• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.8-15
• /
• 2019

Korea's R&D investment has significantly increased in recent years and the quantitative outputs such as number of papers and patents have also increased with the investment. However, the quality of R&D outputs has not been fully addressed. In particular, quality of technical performance, such as the quality of patents, has attracted little attention. In this paper, a Data Envelopment Analysis (DEA) method was used to construct models for efficiency analysis of R&D investment, focused on quality of technical performance. Indices were proposed to analyze the quantitative and qualitative efficiencies of R&D investment. In order to effectively analyze R&D efficiencies, the measurement units of the input and output variables were standardized. Based on cases of livestock quarantine R&D projects of Korea, the quantitative and qualitative efficiencies of national R&D projects were analyzed and factors that would influence R&D efficiencies were identified. This paper suggests that both quantitative and qualitative efficiencies should be considered when measuring R&D efficiency. Also, it is recommended to carefully consider the characteristics of R&D projects during project selection stage.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.349-364
• /
• 2017

Purpose: The purpose of this study is to analyze quality control strengthening pilot project in development stages of weapon systems which ensures zero-defect. In order to achieve that, we propose collaboration support system between related organizations. Methods: First, we analyze how quality control methods has been developed from reviewing the preliminary study in commercial and defense industry. Then, we suggest improvement plans for quality control in defense industry and propose a pilot study which able to improve the recognized problems. Results: The results of this study ensures the participants in defense industry recognize the importance of quality control and form a consensus by sharing a case study. Finally, we propose the standardized work process by utilizing manual and manpower dispatching. Conclusion: As a result, this study clarifies the scope and role of relevant organizations to achieve the defense quality assurance in the total life cycle(TLC). Also, this paper guides the collaboration system between the relevant organization which differs from the commercial industry currently divided into development-production-quality.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2015

Purpose: This study investigated the relationships of handwriting legibility and perceptual-motor skills, and handwriting speed and perceptual-motor skills. And identified the predictors that most affect the handwriting of preschool children. Methods: Twenty-three typically developing preschool aged children (mean age: 68.61 months, SD=2.04) were selected through the Korean-Denver Developmental Screening Test-2(K-DDST-2). The children were tested with regard to handwriting legibility, visual perception, visual-motor integration and fine-motor coordination. Results: First, a significant relationship was not found among handwriting legibility, visual perception, visual-motor integration and fine-motor coordination. Second, a significant relationship was found among handwriting speed, visual perception and fine-motor coordination. Third, stepwise multiple regression analyses showed that general visual perception were significant predictors for handwriting speed. Conclusion: Occupational therapists should evaluate children's visual perception levels utilizing a standardized test, and focus on general visual perception in order to improve handwriting skill(speed). Also, occupational therapists are expected to play an important role in the management and treatment of children's handwriting skills.

• Agribusiness and Information Management
• /
• v.7 no.2
• /
• pp.12-18
• /
• 2015

Since 2000s, proper utilization of IoT (Internet of Things) technology is a key factor for a firm to become more competitive, and this stream is not exceptional for the food and agriculture industry. Along with this stream, Korea government organization, for example MAFRA (Ministry of Agriculture, Food and Rural Affairs), elected to adopt IoT technology, such as USN and RFID technologies, in the food and agriculture industry. Based on the IoT technology, MAFARA launched six "IoT based farm" project in 2007. IoT based farm project includes IoT based greenhouse system project, and it shows drastic efficiency in terms of cost reduction. When it comes to the productivity, however, the effect of IoT based greenhouse system is still ambiguous. In this regard, this study conducted systems analysis and design for IoT based tomato greenhouse in order to help farmers' decision making related to the productivity by establishing standardized database structure and designing output form to analyze productivity indices. Proposed systems analysis and design can be utilized as a data analysis tools by farmers. Productivity data from the proposed systems is can be used by researchers to identify the relationship among environment, plant growth and productivity. Policy makers also can refer to the data and output forms to predict the quantity of fruit during certain period and to revise production guideline more precisely.

• Journal of Information Management
• /
• v.32 no.2
• /
• pp.40-53
• /
• 2001

The purpose of this study is to explore the current situation and problems in standardizing knowledge information and information technology in the KISTI, and collect the basic data necessary for establishing the national information infrastructure. Through a survey and interviews with nine departments of the Information Services Sector of the KISTI, data were collected regarding the management and exchange of information and the operation of communication networks. According to the analysis of fifty KISTI databases and their operation, tasks to be first standardized include Classification of ST resources, Metadata, Date modeling, Data format, DBMS, ST terminology, and Retrieval protocol.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.95-103
• /
• 2009

Recently the information system introduction and the application which use the computer are increasing. The efficient operation of information system helps corporations to improve productivity, customer service and corporate competitive power. SaaS(Software as a Service), which is the developed type of outsourcing in the area of information technology, is to use standardized and packaged application by hosting from the outside of enterprise. SaaS is not developed yet as much as people's interest about that in the initial stage, but its related technology and service capacity are accumulated after repeated trial and error, and it's ready to activate the industry. In the area of information system, studies on the measurement of service quality were followed. But there is little study on service quality measurement in the field of SaaS(Software as a Service). The purpose of this study was to divides the SaaS with e-SERVQUAL and it consider the relationship with the perceived recognition and the usage intention. According to this, variables of traditional research were rejected because SaaS is not developed yet in Korea. But information had a strong effect on perceived recognition. Therefore, business related with in SaaS must have provided a correct information about various applications.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.278-286
• /
• 2015

Fashion industry has tried to adopt the virtual garment technology to reduce the time and effort spent on sample creation. For garment manufacturers to adopt the virtual garment technology as an alternative to sample creation, 3D avatars that meet the needs of each brand should be developed. Virtual garment softwares that are available in the market provide avatars with standardized body models and allow to modify the size by manually entering size specifications. This study proposed a methodology to develop size specifications for 3D avatars as well as brand-customized production sizes. For this, a man's fashion brand which is using virtual garment technology is selected. And the Size Korea database is used to develop size specification based on the customers' body shape. This study developed regression equations on body size specifications, which in turn proposed a regression model to proportionately change size specifications of 3D fitting-models. Based on the each body size calculated by the regression model, a standard model is created, and the skeleton-skin algorithm is applied to the regression model to obtain the results of size changes. Then, the 3D model sizes are tested for size changes as well as measured, which verifies that the regression model reflects body size changes.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.172-177
• /
• 2008

Biometrics is essential for person identification because of its uniqueness from each individuals. Face recognition technology has advantage over other biometrics because of its convenience and non-intrusive characteristics. In this paper, we will present a overview of face recognition technology including face detection, feature extraction, and face recognition system. For face detection, we will describe template based method and face component based approach. PCA and LDA approach will be discussed for feature extraction, and nearest neighbor classifiers -will be covered for matching. Large database and the standardized performance evaluation methodology is essential in order to support state-of-the-art face recognition system. Also, 3D based face recognition technology is the key solution for the pose, lighting and expression variations in many applications.

• Journal of the Korean housing association
• /
• v.23 no.4
• /
• pp.49-57
• /
• 2012

This study was conducted to apply the modular construction method to Han-ok. The modular method, which is differentiated from the existing one, means a construction method that equipments, windows and interior materials are prefabricated as a six-sided object at a plant and then they are assembled at the least process on the spot. As for the theoretical observation, the theoretical basis to apply the modular method to the modular housing and Hanok was divided into environmental and economic aspect. In order to apply the modular method to Hanok, the unit scale and size were selected and the plane of unit module Hanok was developed. And a standard with regard to the unit combination and material lifting transportation method was set and planned. In addition, through the comparison the unit modular Hanok to the existing Hanok, the difference was analyzed and the strength was identified in terms fo design method, structure, construction method, period and cost. In final, the conclusion, with regard to the economic, technical application in future, was drawn through arranging the study contents. The unit modular Hanok to carry out the high-quality dwelling through construction period reduction, standardized construction materials and improved insulation performance can meet the demands for a paradigm of new construction technology.

• The Journal of Information Technology
• /
• v.2 no.1
• /
• pp.177-190
• /
• 1999

In this paper I tried to explain and survey various aspects of the Physical Distribution Service through EDI based on Automated Cargo Clearance System of Japan. As the world import-export System have gradually standardized, the Japanese system on air and sea cargo clearance system will effect on Korea promoting rationalization policy of harbor, electronic or automatic technology of import-export Clearance System. Because the rational reform of the present cargo transportation system of Korea might have been inevitable in the growth of a global Electronic Data System, Therefore the object of the paper is to suggest policy direction and provide the necessary of the Nippon Automated Cargo Clearance System, that is, NACCS about air and sea Cargo Clearance System. The most important thing in this study is that the author put the stress on research and analyzes of the application in Korea.