping target response spectra are also checked to exceed. The generated design time histories are input to the reactor building seismic analyses with fixed-base boundary conditions to calculate the seismic responses. Another set of design time histories is generated to comply with Korean seismic design procedures for NPPs and used for seismic input motions to the same reactor containment building seismic analyses. The responses at the dome apex of the building are compared and analyzed. The generated design time histories will be also applied to subsequent seismic analyses of other Korean standard NPP structures.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.2
• /
• pp.95-103
• /
• 2014

The current AISC341-10 standard specifiesa value of 0.02 radian for the minimum rotation capacity of connections for the intermediate steel moment frame system. However, despite of the advances realized in the domains of performance evaluation method and analysis method, research onthe minimum rotation capacity of the intermediate steel moment frame systemsatisfying the seismic performance has not been conducted in detail. In this study, the intermediate moment frame systemisdesigned with respect to current standards and the seismic performance in accordance with the rotational capacity of connections is evaluated using the seismic performance evaluation method presented in FEMA-P695. The minimum rotation capacity of intermediate steel moment frames required to satisfy seismic performance as well as the major design values affecting the seismic performance of moment frame areestimated. To that goal, the design parameters are selected and various target frames are designed. The analysis models of the main nonlinear elements are also developed for evaluating seismic performance. The resultsshow that the 20-story structure doesnot meet the seismic performance even if it satisfies the rotation capacity of 0.02 radian.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.358-373
• /
• 2009

Probability based design(PBD)method has some advantages against current design methods. First, it can provide the quantitative values for the structural safety or capacity through the reliability index, $^{\beta}$. That presented the certainty on the corresponding structure for the designer or user, also that permitted the broad consideration in the safety of structures. In addition, it can give the quantitative lifetime of the related structure in the calculation process of target reliability index. Also, incidental economical efficiency can be expected because decrease of required structural material can be obtained by using the practical material data. Unlikely current deterministic structural design methods, main advantage is the reflection of real condition in the structural design process by application of the data with not small clear specimen but structural size material. Advanced countries, namely America, Canada, Europe, Australia and New Zealand already converted from allowable stress design(ASD) method to PBD method and used as a standard wooden structures code in the late 1980s and 1990s. Other domestic constructions standards such as the steel or concrete constructions accepted and used the PBD methods already. Accordingly, wooden structural design method also should be converted from deterministic ASD to probabilistic LRFD(Load and resistance factor design) in order to keep pace with worldwide demands for PBD. Hence, to suggest the reason of introduction the PBD in domestic wooden structural design and analysis, a brief example was used to show the different reliability index by using the different design methods. Definition, merits and demerits of deterministic ASD and probabilistic LRFD were followed. Also the three examples were presented to show the similarity and differences between ASD and LRFD. Finally, connection problems that might cause a disputation in wooden structural design and analysis were broadly examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.4
• /
• pp.11-20
• /
• 1983

This study investigates reliability based design criteria for the spiral R.C. columns, and proposes practical algorithm which is based on Ellingwood's algorithm for the reliability analysis and the derivation of reliability based design criteria. Cornell's MFOSM theory is used for the derivation of the algorithm for the evaluation of uncertainties associated with resistances, whereas the magnitude of the uncertainties associated with load effects are chosen primarily by considering our level of practice. And thus the uncertainties so obtained are applied for the relilability analysis and the derivation of reliability based design criteria. A target reliability (${\beta}_0=3.5$) is selected as an appropriate value by comparing the values used in foreign countries and by analyzing, the reliability levels of our current USD and WSD design standards. Then, a set of load and resistance factors corresponding to the target reliability is proposed as a reliability based design provision, and furthermore a set of allowable stresses for reinforcing steel and concrete having same level of reliability with the corresponding LRFD criteria is also propared for the current WSD design provision. It may be concluded that the proposed LRFD reliability based design provisions and the corresponding allowable stresses give more rational design than the current code for spiral R.C. columns.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.8
• /
• pp.1364-1377
• /
• 2010

Although the human body is a biological subject with definite and distinctive physical features, its actualization and perception differs among societies. The aesthetics of the human body are based on diverse cultural perceptions that must be considered prior to design development. This study establishes the foundations of newly adopted concepts of beauty that are presumed to have been established in the first half of the twentieth century that continue to affect our mindset even now. The research includes human figures in the articles of women's magazines and cosmetic advertisements in the early $20^{th}$ century. The results are as follows: First, the change of perception in the human body: Instead of being a subject of preservation, the body has become a subject of sculpture with emphasis on health in the 1920's and on beauty in the 1930's. The recognition of the importance of the body has created intensive attention on physical training and an increased sense of hygiene. The body exposed to the public perceives itself through the eyes of others that alter one's own perception of oneself as well as become a target of evaluation. There is an additional emphasis on the exotic eroticism of a passive subordinate. Western culture became the standard for modernization along with the dissociation of traditional standards and values. Through the effect of education and western thinking, the awareness of women's rights and self-appreciation was developed. Second, ideal beauty can be summarized as follows: Unprocessed natural beauty was extolled as ideal in the 1920's, but the 1930's, it highlighted big eyes and an aquiline nose that are the characteristics of western women. Taking care of one's appearance was recognized as an important value for every social class. Cosmetics and skin care treatments promised soft and white skin. In contrast to western cosmetics, dark and shiny hair was highly favored. Exercising and traveling, differing seasonal and regional skin treatments were also widely accepted. In its initial stages, the research had originally assumed that the beginning of the twentieth century would be a time in which traditional concepts of beauty and new, westernized aesthetics coexisted. However, as the research progressed, it was clear that the idea of beauty had already adopted occidental ideals by that time. Thus, it seems necessary to continue the study on the shifting paradigms of beauty that must have occurred in the nineteenth and late twentieth century.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.12-17
• /
• 2009

This paper presents a tag emulator for a UHF band RFID system. The tag emulator supports the 1800-6C and EPC global class 1 generation 2 standards. The transmitted signal from a reader is generated using the PIE coding and ASK modulation methods. Signals of a tag are from the FM0 coding and ASK modulation methods. The ARM7 processor carries out the overall control of the system and signal analysis of incoming data. The verification of the tag emulator employs the application platform implemented in C++. Users can define parameter values for protocol during the application run. The tag emulator presented in this paper allows evaluating various design alternatives of the target RFID system in real applications.